WebCPC CPC COOPERATIVE PATENT CLASSIFICATION

E06B　FIXED OR MOVABLE CLOSURES FOR OPENINGS IN BUILDINGS, VEHICLES, FENCES OR LIKE ENCLOSURES IN GENERAL, e.g.

E06B 1/00 Border constructions of openings in walls, floors, or ceilings; Frames to be rigidly mounted in such openings (E06B 5/00 takes precedence; features relating also to inner frames or wing frames, features relating solely to the mounting of inner frames E06B 3/00; corner joints or edge joints E06B 3/96)

E06B 1/003 ・{Cavity wall closers; Fastening door or window frames in cavity walls (lintels E04C 3/02)}

E06B 1/006 ・{of curvilinear outline}

E06B 1/02 ・Base frames, i.e. template frames for openings in walls or the like, provided with means for securing a further rigidly-mounted frame; Special adaptations of frames to be fixed therein {(E06B 1/003, E06B 1/24 take precedence; fastening door or window frames per se E06B 1/56)}

E06B 1/04 ・Frames for doors, windows, or the like to be fixed in openings ({of curvilinear outline E06B 1/006;} special adaptations for fixing in base frames E06B 1/02; features relating solely to the mounting of glass panes or other sheets E06B 3/00)

E06B 1/045 ・・{with separate wing abutment strips, e.g. ajustable; Door stops (sealing arrangements E06B 7/16)}

E06B 1/06 ・・Wooden frames

E06B 1/08 ・・・composed of several parts with respect to the cross-section of the frame itself

E06B 1/10 ・・・・adjustable with respect to the thickness of walls

E06B 1/12 ・・Metal frames

E06B 1/14 ・・・of special cross-section (E06B 1/18, E06B 1/22 take precedence){not used}

E06B 1/16 ・・・・Hollow frames

E06B 1/18 ・・・composed of several parts with respect to the cross-section of the frame itself

E06B 1/20 ・・・・adjustable with respect to the thickness of walls

E06B 1/22 ・・・with integral thresholds of special form

E06B 1/24 ・・Frames of natural stone, concrete, or other stone-like material

E06B 1/26 ・・Frames of plastics

E06B 1/28 ・・・Hollow frames (E06B 1/30 takes precedence)

E06B 1/30 ・・・composed of several parts with respect to the cross-section of the frame itself

E06B 1/32 ・・Frames composed of parts made of different materials

E06B 1/325 ・・・{comprising insulation between two metal section members}

E06B 1/34 ・・Coverings, e.g. protecting against weather, for decorative purposes

E06B 1/342 ・・・{Reveal covering members disposed alongside of a window frame}

E06B 1/345 ・・・{Renovation window frames covering the existing old frames}

E06B 1/347 ・・・{Renovation door frames covering the existing old frames}

E06B 1/36 ・・Frames uniquely adapted for windows

E06B 1/363 ・・・{Bay windows}

E06B 1/366 ・・・{Mullions or transoms therefor}

E06B 1/38 ・・・for shop, show, or like large windows

E06B 1/40 ・・・Frames with parts removable to admit the glass (E06B 1/38 takes precedence)

E06B 1/52 ・・Frames specially adapted for doors

E06B 1/522 ・・・{for overhead garage doors}

E06B 1/524 ・・・{Mullions; Transoms}

E06B 1/526 ・・・{for door wings that can be set up to open either left or right, outwards or inwards, e.g. provided with grooves for easily detachable hinges or latch plates (locks therefor E05B 63/04; hinges therefor E05D 7/02)}

E06B 1/528 ・・・{with ducts for cables or pipes}

E06B 1/56 ・Fastening frames to the border of openings {or to similar contiguous frames (E06B 1/003 takes precedence)}

E06B 1/58 ・・by filling up the joints, e.g. by cementing

E06B 1/60 ・・by mechanical means, e.g. anchoring means

E06B 1/6007 ・・・{between similar contiguous frames (bay windows E06B 1/363)}

E06B 1/6015 ・・・{Anchoring means (E06B 1/6007, E06B 1/6046 to E06B 1/6092 take precedence)}

E06B 1/6023 ・・・・{completely hidden between the frame and the border of the opening, at least part of the means being previously fixed to the wall (E06B 1/6038 takes precedence)}

E06B 1/603 ・・・・・{adjustable}

E06B 1/6038 ・・・・{specially adapted for being embedded in the wall}

E06B 1/6046 ・・・{Clamping means acting perpendicular to the wall opening; Fastening frames by tightening or drawing them against a surface parallel to the opening (E06B 1/6007 takes precedence)}

E06B 1/6053 ・・・・{the frame being moved perpendicularly towards the opening and held by means of snap action behind a protrusion on the border of the opening}

E06B 1/6061 ・・・・{with separate clamping means acting on opposite wall or associated surfaces}

E06B 1/6069 ・・・{Separate spacer means acting exclusively in the plane of the opening; Shims; Wedges; Tightening of a complete frame inside a wall opening (E06B 1/6084 takes precedence)}

E06B 1/6076 ・・・・{of screw-type}

E06B 1/6084 ・・・{Mounting frames elastically, e.g. with springs or other elastic material, between the wall and the frame (E06B 1/6046 takes precedence)}

E06B 1/6092 ・・・{Fastening door frames to the floor or ceiling; Jamb feet; Cross members uniting the jamb feet (E06B 1/70 and E06B 3/9632 take precedence)}

E06B 1/62 ・Tightening or covering joints between the border of openings and the frame {or between contiguous frames}(E06B 1/34 takes precedence)

E06B 1/64 ・・by loosely-inserted means, e.g. strip, resilient tongue

E06B 1/66 ・・by labyrinth packings

E06B 1/68 ・・by profiled external parts

E06B 1/70 ・Sills; Thresholds

E06B 1/702 ・・{Window sills}

E06B 1/705 ・・・{End-caps therefor}

E06B 3/00 Window sashes, door leaves, or like elements for closing {wall or like} openings; Layout of fixed or moving closures, e.g. windows {in wall or like openings}; Features of rigidly-mounted outer frames relating to the mounting of wing frames (E06B 5/00 takes precedence; shutters or the like E06B 9/00; glass panes C03)

E06B 3/01 ・Removable or disappearing walls for hangars or other halls, e.g. for aircraft (wall constructions E04B 2/00)

E06B 3/02 ・Wings made completely of glass {(E06B 3/4681 takes precedence)}

E06B 3/025 ・・{consisting of multiple glazing units (units per se E06B 3/66)}

E06B 3/04 ・Wing frames not characterised by the manner of movement (features relating to the manner of movement E06B 3/32)

E06B 3/06 ・・Single frames

E06B 3/08 ・・・Constructions depending on the use of specified materials (E06B 3/24 takes precedence)

E06B 3/10 ・・・・of wood

E06B 3/105 ・・・・・{reinforced}

E06B 3/12 ・・・・of metal

E06B 3/14 ・・・・・of special cross-section {not used, see subgroup and E06B 3/12}

E06B 3/16 ・・・・・・Hollow frames {of special construction, e.g. made of folded sheet metal or of two or more section parts connected together}

E06B 3/163 ・・・・・・・{with a filled cavity}

E06B 3/18 ・・・・of concrete or other stone-like material

E06B 3/20 ・・・・of plastics

E06B 3/205 ・・・・・{moulded or extruded around a core}

E06B 3/22 ・・・・・Hollow frames {(E06B 3/205 takes precedence)}

E06B 3/221 ・・・・・・{with the frame member having local reinforcements in some parts of its cross-section or with a filled cavity}

E06B 3/222 ・・・・・・・{with internal prefabricated reinforcing section members inserted after manufacturing of the hollow frame}

E06B 3/223 ・・・・・・・・{the hollow frame members comprising several U-shaped parts assembled around a reinforcing core member}

E06B 3/24 ・・・specially adapted for double glazing (separable parts for securing panes E06B 3/64)

E06B 3/26 ・・Compound frames, i.e. one frame within or behind another (E06B 3/28 takes precedence; arrangements of movable frames E06B 3/32)

E06B 3/2605 ・・・{with frames permanently mounted behind or within each other, each provided with a pane or screen}

E06B 3/263 ・・Frames with special provision for insulation

E06B 3/26301 ・・・{with prefabricated insulating strips between two metal section members (with two metal frame members having interpenetrating or overlapping parts when mounted E06B 3/26336; combined with insulating elements formed in situ E06B 3/2675)}

E06B 3/26303 ・・・・{with thin strips, e.g. defining a hollow space between the metal section members}

E06B 3/26305 ・・・・{Connection details (deformation of portions of the metal frame members E06B 3/273; expansion of the extremities of the insulating elements E06B 3/277)}

E06B 3/26307 ・・・・・{Insulating strips and metal section members both having L-shaped ribs, the engagement being made by a movement transversal to the plane of the strips}

E06B 3/2632 ・・・{with arrangements reducing the heat transmission, other than an interruption in a metal section}

E06B 3/26336 ・・・{with two metal frame members having interpenetrating or overlapping parts when mounted (involving sheet metal section members E06B 3/2735)}

E06B 3/26338 ・・・{comprising short insulating elements disposed at intervals}

E06B 3/2634 ・・・{without separate insulating elements, e.g. the heat transmission being reduced by a smaller cross-section}

E06B 3/26341 ・・・{comprising only one metal frame member combined with an insulating frame member}

E06B 3/26343 ・・・{with two or more separate insulating zones alternating with metal section members}

E06B 3/26345 ・・・{for wooden or plastic section members}

E06B 3/26347 ・・・{specially adapted for sliding doors or windows}

E06B 3/267 ・・・with insulating elements formed in situ

E06B 3/2675 ・・・・{combined with prefabricated insulating elements}

E06B 3/273 ・・・with prefabricated insulating elements held in position by deformation of portions of the {metal} frame members

E06B 3/2735 ・・・・{comprising a sheet metal member, an edge or which is bent over the edge of the other metal member with interposition of an insulating element}

