WebCPC CPC COOPERATIVE PATENT CLASSIFICATION

E05D　HINGES OR OTHER SUSPENSION DEVICES FOR DOORS, WINDOWS OR WINGS ({foldable tables A47B 3/00; hinged panels A47B 5/00; foldable chairs A47C 4/00; making hinges B21D 53/40, B21K 13/02; making holes for taking-up fittings B27F 5/12; for vehicle tailboards B60P 1/00D; for refuse receptacles B65F 1/1646}; pivotal connections in general F16C 11/00; mounting of stove or range doors F24C 15/023; for folding flat displays of portable computers G06F 1/16P2H])

E05D 1/00 Pinless hinges; Substitutes for hinges

E05D 1/02 ・made of one piece

E05D 1/04 ・with guide members shaped as circular arcs

E05D 1/06 ・consisting of two easily-separable parts

E05D 3/00 Hinges with pins {(E05D 7/08 takes precedence)}

E05D 3/02 ・with one pin

E05D 3/022 ・・{allowing an additional lateral movement, e.g. for sealing}

E05D 3/04 ・・engaging three or more parts, e.g. sleeves, movable relatively to one another for connecting two or more wings to another member

E05D 3/06 ・with two or more pins (E05D 7/08 takes precedence)

E05D 3/08 ・・for swing-doors, i.e. openable by pushing from either side

E05D 3/10 ・・with non-parallel pins

E05D 3/12 ・・with two parallel pins and one arm

E05D 3/122 ・・・{Gear hinges}

E05D 3/125 ・・・{specially adapted for vehicles}

E05D 3/127 ・・・・{for vehicle doors}

E05D 3/14 ・・with four parallel pins and two arms

E05D 3/142 ・・・{with at least one of the hinge parts having a cup-shaped fixing part, e.g. for attachment to cabinets or furniture (E05D 11/1021 takes precedence)}

E05D 3/145 ・・・{specially adapted for vehicles}

E05D 3/147 ・・・・{for vehicle doors}

E05D 3/16 ・・with seven parallel pins and four arms

E05D 3/18 ・・with sliding pins or guides

E05D 3/183 ・・・{with at least one of the hinge parts having a cup-shaped fixing part, e.g. for attachment to cabinets or furniture}

E05D 3/186 ・・・{Scissors hinges, with two crossing levers and five parallel pins}

E05D 5/00 Construction of single parts, e.g. the parts for attachment

E05D 5/02 ・Parts for attachment, e.g. flaps

E05D 5/0207 ・・{for attachment to vehicles (E05D 5/043, E05D 5/062 take precedence)}

E05D 5/0215 ・・{for attachment to profile members or the like}

E05D 5/0223 ・・・{with parts, e.g. screws, extending through the profile wall or engaging profile grooves}

E05D 5/023 ・・・・{with parts extending through the profile wall}

E05D 5/0238 ・・・・{with parts engaging profile grooves}

E05D 5/0246 ・・{for attachment to glass panels}

E05D 5/0276 ・・{for attachment to cabinets or furniture, the hinge having two or more pins (E05D 5/046, E05D 5/065, E05D 7/125 take precedence)}

E05D 5/04 ・・Flat flaps

E05D 5/043 ・・・{specially adapted for vehicles}

E05D 5/046 ・・・{specially adapted for cabinets or furniture}

E05D 5/06 ・・Bent flaps

E05D 5/062 ・・・{specially adapted for vehicles}

E05D 5/065 ・・・{specially adapted for cabinets or furniture}

E05D 5/08 ・・of cylindrical shape

E05D 5/10 ・Pins, sockets or sleeves; Removable pins (E05D 15/522 takes precedence)

E05D 5/12 ・・Securing pins in sockets, movably or not

E05D 5/121 ・・・{Screw-threaded pins}

E05D 5/125 ・・・{Non-removable, snap-fitted pins (removable snap-fitted pins E05D 7/1022, E05D 7/1055)}

E05D 5/127 ・・・{by forcing the pin into the socket (E05D 5/125 takes precedence)}

E05D 5/128 ・・・{the pin having a recess or through-hole engaged by a securing member}

E05D 5/14 ・・Construction of sockets or sleeves

E05D 5/16 ・・・to be secured without special attachment parts on the socket or sleeve

E05D 7/00 Hinges or pivots of special construction (used for special suspension arrangements E05D 15/00; so as to be self-closing E05F 1/06, E05F 1/12; with means for raising wings before being turned E05F 7/02)

E05D 7/0009 ・{Adjustable hinges (E05D 7/04 takes precedence)}

E05D 7/0018 ・・{at the hinge axis}

E05D 7/0027 ・・・{in an axial direction}

E05D 7/0045 ・・・{in a radial direction}

E05D 7/0054 ・・・・{by means of eccentric parts}

E05D 7/009 ・{Elongate hinges, e.g. piano-hinges}

E05D 7/02 ・for use on the right-hand as well as the left-hand side; Convertible right-hand or left-hand hinges

E05D 7/04 ・Hinges adjustable relative to the wing or the frame

E05D 7/0407 ・・{the hinges having two or more pins and being specially adapted for cabinets or furniture}