E06B 3/277 ・・・with prefabricated insulating elements held in position by expansion of the {extremities of the} insulating elements

E06B 3/28 ・・with additional removable glass panes or the like, framed or unframed

E06B 3/285 ・・・{flexible transparent foils without a proper frame fixed and sealed at a distance from the existing glass pane}

E06B 3/30 ・Coverings, e.g. protecting against weather, for decorative purposes {(for door leaves E06B 3/7001)}

E06B 3/301 ・・{consisting of prefabricated profiled members or glass}

E06B 3/302 ・・・{Covering wooden frames with metal or plastic profiled members}

E06B 3/303 ・・・{Covering metal or plastic frames with wooden profiled members}

E06B 3/304 ・・・・{the frames consist of two metal section members with insulating zone in between}

E06B 3/305 ・・・{Covering metal frames with plastic or metal profiled members}

E06B 3/306 ・・・{Covering plastic frames with metal or plastic profiled members}

E06B 3/307 ・・・{Coverings with special provisions for insulation, e.g. foam filled}

E06B 3/308 ・・{Wing frames covered on the outside by a rigidly-mounted outer frame}

E06B 3/32 ・Arrangements of wings characterised by the manner of movement; Arrangements of movable wings in openings; Features of wings or frames relating solely to the manner of movement of the wing {fittings or supporting means, separable from the frame, for guiding or controlling the movement of wings, arrangements of wings characterised by particular forms of such means E05D}

E06B 3/325 ・・{Wings opening towards the outside}

E06B 3/34 ・・with only one kind of movement (E06B 3/48 takes precedence)

E06B 3/341 ・・・{Tilt-and-turn wings}

E06B 3/36 ・・・with a single vertical axis of rotation at one side of the opening, or swinging through the opening (wings requiring lifting before opening E06B 3/52)

E06B 3/362 ・・・・{Double winged doors or windows}

E06B 3/365 ・・・・・{Astragals for double doors}

E06B 3/367 ・・・・{specially adapted for furniture}

E06B 3/38 ・・・with a horizontal axis of rotation at the top or bottom of the opening {(E06B 3/5036 takes precedence)}

E06B 3/385 ・・・・{specially adapted for furniture}

E06B 3/40 ・・・with a vertical or horizontal axis of rotation not at one side of the opening, e.g. turnover wings

E06B 3/42 ・・・Sliding wings; Details of frames with respect to guiding {(E06B 3/26347 and E06B 3/92 take precedence)}

E06B 3/44 ・・・・Vertically-sliding wings

E06B 3/4407 ・・・・・[N : Single-hung, i.e. having a single vertical sliding panel]

E06B 3/4415 ・・・・・[N : Double-hung, i.e. with two vertical sliding panels]

E06B 3/4423 ・・・・・[N : disappearing in a wall pocket; Pockets therefor]

E06B 3/443 ・・・・・{specially adapted for furniture}

E06B 3/46 ・・・・Horizontally-sliding wings {(E06B 3/487 takes precedence)}

E06B 3/4609 ・・・・・{for windows (E06B 3/4654 to E06B 3/4681 take precedence)}

E06B 3/4618 ・・・・・・{the sliding wing being arranged beside a fixed wing (E06B 3/4627 takes precedence)}

E06B 3/4627 ・・・・・・{with the sliding wing flush closing or moving a considerable distance towards the opening when closing}

E06B 3/4636 ・・・・・{for doors (E06B 3/4609 and E06B 3/4654 to E06B 3/4681 take precedence; Sliding shower doors A47K 3/22F1C)}

E06B 3/4645 ・・・・・・{with the sliding wing flush closing or moving a considerable distance towards the opening when closing}

E06B 3/4654 ・・・・・{disappearing in pockets in the wall; Pockets therefor}

E06B 3/4663 ・・・・・{specially adapted for furniture}

E06B 3/4672 ・・・・・・{with the sliding wing flush closing or moving a considerable distance towards the opening when closing}

E06B 3/4681 ・・・・・{made of glass panes without frames (E06B 3/4663 takes precedence)}

E06B 3/469 ・・・・・{Arrangements at the overlapping vertical edges of the wings that engage when closing}

E06B 3/48 ・・Wings connected at their edges, e.g. foldable wings

E06B 3/481 ・・・{Wings foldable in a zig-zag manner or bi-fold wings}

E06B 3/482 ・・・・{specially adapted for furniture}

E06B 3/483 ・・・・{folding upwardly (E06B 3/482 takes precedence)}

E06B 3/485 ・・・{Sectional doors}

E06B 3/486 ・・・・{with hinges being at least partially integral part of the section panels}

E06B 3/487 ・・・・[N : sliding laterally]

E06B 3/488 ・・・・{with horizontal strengthening means; anti-sag devices}

E06B 3/50 ・・with more than one kind of movement (E06B 3/48 takes precedence){(E06B 3/92 takes precedence)}

E06B 3/5009 ・・・{where the sliding and rotating movements are necessarily performed simultaneously (E06B 3/5027, E06B 3/5036 take precedence)}

E06B 3/5018 ・・・・{where the pivot axis slides during pivoting of the wing}

E06B 3/5027 ・・・{"Austral" windows}

E06B 3/5036 ・・・{Louvre type windows, e.g. windows made of movable strips of glas}

E06B 3/5045 ・・・{specially adapted for furniture (E06B 3/52 takes precedence)}

E06B 3/5054 ・・・{where the sliding and rotating movements are independent of each other}

E06B 3/5063 ・・・・{the vertical sliding wings having the possibility of an additional rotational movement}

E06B 3/5072 ・・・・{the horizontal sliding wings having the possibility of an additional rotational movement}

E06B 3/5081 ・・・・{at least two wings have a different kind of movement}

E06B 3/509 ・・・{where one of the sliding and rotating movements necessarily precedes the other}

E06B 3/52 ・・・Wings requiring lifting before opening

E06B 3/54 ・Fixing of glass panes or like plates

E06B 3/5409 ・・{Means for locally spacing the pane from the surrounding frame}

E06B 3/5418 ・・{Permanently fixing of an additional unframed pane (compound frames E06B 3/2605)}

E06B 3/5427 ・・{the panes mounted flush with the surrounding frame or with the surrounding panes (E06B 3/5436 takes precedence; supporting structures for curtain walls E04B 2/885)}

E06B 3/5436 ・・{involving holes or indentations in the pane}

E06B 3/5445 ・・・{Support arms engaging the holes or indentations}

E06B 3/5454 ・・{inside U-shaped section members}

E06B 3/5481 ・・{by means of discrete fixing elements, e.g. glazing clips, glaziers points}

E06B 3/549 ・・{by clamping the pane between two subframes}

E06B 3/56 ・・by means of putty, cement, or adhesives only (E06B 3/64{E06B 5/54C} take precedence)

E06B 3/58 ・・by means of borders, cleats, or the like ({E06B 3/30}, E06B 3/64 take precedence)

E06B 3/5807 ・・・{not adjustable}

E06B 3/5814 ・・・・{together with putty or fixed by glue}

E06B 3/5821 ・・・・{hooked on or in the frame member, fixed by clips or otherwise elastically fixed (E06B 3/585 takes precedence)}

E06B 3/5828 ・・・・・{on or with auxiliary pieces}

E06B 3/5835 ・・・・・・{together with parts of the border in the same undercut groove in the frame (E06B 3/5842 takes precedence)}

E06B 3/5842 ・・・・{fixed by a tongue-and-groove or mortise-and-tenon connection substantially parallel to the pane}

E06B 3/585 ・・・{adjustable, e.g. for accomodating panes of various thickness, or with provisions for altering the clamping force on the pane (E06B 3/5871 takes precedence)}

E06B 3/5857 ・・・・{the fixing being adjustable, e.g. in one of several possible positions}

E06B 3/5864 ・・・・・{with adjusting screws, wedges or cams}

E06B 3/5871 ・・・{pivotally fixed on the frame; Borders with pivoting parts}

E06B 3/5878 ・・・{the borders being pre-assembled in a frame-like manner on the pane or on the frame before the pane is fitted to the frame (E06B 3/645 takes precedence)}

E06B 3/5885 ・・・{Corner arrangements for borders; Devices for making rounded corners}

E06B 3/5892 ・・・{Fixing of window panes in openings in door leaves}

E06B 3/60 ・・・of clamping cleats of metal

E06B 3/605 ・・・・{made of sheet metal}

E06B 3/62 ・・・of rubber-like elastic cleats

E06B 3/6202 ・・・・{positioned between adjoining panes without separate glazing bar}

E06B 3/6205 ・・・・{having on at least one lateral side no backing from a separate rigid glazing bead or other stiff part of the window frame}

E06B 3/64 ・・Fixing of more than one pane to a frame

E06B 3/645 ・・・{of units comprising two or more parallel panes to frames designed for single panes only, e.g. having too shallow a rabbet}

E06B 3/66 ・Units comprising two or more parallel glass or like panes permanently secured together {(reforming and uniting glass sheets by fusing C03B 23/00; joining glass to glass or to other materials C03C 27/00; laminated glass B32B 17/10)}

E06B 3/6604 ・・{comprising false glazing bars or similar decorations between the panes (connectors therefor E06B 3/6675)}

E06B 3/6608 ・・{without separate spacing elements (E06B 3/6707 and E06B 3/6715 take precedence)}

E06B 3/6612 ・・{Evacuated glazing units}

E06B 3/6617 ・・{one of the panes being larger than another}

E06B 3/6621 ・・{with special provisions for fitting in window frames or to adjacent units; Separate edge protecting strips (E06B 3/66347 takes precedence)}

E06B 3/6625 ・・・{molded on the edges}

E06B 3/663 ・・Element for spacing panes

E06B 3/66304 ・・・{Discrete spacing elements, e.g. for evacuated glazing units}

E06B 3/66309 ・・・{Section members positioned at the edges of the glazing unit}

E06B 3/66314 ・・・・{of tubular shape (E06B 3/66323 and E06B 3/66333 take precedence)}

E06B 3/66319 ・・・・・{of rubber, plastics or similar materials}

E06B 3/66323 ・・・・{comprising an interruption of the heat flow in a direction perpendicular to the unit}

E06B 3/66328 ・・・・{of rubber, plastics or similar materials (E06B 3/66314, E06B 3/66323 and E06B 3/66342 take precedence; transparent materials E06B 3/66333)}

E06B 3/66333 ・・・・{of unusual substances, e.g. wood or other fibrous materials, glass or other transparent materials}

E06B 3/66342 ・・・・{characterised by their sealed connection to the panes}

E06B 3/66347 ・・・・・{with integral grooves or rabbets for holding the panes (E06B 3/66366 takes precedence)}

E06B 3/66352 ・・・・・{with separate sealing strips between the panes and the spacer}

E06B 3/66357 ・・・・・{Soldered connections or the like}

E06B 3/66361 ・・・・{with special structural provisions for holding drying agents, e.g. packed in special containers}

E06B 3/66366 ・・・・{specially adapted for units comprising more than two panes or for attaching intermediate sheets}

E06B 3/66371 ・・・・{positioned entirely outside the gap between the panes}

E06B 3/66376 ・・・・{comprising lighting means}

E06B 3/667 ・・・Connectors therefor

E06B 3/6675 ・・・・{for connection between the spacing elements and false glazing bars}

E06B 3/67 ・・characterised by additional arrangements or devices for heat or sound insulation {or for controlled passage of light}

E06B 3/6707 ・・・{specially adapted for increased acoustical insulation (doors, windows for insulation against noise E06B 5/20)}

E06B 3/6715 ・・・{specially adapted for increased thermal insulation or for controlled passage of light (E06B 3/66323 takes precedence; coating of glass pains C03C 17/00; devices or arrangements for controlling the intensity, colour, phase, polarisation or direction of light G02F 1/00)}

E06B 3/6722 ・・・・{with adjustable passage of light}

E06B 3/673 ・・Assembling the units (E06B 3/677 takes precedence; {making hollow glass sheets or bricks C03B 23/24})

E06B 3/67304 ・・・{Preparing rigid spacer members before assembly}

E06B 3/67308 ・・・・{Making spacer frames, e.g. by bending or assembling straight sections (connectors E06B 3/667)}

E06B 3/67313 ・・・・・{by bending}

E06B 3/67317 ・・・・{Filling of hollow spacer elements with absorbants; Closing off the spacers thereafter}

E06B 3/67321 ・・・・{Covering spacer elements, e.g. with sealants}

E06B 3/67326 ・・・{Assembling spacer elements with the panes}

E06B 3/6733 ・・・・{by applying, e.g. extruding, a ribbon of hardenable material on or between the panes}

E06B 3/67334 ・・・・{by soldering; Preparing the panes therefor}

E06B 3/67339 ・・・{Working the edges of already assembled units}

E06B 3/67343 ・・・・{Filling or covering the edges with synthetic hardenable substances}

E06B 3/67347 ・・・・・{by extrusion techniques}

E06B 3/67352 ・・・・・{by forming techniques}

E06B 3/67356 ・・・・{Covering the edges with bands or profiles}

E06B 3/6736 ・・・・{Heat treatment (for soldering E06B 3/67334)}

E06B 3/67365 ・・・{Transporting or handling panes, spacer frames or units during assembly (E06B 3/67304 to E06B 3/67339 take precedence)}

E06B 3/67369 ・・・・{Layout of the assembly streets}

E06B 3/67373 ・・・・{Rotating panes, spacer frames or units}

E06B 3/67382 ・・・・{Transport of panes or units without touching the bottom edge}

E06B 3/67386 ・・・・{Presses; Clamping means holding the panes during assembly}

E06B 3/67391 ・・・{Apparatus travelling around the periphery of the pane or the unit}

E06B 3/677 ・・Evacuating or filling the gap between the panes; {Equilibration of inside and outside pressure}; Preventing condensation in the gap between the panes (by means of spacing elements E06B 3/663); Cleaning the gap between the panes

E06B 3/6775 ・・・{Evacuating or filling the gap during assembly}

E06B 3/68 ・Window bars {(bay windows E06B 1/363; joints for frame members crossing each other E06B 3/9628)}

E06B 3/685 ・・{False glazing bars (E06B 3/6604 takes precedence)}

E06B 3/70 ・Door leaves (wing frames E06B 3/04)

E06B 3/7001 ・・{Coverings therefor; Door leaves imitating traditional raised panel doors, e.g. engraved or embossed surfaces, with trim strips applied to the surfaces}

E06B 3/7003 ・・{consisting of several adjacent similar elements, e.g. planks, without outer covering panels}

E06B 3/7005 ・・・{without a separate supporting frame}

E06B 3/7007 ・・{Door leaves with curved, e.g. cylindrical or oval cross-section (E06B 3/7001 takes precedence)}

E06B 3/7009 ・・{Door leaves with two similar parts placed one above the other, pivoting separately}

E06B 3/7015 ・・{characterised by the filling between two external panels (fireproof doors E06B 5/16; noise insulating doors E06B 5/20)}

E06B 3/7017 ・・・{of grating type}

E06B 3/72 ・・consisting of frame and panels, {e.g. of raised panel type (E06B 3/7001 to E06B 3/7015 and E06B 3/82 take precedence)}

E06B 3/721 ・・・{with panels on one lateral side of the frame only}

E06B 3/723 ・・・{at least one side of the frame consisting solely of a bent panel edge}

E06B 3/725 ・・・{with separate hollow frames, e.g. foam-filled}

E06B 3/726 ・・・・{of metal}

E06B 3/728 ・・・・・{of sheet metal}

E06B 3/74 ・・・with wooden panels {or frame (E06B 3/721, E06B 3/725 and E06B 3/76 take precedence)}

E06B 3/76 ・・・with metal panels {(E06B 3/721 to E06B 3/725 take precedence)}

E06B 3/78 ・・・with panels of plastics {(E06B 3/721 to E06B 3/725 take precedence)}

E06B 3/80 ・・flexible {(upwardly folding flexible screens E06B 9/262)}

E06B 3/805 ・・・{folding sideways (doors of the bellows type E06B 3/94)}

E06B 3/82 ・・Flush doors, i.e. with completely flat surface (E06B 3/02, {E06B 3/7003 and E06B 3/7015} take precedence)

E06B 3/822 ・・・{with an internal foursided frame}

E06B 3/825 ・・・・{with a wooden frame}

E06B 3/827 ・・・{of metal without an internal frame, e.g. with exterior panels substantially of metal}

E06B 3/84 ・・・of plywood {or other wooden panels without an internal frame, e.g. with exterior panels substantially of wood}

E06B 3/86 ・・・of plastics {without an internal frame, e.g. with exterior panels substantially of plastics}

E06B 3/88 ・・Edge-protecting devices for door leaves ({astragals for double doors E06B 3/365}; finger guards for doors or windows E06B 7/36)

E06B 3/90 ・Revolving doors; Cages or housings therefor (turnstiles E06B 11/08)

E06B 3/903 ・・{consisting of arcuate wings revolving around a parallel axis situated outside the wing, e.g. a cylindrical wing revolving around its axis (E06B 3/906 takes precedence)}

E06B 3/906 ・・{combining radially extending wings and separately movable arcuate wings}

E06B 3/92 ・Doors or windows extensible when set in position (foldable wings E06B 3/48; sliding wings for windows E06B 3/42; wall-closing devices which may be rolled up, e.g. shutters, E06B 9/089){(E06B 3/01 takes precedence)}

E06B 3/921 ・・{with several parts mounted telescopically inside each other}

E06B 3/922 ・・{with several wings opening horizontally towards the same side of the opening and each closing a separate part of the opening (E06B 3/921 and E06B 3/928 take precedence)}

E06B 3/924 ・・・{positioned in one plane when closed}

E06B 3/925 ・・{with several wings opening vertically towards the same side of the opening and each closing a separate part of the opening (E06B 3/921 and E06B 3/928 take precedence)}

E06B 3/927 ・・・{positioned in one plane when closed}

E06B 3/928 ・・{Doors or windows of the lazy tongs type}

E06B 3/94 ・・Doors of the bellows type

E06B 3/96 ・Corner joints or edge joints for windows, doors, or the like frames or wings {(E06B 3/663 takes precedence)}

E06B 3/9604 ・・{Welded or soldered joints (E06B 3/988, E06B 3/99 take precedence; welding of plastics B29C 65/00, soldering or welding of metals B23K)}

E06B 3/9608 ・・・{Mitre joints}

E06B 3/9612 ・・{by filling in situ the hollow ends of the abutted frame members with a hardenable substance}

E06B 3/9616 ・・{characterised by the sealing at the junction of the frame members (E06B 3/9632 takes precedence)}

E06B 3/962 ・・・{Mitre joints}

E06B 3/9624 ・・{with means specially adapted for aligning the frontal surfaces of adjacent frame member ends}

E06B 3/9628 ・・{Mitre joints concealed to look like butt joints}

E06B 3/9632 ・・{between a jamb and the threshold or sill of window or door frames}

E06B 3/9636 ・・{for frame members having longitudinal screw receiving channels}

E06B 3/964 ・・using separate connection pieces, e.g. T-connection pieces (E06B 3/9604 to E06B 3/9636 and E06B 3/984 to E06B 3/99 take precedence)

E06B 3/9641 ・・・{part of which remains visible (E06B 3/9647 takes precedence)}

E06B 3/9642 ・・・{Butt type joints with at least one frame member cut off square; T-shape joints (E06B 3/9641, E06B 3/9644, E06B 3/9647, E06B 3/9649, E06B 3/968 take precedence)}

E06B 3/9643 ・・・・{for frame members being in one line with each other}

E06B 3/9644 ・・・{L-shaped corner pieces having two articulated or flexible joined legs; Corner joints with variable angle}

E06B 3/9645 ・・・{Mitre joints (E06B 3/9641, E06B 3/9644, E06B 3/9647. E06B 3/9649, E06B 3/968 take precedence)}

E06B 3/9646 ・・・・{using two similar connecting pieces each connected with one or the frame members and drawn together at the joint}

E06B 3/9647 ・・・{the connecting piece being part of or otherwise linked to the window or door fittings}

E06B 3/9648 ・・・・{Mitre joints}

E06B 3/9649 ・・・{Tie rods spanning the whole width or height fo the frame; Straps encircling the frame}

E06B 3/968 ・・・characterised by the way the connecting pieces are fixed in or on the frame members

E06B 3/9681 ・・・・{by press fit or adhesion}

E06B 3/9682 ・・・・・{Mitre joints}

E06B 3/9684 ・・・・{by hooking protrusions on the connecting piece in openings of the frame member, e.g. by snap-locking (E06B 3/972, E06B 3/976, E06B 3/98 take precedence)}

E06B 3/9685 ・・・・・{Mitre joints}

E06B 3/9687 ・・・・{with screws blocking the connecting piece inside or on the frame member (E06B 3/972, E06B 3/976 take precedence)}

E06B 3/9688 ・・・・・{Mitre joints}

E06B 3/972 ・・・・by increasing the cross-section of the connecting pieces, e.g. by expanding the connecting pieces with wedges (E06B 3/976 takes precedence)

E06B 3/9725 ・・・・・{Mitre joints}

E06B 3/976 ・・・・by deformation of the frame members {(making sheet metal frames for openings B21D 53/74)}

E06B 3/9765 ・・・・・{Mitre joints}

E06B 3/98 ・・・・the connecting pieces being specially adapted for drawing the frame members towards each other (E06B 3/9684, E06B 3/972, E06B 3/976 take precedence)

E06B 3/982 ・・・・・{Mitre joints}

E06B 3/984 ・・specially adapted for frame members of wood or other material worked in a similar way (E06B 3/99 takes precedence)

E06B 3/9845 ・・・{Mitre joints}

E06B 3/988 ・・specially adapted for sheet metal frame members with an open U-shaped cross-section

E06B 3/9885 ・・・{Mitre joints}

E06B 3/99 ・・for continuous frame members crossing each other with out interruption (window bars E06B 3/68)

E06B 5/00 Doors, windows, or like closures for special purposes {(insulated compound frames specially adapted for sliding doors or windows E06B 3/26347)}; Border constructions therefor

E06B 5/003 ・{Storm doors; Combination-screen-and-storm-doors}

E06B 5/006 ・{for furniture (E06B 3/00, E06B 9/10F take precedence)}

E06B 5/01 ・Trap-doors

E06B 5/02 ・for out-buildings or cellars; Other simple closures not designed to be close-fitting

E06B 5/025 ・・{Provisional closures, e.g. temporary security doors}

E06B 5/04 ・・with fixed wooden frames

E06B 5/06 ・・with fixed metal frames

E06B 5/08 ・・with fixed frames made of concrete, stone-like material or plastics

E06B 5/10 ・for protection against air-raid or other war-like action; for other protective purposes

E06B 5/103 ・・{safety foils therefor}

E06B 5/106 ・・{Frames for bullet-proof windows (transparent bullet-proof laminates F41H 5/0407)}

E06B 5/11 ・・against burglary

E06B 5/113 ・・・{Arrangements at the edges of the wings, e.g. with door guards to prevent the insertion of prying tools (protection of the locking region by preventing insertion of a tool E05B 17/2003; means to prevent forced opening by attack, tampering or jimmying of lock E05B 17/2084; anti-tamper devices arranged on or near the hinges E05D 11/0018)}

E06B 5/116 ・・・{Arrangements preventing the removal of glazing panels}

E06B 5/12 ・・against air pressure, explosion, or gas

E06B 5/125 ・・・{Closures for relieving excess pressure inside the building}

E06B 5/14 ・・・Gasproof doors or similar closures; Adaptation of fixed constructions therefor

E06B 5/16 ・・Fireproof doors or similar closures; Adaptations of fixed constructions therefor

E06B 5/161 ・・・{Profile members therefor}

E06B 5/162 ・・・{Fireproof doors having windows or other openings, e.g. for permitting ventilation or escape}

E06B 5/164 ・・・{Sealing arrangements between the door or window and its frame, e.g. intumescent seals specially adapted therefor}

E06B 5/165 ・・・{Fireproof windows (layered glass panes with expansion layers for fire protection B32B 17/10311)}

E06B 5/167 ・・・{Devices blocking doors or windows inside its frame in case of fire}

E06B 5/168 ・・・{Shape of edges of wing and/or its frame specially adapted therefor}

E06B 5/18 ・・against harmful radiation (against heat E06B 5/16)

E06B 5/20 ・for insulation against noise

E06B 5/205 ・・{windows therefor}

E06B 7/00 Special arrangements or measures in connection with doors or windows ({arrangements against burglary at the edges of the wings E06B 5/11B}; screening or similar protective devices E06B 9/00)

E06B 7/02 ・for providing ventilation, e.g. through double windows; Arrangement of ventilation roses (airflow control members per se F24F 13/08)

E06B 7/03 ・・Ventilating devices for inserting under upwardly-sliding windows (rain or draught deflectors E06B 7/26)

E06B 7/04 ・・with ventilation wings (E06B 7/08 takes precedence)

E06B 7/06 ・・・with one ventilation wing only

E06B 7/08 ・・Louvre doors, windows or grilles {(shutters E06B 9/04; louvre awnings E04F 10/08 to E06F 10/10)}

E06B 7/082 ・・・with rigid or slidable lamellae

E06B 7/084 ・・・with rotatable lamellae

E06B 7/086 ・・・・interconnected for concurrent movement

E06B 7/088 ・・・・・with facing protective grille or safety guard

E06B 7/09 ・・・・・mounted in movable wing, e.g. door

E06B 7/092 ・・・・・operable in two or more distinct sets

E06B 7/094 ・・・・・operable in sequence; characterised by additional independent movement

E06B 7/096 ・・・・・operated or interconnected by gearing (wing operators with gearing in general E05F 11/00)

E06B 7/098 ・・・・・with weather seal

E06B 7/10 ・・by special construction of the frame members

E06B 7/12 ・Measures preventing the formation of condensed water (double glazing E06B 3/24 to E06B 3/28{and E06B 3/677}; heating arrangements specially adapted for transparent or reflecting areas H05B 3/84)

E06B 7/14 ・Measures for draining-off condensed water or water leaking-in {frame members for draining off condensation water, throats at the bottom of a sash}

E06B 7/16 ・Sealing arrangements on wings or parts co-operating with the wings ({specially adapted for fireproof or similar closures E06B 5/164;}E06B 7/098 takes precedence; {fixed sealing joints E04B 1/68; Devices for fitting sealing strips E04F 21/00})

E06B 7/18 ・・by means of movable edgings, e.g. draught sealings additionally used for bolting, {e.g. by spring force or with operating lever}

E06B 7/20 ・・・automatically withdrawn when the wing is opened, {e.g. by means of magnetic attraction, a pin or an inclined surface, especially for sills}

E06B 7/205 ・・・・with sealing strip mounted on sill

E06B 7/21 ・・・・with sealing strip movable in plane of wing

E06B 7/215 ・・・・with sealing strip being moved to a retracted position by elastic means, e.g. springs

E06B 7/22 ・・by means of elastic edgings, e.g. elastic rubber tubes; by means of resilient edgings, e.g. felt or plush strips, resilient metal strips (E06B 7/18 takes precedence)

E06B 7/23 ・・・Plastic, sponge rubber, or like strips or tubes

E06B 7/2301 ・・・・{without an integrally formed part for fixing the edging}

E06B 7/2303 ・・・・・{hollow}

E06B 7/2305 ・・・・{with an integrally formed part for fixing the edging (E06B 7/2316 takes precedence)}

E06B 7/2307 ・・・・・{with a single sealing-line or -plane between the wing and the part co-operating with the wing}

E06B 7/2309 ・・・・・・{with a hollow sealing part}

E06B 7/231 ・・・・・・{with a solid sealing part}

E06B 7/2312 ・・・・・{with two or more sealing-lines or -planes between the wing and part co-operating with the wing}

E06B 7/2314 ・・・・{characterised by the material}

E06B 7/2316 ・・・・{used as a seal between the floor and the wing}

E06B 7/2318 ・・・・{by applying over- or under-pressure, e.g. inflatable (gasproof doors or windows E06B 5/12; for vehicles B60J 10/00B)}

E06B 7/232 ・・・Resilient strips of hard material, e.g. metal

E06B 7/24 ・・without separate sealing members, e.g. with labyrinth

E06B 7/26 ・Rain or draught deflectors, e.g. under sliding wings {also protection against light for doors}

E06B 7/28 ・Other arrangements on doors or windows, e.g. door-plates, windows adapted to carry plants, hooks for window cleaners {edge protecting devices for door leaves E06B 3/88; special glazing; emergency glazing; double glazing E06B 3/66}

E06B 7/285 ・・{Finger plates (escutcheons E05B 15/02)}

E06B 7/30 ・・Peep-holes; Devices for speaking through; Doors having windows

E06B 7/32 ・・Serving doors; Passing-through doors; {Pet-doors}

E06B 7/34 ・・Doors containing cupboards (cabinet constructions per se A47B)

E06B 7/36 ・・Finger guards {or other measures preventing harmful access between the door and the door frame (safety devices for doors in railway cars B21D 19/02C; for lift doors B66B 13/26; detection of obstructions E05F 15/0004)}

E06B 7/362 ・・・{the gap between the door and the door frame at the hinge side being constructed in a way to remain too small or too wide to cause injury}

E06B 7/367 ・・・{by covering the gap between the door and the door frame at the hinge side}

E06B 9/00 Screening or protective devices for {wall or similar} openings, with or without operating or securing mechanisms; Closures of similar construction (E06B 5/10 takes precedence; wings for doors or windows, connected at their edges, E06B 3/48; additional indoor equipment of doors or windows, not forming part of the proper finishing work of a building, e.g. curtains, A47H; gratings as building elements E04C 2/24; fastening means E05; operating-mechanisms for wings in general E05F)

E06B 9/01 ・Grilles fixed to walls, doors, or windows; Grilles moving with doors or windows; Walls formed as grilles, e.g. claustra {(emergency release of window grilles E05B 65/1033; security bars for wings E05C 19/003)}

E06B 9/02 ・Shutters, movable grilles, or other safety closing devices, e.g. against burglary (louvre windows or grilles E06B 7/08; lamellar blinds E06B 9/26)

E06B 9/04 ・・of wing type, e.g. revolving or sliding {trap doors; louvre doors or windows E06B 7/08}

E06B 9/06 ・・collapsible or foldable, e.g. of the bellows or lazy-tongs type (bellows-type doors E06B 3/94; roll-type grilles E06B 9/18)

E06B 9/0607 ・・・{comprising a plurality of similar rigid closing elements movable to a storage position}

E06B 9/0615 ・・・・{characterised by the closing elements}

E06B 9/0623 ・・・・・{Grilles}

E06B 9/063 ・・・・・{Bars or rods perpendicular to the closing direction}

E06B 9/0638 ・・・・・{Slats or panels}

E06B 9/0646 ・・・・{characterised by the relative arrangement of the closing elements in the stored position}

E06B 9/0653 ・・・・・{stored side by side in the closing plane}

E06B 9/0661 ・・・・・・{Lazy tongue, pantograph or scissor-like systems in the plane of the opening}

E06B 9/0669 ・・・・・{stored in a zig-zag arrangement}

E06B 9/0676 ・・・・・{stored in a stacked configuration}

E06B 9/0692 ・・・{comprising flexible sheets as closing screen}

E06B 9/08 ・・Roll-type closures (roller blinds E06B 9/40; operating, guiding or securing devices or arrangements for roll-type closures E06B 9/56; usable only as awnings E04F 10/06)

E06B 9/11 ・・・Roller shutters

E06B 9/115 ・・・・{specially adapted for furniture}

E06B 9/13 ・・・・with closing members of one piece, e.g. of corrugated sheet metal

E06B 9/15 ・・・・with closing members formed of slats or the like

E06B 9/165 ・・・・・with slats disappearing in each other; with slats the distance between which can be altered

E06B 9/17 ・・・・Parts or details of roller shutters, e.g. suspension devices, shutter boxes, wicket doors, ventilation openings

E06B 9/17007 ・・・・・{Shutter boxes; Details or component parts thereof}

E06B 9/17015 ・・・・・・{made of at most two pieces; Front opening details}

E06B 9/17023 ・・・・・・{made of more than two pieces}

E06B 9/1703 ・・・・・・{Fixing of the box; External plastering of the box}

E06B 9/17046 ・・・・・{Bottom bars}

E06B 9/17061 ・・・・・{Connection of the box to the guides}

E06B 9/17076 ・・・・・{Sealing or antirattling arrangements}

E06B 9/171 ・・・・・Rollers therefor; Fastening roller shutters to rollers

E06B 9/172 ・・・・・・by clamping bars

E06B 9/173 ・・・・・・by clasps or buttons

E06B 9/174 ・・・・・Bearings specially adapted therefor

E06B 9/18 ・・・Roll-type grilles

E06B 9/24 ・Screens or other constructions affording protection against light, especially against sunshine; Similar screens for privacy or appearance; {Slat blinds}(operating, guiding or securing devices or arrangements for roll-type closures E06B 9/56; free-hanging flexible screens A47H 23/00)

E06B 9/26 ・・Lamellar or like blinds, e.g. venetian blinds{(for vehicles B60J 1/2088)}

E06B 9/262 ・・・with flexibly-interconnected horizontal or vertical strips; Concertina blinds, {i.e. upwardly folding flexible screens}

E06B 9/264 ・・・Combinations of lamellar blinds with roller shutters, screen windows, windows, or double panes; Lamellar blinds with special devices

E06B 9/266 ・・・Devices or accessories for making or mounting lamellar blinds or parts thereof {(cleaning of lamellar blinds A47L 4/00; joining plastics plates for making venetian blinds B29C 66/437)}

E06B 9/28 ・・・with horizontal lamellae, e.g. non-liftable (louvre windows or gratings E06B 7/08)

E06B 9/30 ・・・・liftable

E06B 9/302 ・・・・・without ladder-tape, e.g. with lazy-tongs, with screw spindle

E06B 9/303 ・・・・・with ladder-tape

E06B 9/304 ・・・・・・with tilting bar and separate raising shaft

E06B 9/305 ・・・・・・with tilting bar and raising cords guided along fixed bar

E06B 9/306 ・・・・・・with tilting bar along which the raising cords are guided

E06B 9/307 ・・・・・・Details of tilting bars and their operation

E06B 9/308 ・・・・・・with coaxial tilting bar and raising shaft

E06B 9/32 ・・・・・Operating, guiding, or securing devices therefor (operation of tilting bars E06B 9/307)

E06B 9/322 ・・・・・・Details of operating devices, e.g. pulleys, brakes, spring drums, drives ({operating devices E06B 9/68}; devices of general interest specially adapted or mounted for storing and repeatedly paying-out and re-storing lengths of material B65H 75/34)

E06B 9/323 ・・・・・・Structure or support of upper box

E06B 9/324 ・・・・・・Cord-locks {cord-locks for curtains A47H 3/00}

E06B 9/325 ・・・・・・Immobilising devices preventing raising

E06B 9/326 ・・・・・・Details of cords, e.g. buckles, drawing knobs

E06B 9/327 ・・・・・・Guides for raisable lamellar blinds with horizontal lamellae

E06B 9/34 ・・・・roller-type; {Roller shutters with adjustable lamellae}

E06B 9/36 ・・・with vertical lamellae; {Supporting rails therefor}

E06B 9/361 ・・・・{Transmissions located at the end of the supporting rail}

E06B 9/362 ・・・・{Travellers; Lamellae suspension stems}

E06B 9/364 ・・・・・{Operating mechanisms therein}

E06B 9/365 ・・・・・{Distance pieces therefor}

E06B 9/367 ・・・・{Lamellae suspensions (E06B 9/362 takes precedence); Bottom weights; Bottom guides}

E06B 9/368 ・・・・{Driving means other than pulling cords}

E06B 9/38 ・・・Other details

E06B 9/382 ・・・・Details of ladder-tapes or ladder chains, e.g. buckles for local shortening of tapes

E06B 9/384 ・・・・Details of interconnection or interaction of tapes and lamellae

E06B 9/386 ・・・・Details of lamellae

E06B 9/388 ・・・・Details of bottom or upper slats or their attachment

E06B 9/40 ・・Roller blinds (usable only as awnings E04F 10/06)

E06B 9/42 ・・・Parts or details of roller blinds, e.g. suspension devices, blind boxes (brackets or adjustable mountings for roller blinds and drawable curtains A47H 1/13)

E06B 9/44 ・・・・Rollers therefor; Fastening roller blinds to rollers

E06B 9/46 ・・・・・by clamping bars

E06B 9/48 ・・・・・by clasps or buttons

E06B 9/50 ・・・・Bearings specially adapted therefor

E06B 9/52 ・Devices affording protection against insects, e.g. fly screens; Mesh windows for other purposes {screens A47G 5/00}

E06B 9/521 ・・{Frameless fly screens; Tensioning means therefor (E06B 9/54 takes precedence)}

E06B 9/522 ・・{Dimensionally adjustable fly screens(E06B 9/54 andE06B 9/521 take precedence)}

E06B 9/54 ・・Roller fly screens (operating, guiding or securing devices therefor E06B 9/56)

E06B 9/56 ・Operating, guiding or securing devices or arrangements for roll-type closures; Spring drums; Tape drums; Counterweighting arrangements therefor (devices of general interest specially adapted or mounted for storing and repeatedly paying-out and re-storing lengths of material B65H 75/34)

E06B 9/58 ・・Guiding devices

E06B 9/581 ・・・{Means to prevent or induce disengagement of shutter from side rails}

E06B 9/582 ・・・{Means to increase gliss, light, sound or thermal insulation}

E06B 9/60 ・・Spring drums operated only by closure members

E06B 9/62 ・・Counterweighting arrangements (E06B 9/60 takes precedence)

E06B 9/64 ・・with lowerable roller

E06B 9/66 ・・with a roller situated at the bottom

E06B 9/68 ・・Operating devices or mechanisms, e.g. with electric drive

E06B 9/70 ・・・comprising an electric motor positioned outside the roller

E06B 9/72 ・・・comprising an electric motor positioned inside the roller

E06B 9/74 ・・・adapted for selective electrical or manual operation

E06B 9/76 ・・・using crank handles

E06B 9/78 ・・for direct manual operation, e.g. by tassels, by handles

E06B 9/80 ・・Safety measures against dropping or unauthorised opening; Braking or immobilising devices; Devices for limiting unrolling (securing devices or arrangements for direct manual operation E06B 9/78)

E06B 9/82 ・・・automatic

E06B 9/84 ・・・・against dropping

E06B 9/86 ・・・・against unauthorised opening

E06B 9/88 ・・・・for limiting unrolling

E06B 9/90 ・・・・for immobilising the closure member in various chosen positions

E06B 9/92 ・・Means allowing the closures to be shifted out of the plane of the opening

E06B 11/00 Means for allowing passage through fences, barriers or the like, e.g. stiles (general features of doors E06B 1/00 to E06B 9/00; {cattle grids A01K 3/002; features peculiar to electrified wire fencing A01K 3/005})

E06B 11/02 ・Gates; Doors

E06B 11/021 ・・{Wire gates, e.g. traction gates; Fastenings therefor (insulators, poles, handles, or the like, in electric fences H01B 17/145)}

E06B 11/022 ・・{characterised by the manner of movement}

E06B 11/023 ・・・{where the gate opens within the plane of the gate}

E06B 11/025 ・・・・{vertically}

E06B 11/026 ・・・・{horizontally}

E06B 11/027 ・・・{where the gate rotates around a horizontal axis parallel to the plane of the gate}

E06B 11/028 ・・{with posts connected underground}

E06B 11/04 ・・characterised by the kind of suspension (suspensions per se E05D)

E06B 11/045 ・・・{exclusively for horizontally sliding gates}

E06B 11/08 ・Turnstiles; {Gates for control of entry or exit of persons, e.g. in supermarkets}(control gates on vehiclesB60N 5/00; [bank protection devicesE05G 5/00]; with registering meansG07C 9/02;{coin-freed facilities for turnstilesG07F 17/14})

E06B 11/085 ・・{non-rotary or with a limited angle of rotation, e.g. 90°}

E06B 2001/00 Border constructions of openings in walls, floors, or ceilings; Frames to be rigidly mounted in such openings (E06B 5/00 takes precedence; features relating also to inner frames or wing frames, features relating solely to the mounting of inner frames E06B 3/00; corner joints or edge joints E06B 3/96)

E06B 2001/62 ・Tightening or covering joints between the border of openings and the frame {or between contiguous frames}(E06B 1/34 takes precedence)

E06B 2001/622 ・・especially adapted for door frames; Joint covering devices where the wall surface is parlallel to the adjacent door or window frame part

E06B 2001/624 ・・with parts to be embedded in the stucco layer or otherwise linked to this layer

E06B 2001/626 ・・comprising expanding foam strips

E06B 2001/628 ・・Separate flexible joint covering strips; Flashings

E06B 2001/70 ・Sills; Thresholds

E06B 2001/707 ・・Thresholds with special provision for insulation

E06B 2003/00 Window sashes, door leaves, or like elements for closing {wall or like} openings; Layout of fixed or moving closures, e.g. windows {in wall or like openings}; Features of rigidly-mounted outer frames relating to the mounting of wing frames (E06B 5/00 takes precedence; shutters or the like E06B 9/00; glass panes C03)

E06B 2003/04 ・Wing frames not characterised by the manner of movement (features relating to the manner of movement E06B 3/32)

E06B 2003/06 ・・Single frames

E06B 2003/08 ・・・Constructions depending on the use of specified materials (E06B 3/24 takes precedence)

E06B 2003/12 ・・・・of metal

E06B 2003/14 ・・・・・of special cross-section {not used, see subgroup and E06B 3/12}

E06B 2003/16 ・・・・・・Hollow frames {of special construction, e.g. made of folded sheet metal or of two or more section parts connected together}

E06B 2003/166 ・・・・・・・with a filled cavity

E06B 2003/20 ・・・・of plastics

E06B 2003/22 ・・・・・Hollow frames {(E06B 3/205 takes precedence)}

E06B 2003/221 ・・・・・・{with the frame member having local reinforcements in some parts of its cross-section or with a filled cavity}

E06B 2003/222 ・・・・・・・{with internal prefabricated reinforcing section members inserted after manufacturing of the hollow frame}

E06B 2003/224 ・・・・・・・・with reinforcing plastic section members

E06B 2003/225 ・・・・・・・・Means for stabilising the insert

E06B 2003/226 ・・・・・・・・・by adhesives or filling up the remainder of the cavity, e.g. together with foam

E06B 2003/227 ・・・・・・・・with reinforcing wooden section members

E06B 2003/228 ・・・・・・・with separate reinforcements situated outside the cavity or in the walls

E06B 2003/26 ・・Compound frames, i.e. one frame within or behind another (E06B 3/28 takes precedence; arrangements of movable frames E06B 3/32)

E06B 2003/2605 ・・・{with frames permanently mounted behind or within each other, each provided with a pane or screen}

E06B 2003/261 ・・・・Frames made of wood

E06B 2003/2615 ・・・・Frames made of metal

E06B 2003/262 ・・・・Frames made of plastic material

E06B 2003/2625 ・・・・with different frames made from different materials

E06B 2003/263 ・・Frames with special provision for insulation

E06B 2003/26301 ・・・{with prefabricated insulating strips between two metal section members (with two metal frame members having interpenetrating or overlapping parts when mounted E06B 3/26336; combined with insulating elements formed in situ E06B 3/2675)}

E06B 2003/26305 ・・・・{Connection details (deformation of portions of the metal frame members E06B 3/273; expansion of the extremities of the insulating elements E06B 3/277)}

E06B 2003/26309 ・・・・・using glue

E06B 2003/2631 ・・・・・Screw or pin connections

E06B 2003/26312 ・・・・・Snap connections

E06B 2003/26314 ・・・・・Provisions for reducing the shift between the strips and the metal section members

E06B 2003/26316 ・・・・・Disconnectable connections or permitting shifting between the sections

E06B 2003/26318 ・・・・・Connecting by rotating the metal section or the strip around its longitudinal axis

E06B 2003/2632 ・・・{with arrangements reducing the heat transmission, other than an interruption in a metal section}

E06B 2003/26321 ・・・・with additional prefab insulating materials in the hollow space

E06B 2003/26323 ・・・・with coatings reducing the radiation

E06B 2003/26325 ・・・・the convection or radiation in a hollow space being reduced, e.g. by subdividing the hollow space

E06B 2003/26327 ・・・・・with separate thin walled inserts

E06B 2003/26329 ・・・・・the insulating strips between the metal sections being interconnected

E06B 2003/2633 ・・・・・the insulating strips between the metal sections having ribs extending into the hollow space

E06B 2003/26332 ・・・・Arrangements reducing the heat transfer in the glazing rabbet or the space between the wing and the casing frame

E06B 2003/26334 ・・・・Contact reducing arrangements between the insulating strips and the metal sections

E06B 2003/26349 ・・・Details of insulating strips

E06B 2003/2635 ・・・・Specific form characteristics

E06B 2003/26352 ・・・・・hollow

E06B 2003/26354 ・・・・・・filled

E06B 2003/26356 ・・・・・・Honeycomb

E06B 2003/26358 ・・・・・stepped or undulated

E06B 2003/26359 ・・・・・making flush mounting with neighbouring metal section members possible

E06B 2003/26361 ・・・・・Openings, incisions or indents

E06B 2003/26363 ・・・・・Screw channels

E06B 2003/26365 ・・・・・Composed of several similar parts positioned one after the other

E06B 2003/26367 ・・・・making flush mounting with neighbouring metal section members possible

E06B 2003/26369 ・・・・Specific material characteristics

E06B 2003/2637 ・・・・・reinforced

E06B 2003/26372 ・・・・・with coatings

E06B 2003/26374 ・・・・・with parts of differing nature

E06B 2003/26376 ・・・・・Non-plastic materials, e.g. wood, metal

E06B 2003/26378 ・・・・・comprising foam

E06B 2003/26379 ・・・・Specific characteristics concerning the disposition between the metal section members

E06B 2003/26381 ・・・・・disposed obliquely

E06B 2003/26383 ・・・・・with two similar parallel strips, one shifted to one side

E06B 2003/26385 ・・・・・with strips disposed perpendicular to each other

E06B 2003/26387 ・・・・Performing extra functions

E06B 2003/26389 ・・・・・Holding sealing strips or forming sealing abutments

E06B 2003/2639 ・・・・・Provisions for fittings, e.g. locks or hinges

E06B 2003/26392 ・・・Glazing bars

E06B 2003/26394 ・・・Strenghtening arrangements in case of fire

E06B 2003/26396 ・・・specially adapted for sheet metal frames

E06B 2003/26398 ・・・with two metal sections clamping a pane

E06B 2003/32 ・Arrangements of wings characterised by the manner of movement; Arrangements of movable wings in openings; Features of wings or frames relating solely to the manner of movement of the wing {fittings or supporting means, separable from the frame, for guiding or controlling the movement of wings, arrangements of wings characterised by particular forms of such means E05D}

E06B 2003/34 ・・with only one kind of movement (E06B 3/48 takes precedence)

E06B 2003/343 ・・・with at least two axes of rotation without additional frame within the wing

E06B 2003/345 ・・・with additional rotating frame within the wing

E06B 2003/346 ・・・・where the additional frame rotates around a vertical axis

E06B 2003/348 ・・・・where the additional frame rotates around a horizontal axis

E06B 2003/40 ・・・with a vertical or horizontal axis of rotation not at one side of the opening, e.g. turnover wings

E06B 2003/403 ・・・・where the axis of rotation is horizontal

E06B 2003/406 ・・・・where the axis of rotation is vertical

E06B 2003/42 ・・・Sliding wings; Details of frames with respect to guiding {(E06B 3/26347 and E06B 3/92 take precedence)}

E06B 2003/44 ・・・・Vertically-sliding wings

E06B 2003/4438 ・・・・・characterised by the material used for the frames

E06B 2003/4446 ・・・・・・Wood

E06B 2003/4453 ・・・・・・Metal

E06B 2003/4461 ・・・・・・Plastics

E06B 2003/4469 ・・・・・・with at least two frames made from different materials

E06B 2003/4476 ・・・・・Coverings, e.g. for protecting against weather or for decorative purposes

E06B 2003/4484 ・・・・・Special provisions for mounting or dismounting sashes

E06B 2003/4492 ・・・・・provided with screens

E06B 2003/54 ・Fixing of glass panes or like plates

E06B 2003/5454 ・・{inside U-shaped section members}

E06B 2003/5463 ・・・in a preassembled frame, the pane being consecutively introduced obliquely, rotated and shifted

E06B 2003/5472 ・・・in an at least partly preassembled frame by introducing it through a slot in one of the frame members or inserting the pane before completing the frame

E06B 2003/58 ・・by means of borders, cleats, or the like ({E06B 3/30}, E06B 3/64 take precedence)

E06B 2003/62 ・・・of rubber-like elastic cleats

E06B 2003/6208 ・・・・with adjustable dimensions

E06B 2003/6211 ・・・・・with tear away strips

E06B 2003/6214 ・・・・specially adapted for glazing bars

E06B 2003/6217 ・・・・with specific fixing means

E06B 2003/622 ・・・・・using nails or the like

E06B 2003/6223 ・・・・・with protruding parts anchored in grooves

E06B 2003/6226 ・・・・・with locking strips

E06B 2003/6229 ・・・・・with grooves anchoring the cleat on a rim

E06B 2003/6232 ・・・・・using glue

E06B 2003/6235 ・・・・・moulded on the pane

E06B 2003/6238 ・・・・having extra functions

E06B 2003/6241 ・・・・・with drainage means

E06B 2003/6244 ・・・・・with extra parts sealing against the bottom of the glazing rebate or against the edge of the pane

E06B 2003/6247 ・・・・・with extra parts sealing against the fixed or another window frame

E06B 2003/625 ・・・・Specific form characteristics

E06B 2003/6252 ・・・・・wedge-shaped

E06B 2003/6255 ・・・・・H-shaped

E06B 2003/6258 ・・・・・U-shaped

E06B 2003/6261 ・・・・・S-shaped

E06B 2003/6264 ・・・・・hollow

E06B 2003/6267 ・・・・・consisting of several separate parts

E06B 2003/627 ・・・・with specific characteristics concerning the material

E06B 2003/6273 ・・・・・reinforced, e.g. against elongation

E06B 2003/6276 ・・・・・with parts of differing nature, e.g. hardness

E06B 2003/6279 ・・・・・with coverings or embellisher strips

E06B 2003/6282 ・・・・・of cellular nature

E06B 2003/6285 ・・・・・with provisions for receiving putty or pasty adhesives

E06B 2003/6288 ・・・・・with fire resisting properties

E06B 2003/6291 ・・・・Corner arrangements

E06B 2003/6294 ・・・・・using separate corner members

E06B 2003/6297 ・・・・for glazing panels of special shape, e.g. with undulating or U-shaped cross-section

E06B 2003/66 ・Units comprising two or more parallel glass or like panes permanently secured together {(reforming and uniting glass sheets by fusing C03B 23/00; joining glass to glass or to other materials C03C 27/00; laminated glass B32B 17/10)}

E06B 2003/663 ・・Element for spacing panes

E06B 2003/66309 ・・・{Section members positioned at the edges of the glazing unit}

E06B 2003/66333 ・・・・{of unusual substances, e.g. wood or other fibrous materials, glass or other transparent materials}

E06B 2003/66338 ・・・・・of glass

E06B 2003/6638 ・・・・with coatings

E06B 2003/66385 ・・・・with special shapes

E06B 2003/6639 ・・・・sinuous

E06B 2003/66395 ・・・・U-shape

E06B 2003/673 ・・Assembling the units (E06B 3/677 takes precedence; {making hollow glass sheets or bricks C03B 23/24})

E06B 2003/67365 ・・・{Transporting or handling panes, spacer frames or units during assembly (E06B 3/67304 to E06B 3/67339 take precedence)}

E06B 2003/67378 ・・・・Apparatus travelling around the periphery of the pane or the unit

E06B 2003/67395 ・・・Non-planar units or of curvilinear outline, e.g. for vehicles

E06B 2003/70 ・Door leaves (wing frames E06B 3/04)

E06B 2003/7011 ・・with easily replaceable or interchangeable panels

E06B 2003/7013 ・・・put in place through a slot in the frame

E06B 2003/7015 ・・{characterised by the filling between two external panels (fireproof doors E06B 5/16; noise insulating doors E06B 5/20)}

E06B 2003/7019 ・・・of corrugated type

E06B 2003/7021 ・・・consisting of wooden strips filling the whole door

E06B 2003/7023 ・・・of foam type

E06B 2003/7025 ・・・of cork; of wood or similar fibres

E06B 2003/7026 ・・・of granular type

E06B 2003/7028 ・・・of cementituous type, e.g. concrete

E06B 2003/703 ・・・containing a metallic layer

E06B 2003/7032 ・・・of non-vegetal fibrous material, e.g. glass or rock wool

E06B 2003/7034 ・・・・of asbestos

E06B 2003/7036 ・・・of plaster

E06B 2003/7038 ・・・made from a slurry

E06B 2003/704 ・・・of mineral material which is not further specified

E06B 2003/7042 ・・・with a fire retardant layer

E06B 2003/7044 ・・Garage doors

E06B 2003/7046 ・・with provisions for locks, hinges or other fittings

E06B 2003/7048 ・・with arcuate periphery; with openings having an arcuate periphery

E06B 2003/7049 ・・Specific panel characteristics

E06B 2003/7051 ・・・of layered construction involving different materials

E06B 2003/7053 ・・・corrugated

E06B 2003/7055 ・・Left-right hinged interchangeable door leaves

E06B 2003/7057 ・・with little passing through doors

E06B 2003/7059 ・・Specific frame characteristics

E06B 2003/7061 ・・・Wooden frames

E06B 2003/7063 ・・・・reinforced; in combination with other materials, e.g. foam, honeycomb

E06B 2003/7065 ・・・・Wood fibres

E06B 2003/7067 ・・・・of layered construction

E06B 2003/7069 ・・・・with cladding

E06B 2003/7071 ・・・・made of a plurality of separate blocks or strips

E06B 2003/7073 ・・・・with fire retardant measures in frame

E06B 2003/7074 ・・・Metal frames

E06B 2003/7076 ・・・・insulated

E06B 2003/7078 ・・・・with fire retardant measures in frame

E06B 2003/708 ・・・insulated

E06B 2003/7082 ・・・Plastic frames

E06B 2003/7084 ・・・・reinforced with metal or wood sections

E06B 2003/7086 ・・・One-piece frames, e.g. made out of a single panel by cutting out a middle portion, moulded frames

E06B 2003/7088 ・・・Two-piece frames made of a stile and an U-shaped part surrounding the panel

E06B 2003/709 ・・・Frame parts being attached to both sides of the panel which extends till the door edge

E06B 2003/7092 ・・・with frame members not directly or resiliently connected to each other

E06B 2003/7094 ・・with ventilated innerspace

E06B 2003/7096 ・・with possibilities to alter the extension of the door

E06B 2003/7098 ・・with bracing means crossing each other, e.g. diagonally disposed

E06B 2007/00 Special arrangements or measures in connection with doors or windows ({arrangements against burglary at the edges of the wings E06B 5/11B}; screening or similar protective devices E06B 9/00)

E06B 2007/02 ・for providing ventilation, e.g. through double windows; Arrangement of ventilation roses (airflow control members per se F24F 13/08)

E06B 2007/023 ・・Air flow induced by fan

E06B 2007/026 ・・with air flow between panes

E06B 2007/14 ・Measures for draining-off condensed water or water leaking-in {frame members for draining off condensation water, throats at the bottom of a sash}

E06B 2007/145 ・・for glass facade, e.g. curtain wall

E06B 2007/16 ・Sealing arrangements on wings or parts co-operating with the wings ({specially adapted for fireproof or similar closures E06B 5/164;}E06B 7/098 takes precedence; {fixed sealing joints E04B 1/68; Devices for fitting sealing strips E04F 21/00})

E06B 2007/18 ・・by means of movable edgings, e.g. draught sealings additionally used for bolting, {e.g. by spring force or with operating lever}

E06B 2007/20 ・・・automatically withdrawn when the wing is opened, {e.g. by means of magnetic attraction, a pin or an inclined surface, especially for sills}

E06B 2007/202 ・・・・Actuator connected to wing frame

E06B 2007/28 ・Other arrangements on doors or windows, e.g. door-plates, windows adapted to carry plants, hooks for window cleaners {edge protecting devices for door leaves E06B 3/88; special glazing; emergency glazing; double glazing E06B 3/66}

E06B 2007/30 ・・Peep-holes; Devices for speaking through; Doors having windows

E06B 2007/305 ・・・Microphone

E06B 2007/36 ・・Finger guards {or other measures preventing harmful access between the door and the door frame (safety devices for doors in railway cars B21D 19/02C; for lift doors B66B 13/26; detection of obstructions E05F 15/0004)}

E06B 2007/362 ・・・{the gap between the door and the door frame at the hinge side being constructed in a way to remain too small or too wide to cause injury}

E06B 2007/365 ・・・・Rounded shape at gap, e.g. cylindrical

E06B 2009/00 Screening or protective devices for {wall or similar} openings, with or without operating or securing mechanisms; Closures of similar construction (E06B 5/10 takes precedence; wings for doors or windows, connected at their edges, E06B 3/48; additional indoor equipment of doors or windows, not forming part of the proper finishing work of a building, e.g. curtains, A47H; gratings as building elements E04C 2/24; fastening means E05; operating-mechanisms for wings in general E05F)

E06B 2009/002 ・Safety guards or gates

E06B 2009/005 ・Storm panels; hurricane shutters

E06B 2009/007 ・Flood panels

E06B 2009/01 ・Grilles fixed to walls, doors, or windows; Grilles moving with doors or windows; Walls formed as grilles, e.g. claustra {(emergency release of window grilles E05B 65/1033; security bars for wings E05C 19/003)}

E06B 2009/015 ・・Mounting details

E06B 2009/02 ・Shutters, movable grilles, or other safety closing devices, e.g. against burglary (louvre windows or grilles E06B 7/08; lamellar blinds E06B 9/26)

E06B 2009/06 ・・collapsible or foldable, e.g. of the bellows or lazy-tongs type (bellows-type doors E06B 3/94; roll-type grilles E06B 9/18)

E06B 2009/0607 ・・・{comprising a plurality of similar rigid closing elements movable to a storage position}

E06B 2009/0646 ・・・・{characterised by the relative arrangement of the closing elements in the stored position}

E06B 2009/0684 ・・・・・stored in a spiral like arrangement

E06B 2009/08 ・・Roll-type closures (roller blinds E06B 9/40; operating, guiding or securing devices or arrangements for roll-type closures E06B 9/56; usable only as awnings E04F 10/06)

E06B 2009/11 ・・・Roller shutters

E06B 2009/13 ・・・・with closing members of one piece, e.g. of corrugated sheet metal

E06B 2009/135 ・・・・・Horizontal shutter reinforcements

E06B 2009/15 ・・・・with closing members formed of slats or the like

E06B 2009/1505 ・・・・・Slat details

E06B 2009/1511 ・・・・・・Coatings

E06B 2009/1516 ・・・・・・Means to increase resistance against bending

E06B 2009/1522 ・・・・・・Sealing joint between adjacent slats

E06B 2009/1527 ・・・・・・Transparent slats or transparent sections in slats

E06B 2009/1533 ・・・・・Slat connections

E06B 2009/1538 ・・・・・・Slats directly connected

E06B 2009/1544 ・・・・・・・Engaging section has curved articulation surfaces

E06B 2009/155 ・・・・・・Slats connected by separate elements

E06B 2009/1555 ・・・・・・・Flexible elements, e.g. tapes, strips, cords or chains

E06B 2009/1561 ・・・・・・・・Strips

E06B 2009/1566 ・・・・・・・Rigid elements, e.g. hinges, hooks or profiles

E06B 2009/1572 ・・・・・・Locking means to prevent slat disengagement

E06B 2009/1577 ・・・・・Slat end pieces used for guiding shutter

E06B 2009/1583 ・・・・・・inserted in slat cavity

E06B 2009/1588 ・・・・・・inserted in engaging section of adjacent slats

E06B 2009/1594 ・・・・・・attached to outer surface of slat

E06B 2009/17 ・・・・Parts or details of roller shutters, e.g. suspension devices, shutter boxes, wicket doors, ventilation openings

E06B 2009/17038 ・・・・・Shutter cleaning arrangements

E06B 2009/17053 ・・・・・Door in shutter screen; wicket door

E06B 2009/17069 ・・・・・Insulation

E06B 2009/17076 ・・・・・{Sealing or antirattling arrangements}

E06B 2009/17084 ・・・・・・closing outlet slot of shutter box

E06B 2009/17092 ・・・・・Manufacturing

E06B 2009/171 ・・・・・Rollers therefor; Fastening roller shutters to rollers

E06B 2009/1713 ・・・・・・Telescopic rollers

E06B 2009/1716 ・・・・・・Arrangements to improve rolling of the shutter on the roller

E06B 2009/174 ・・・・・Bearings specially adapted therefor

E06B 2009/1743 ・・・・・・allowing radial roller movement

E06B 2009/1746 ・・・・・・Axial connection of rollers

E06B 2009/24 ・Screens or other constructions affording protection against light, especially against sunshine; Similar screens for privacy or appearance; {Slat blinds}(operating, guiding or securing devices or arrangements for roll-type closures E06B 9/56; free-hanging flexible screens A47H 23/00)

E06B 2009/2405 ・・Areas of differing opacity for light transmission control

E06B 2009/2411 ・・Coloured fluid flow for light transmission control

E06B 2009/2417 ・・Light path control; means to control reflection

E06B 2009/2423 ・・Combinations of at least two screens

E06B 2009/2429 ・・・One vertical sheet and slats

E06B 2009/2435 ・・・Two vertical sheets and slats in-between

E06B 2009/2441 ・・・Screens joined one below the other

E06B 2009/2447 ・・・Parallel screens

E06B 2009/2452 ・・・・moving independently

E06B 2009/2458 ・・・・moving simultaneously

E06B 2009/2464 ・・featuring transparency control by applying voltage; e.g. LCD, electrochromic panels

E06B 2009/247 ・・Electrically powered illumination

E06B 2009/2476 ・・Solar cells

E06B 2009/2482 ・・Special shape

E06B 2009/2488 ・・・Curved perimeter

E06B 2009/2494 ・・・Trapezoidal or triangular

E06B 2009/26 ・・Lamellar or like blinds, e.g. venetian blinds{(for vehicles B60J 1/2088)}

E06B 2009/262 ・・・with flexibly-interconnected horizontal or vertical strips; Concertina blinds, {i.e. upwardly folding flexible screens}

E06B 2009/2622 ・・・・Gathered vertically; Roman, Austrian or festoon blinds

E06B 2009/2625 ・・・・Pleated screens, e.g. concertina- or accordion-like

E06B 2009/2627 ・・・・Cellular screens, e.g. box or honeycomb-like

E06B 2009/264 ・・・Combinations of lamellar blinds with roller shutters, screen windows, windows, or double panes; Lamellar blinds with special devices

E06B 2009/2643 ・・・・Screens between double windows

E06B 2009/2646 ・・・・・Magnetic screen operator

E06B 2009/28 ・・・with horizontal lamellae, e.g. non-liftable (louvre windows or gratings E06B 7/08)

E06B 2009/285 ・・・・Means for actuating a rod (being tilt rod or lift rod)

E06B 2009/30 ・・・・liftable

E06B 2009/32 ・・・・・Operating, guiding, or securing devices therefor (operation of tilting bars E06B 9/307)

E06B 2009/322 ・・・・・・Details of operating devices, e.g. pulleys, brakes, spring drums, drives ({operating devices E06B 9/68}; devices of general interest specially adapted or mounted for storing and repeatedly paying-out and re-storing lengths of material B65H 75/34)

E06B 2009/3222 ・・・・・・・Cordless, i.e. user interface without cords

E06B 2009/3225 ・・・・・・・Arrangements to aid the winding of cords rollers

E06B 2009/3227 ・・・・・・・・Axially moving rollers

E06B 2009/326 ・・・・・・Details of cords, e.g. buckles, drawing knobs

E06B 2009/3265 ・・・・・・・Emergency release to prevent strangulation or excessive load

E06B 2009/40 ・・Roller blinds (usable only as awnings E04F 10/06)

E06B 2009/402 ・・・adjustable without the use of tools or cutting instruments

E06B 2009/405 ・・・Two rollers

E06B 2009/407 ・・・Telescopic roller

E06B 2009/42 ・・・Parts or details of roller blinds, e.g. suspension devices, blind boxes (brackets or adjustable mountings for roller blinds and drawable curtains A47H 1/13)

E06B 2009/425 ・・・・Pull chain or cord attached to bottom edge of screen

E06B 2009/44 ・・・・Rollers therefor; Fastening roller blinds to rollers

E06B 2009/445 ・・・・・by adhesive

E06B 2009/52 ・Devices affording protection against insects, e.g. fly screens; Mesh windows for other purposes {screens A47G 5/00}

E06B 2009/524 ・・Mesh details

E06B 2009/525 ・・Patches for mesh repair or decoration

E06B 2009/527 ・・Mounting of screens to window or door

E06B 2009/528 ・・Screens extending between movable wing and fixed frame of window or door

E06B 2009/54 ・・Roller fly screens (operating, guiding or securing devices therefor E06B 9/56)

E06B 2009/543 ・・・Horizontally moving screens

E06B 2009/546 ・・・connected to end- or bottom-bar of roller shutter

E06B 2009/56 ・Operating, guiding or securing devices or arrangements for roll-type closures; Spring drums; Tape drums; Counterweighting arrangements therefor (devices of general interest specially adapted or mounted for storing and repeatedly paying-out and re-storing lengths of material B65H 75/34)

E06B 2009/58 ・・Guiding devices

E06B 2009/583 ・・・Cords or cables

E06B 2009/585 ・・・Emergency release to prevent damage of shutter or guiding device

E06B 2009/586 ・・・with heating to prevent frost or condensate

E06B 2009/587 ・・・Mounting of guiding devices to supporting structure

E06B 2009/588 ・・・Sealings for guides

E06B 2009/68 ・・Operating devices or mechanisms, e.g. with electric drive

E06B 2009/6809 ・・・Control

E06B 2009/6818 ・・・・using sensors

E06B 2009/6827 ・・・・・sensing light

E06B 2009/6836 ・・・・・sensing obstacle

E06B 2009/6845 ・・・・・sensing position

E06B 2009/6854 ・・・・・sensing torque

E06B 2009/6863 ・・・・・sensing wind speed

E06B 2009/6872 ・・・・using counters to determine shutter position

E06B 2009/6881 ・・・・・Mechanical counters

E06B 2009/689 ・・・・using end switches

E06B 2009/72 ・・・comprising an electric motor positioned inside the roller

E06B 2009/725 ・・・・with epicyclic or planetary gear train

E06B 2009/78 ・・for direct manual operation, e.g. by tassels, by handles

E06B 2009/785 ・・・by belts, straps, bands, tapes, cords, tassels

E06B 2009/80 ・・Safety measures against dropping or unauthorised opening; Braking or immobilising devices; Devices for limiting unrolling (securing devices or arrangements for direct manual operation E06B 9/78)

E06B 2009/801 ・・・Locking arrangements

E06B 2009/802 ・・・・located in or close to shutter box

E06B 2009/804 ・・・・acting directly on the shutter

E06B 2009/805 ・・・・located on or in the guides

E06B 2009/807 ・・・Brakes preventing fast screen movement

E06B 2009/808 ・・・・Fluid brakes

E06B 2009/82 ・・・automatic

E06B 2009/88 ・・・・for limiting unrolling

E06B 2009/885 ・・・・・Braking mechanism activated by the bottom bar

E06B 2009/90 ・・・・for immobilising the closure member in various chosen positions

E06B 2009/905 ・・・・・using wrap spring clutches