E05D 7/0415 ・・{with adjusting drive means}

E05D 7/0423 ・・・{Screw-and-nut mechanisms (E05D 7/0407, E05D 7/043 take precedence)}

E05D 7/043 ・・{by means of dowel attachments}

E05D 7/06 ・to allow tilting of the members

E05D 7/08 ・for use in suspensions comprising two spigots placed at opposite edges of the wing, especially at the top and the bottom, e.g. trunnions {(E05D 15/266 takes precedence)}

E05D 7/081 ・・the pivot axis of the wing being situated near one edge of the wing, especially at the top and bottom, e.g. trunnions

E05D 7/082 ・・the pivot axis of the wing being situated at a considerable distance from the edges of the wing, {e.g. for balanced wings}

E05D 7/083 ・・・with a fixed pivot axis

E05D 7/084 ・・・with a movable pivot axis

E05D 7/085 ・・・・with two or more pivot axes, e.g. used at the same time

E05D 7/086 ・・・Braking devices structurally combined with hinges (braking devices for windows per se E05F 5/00)

E05D 7/10 ・to allow easy separation {or connection} of the parts at the hinge axis ({E05D 5/12 and E05D 15/50 take precedence}; substitutes for hinges E05D 1/06)

E05D 7/1005 ・・{by axially moving free pins, balls or sockets}

E05D 7/1011 ・・・{biased by free springs (E05D 7/1016 takes precedence)}

E05D 7/1016 ・・・{requiring a specific angular position}

E05D 7/1022 ・・・{with snap-fitted pins}

E05D 7/1044 ・・{in an axial direction (E05D 7/1005 takes precedence)}

E05D 7/105 ・・・{requiring a specific angular position}

E05D 7/1055 ・・・{with snap-fitted pins}

E05D 7/1061 ・・{in a radial direction (E05D 7/1005 takes precedence)}

E05D 7/1066 ・・・{requiring a specific angular position}

E05D 7/1072 ・・・・{the pin having a non-circular cross-section}

E05D 7/1077 ・・・{with snap-fitted pins}

E05D 7/1083 ・・{facilitating simultaneous assembly of a plurality of hinges, e.g. for mounting heavy wings}

E05D 7/12 ・to allow easy detachment of the hinge from the wing or the frame {(E05D 15/507 takes precedence)}

E05D 7/121 ・・{specially adapted for vehicles}

E05D 7/123 ・・{specially adapted for cabinets or furniture}

E05D 7/125 ・・・{the hinge having two or more pins}

E05D 7/14 ・Hinges for safes

E05D 9/00 Flaps or sleeves specially designed for making from particular material, e.g. hoop-iron, sheet metal, plastics

E05D 9/005 ・{from plastics (E05D 1/02 takes precedence)}

E05D 11/00 Additional features or accessories of hinges {(edge protecting devices E06B 3/88)}

E05D 11/0009 ・{Templates for marking the position of fittings on wings or frames (implements for making doors, windows or frames E04F 21/003)}

E05D 11/0018 ・{Anti-tamper devices}

E05D 11/0027 ・・{arranged on or near the hinge and comprising parts interlocking as the wing closes, e.g. security studs}

E05D 11/0054 ・{Covers, e.g. for protection}

E05D 11/0081 ・{for transmitting energy, e.g. electrical cable routing}

E05D 11/02 ・Lubricating arrangements

E05D 11/04 ・relating to the use of free balls as bearing-surfaces (E05D 7/06 takes precedence)

E05D 11/06 ・Devices for limiting the opening movement of hinges

E05D 11/08 ・Friction devices between relatively-movable hinge parts (E05D 7/086 takes precedence)

E05D 11/081 ・・{with both radial and axial friction, e.g. conical friction surfaces}

E05D 11/082 ・・{with substantially radial friction, e.g. cylindrical friction surfaces}

E05D 11/084 ・・・{the friction depending on direction of rotation or opening angle of the hinge}

E05D 11/087 ・・{with substantially axial friction, e.g. friction disks}

E05D 11/10 ・Devices for preventing movement between relatively-movable hinge parts

E05D 11/1007 ・・{with positive locking}

E05D 11/1014 ・・{for maintaining the hinge in only one position, e.g. closed}

E05D 11/1021 ・・・{the hinge having two or more pins and being specially adapted for cabinets or furniture}

E05D 11/1028 ・・{for maintaining the hinge in two or more positions, e.g. intermediate or fully open}

E05D 11/1042 ・・・{the maintaining means being a cam and a torsion bar, e.g. motor vehicle hinge mechanisms}

E05D 11/105 ・・・{the maintaining means acting perpendicularly to the pivot axis}

E05D 11/1057 ・・・・{specially adapted for vehicles (E05D 11/1064 takes precedence)}

E05D 11/1064 ・・・・{with a coil spring perpendicular to the pivot axis}

E05D 11/1071 ・・・・・{specially adapted for vehicles}

E05D 11/1078 ・・・{the maintaining means acting parallel to the pivot}

E05D 11/1085 ・・・・{specially adapted for vehicles}

E05D 13/00 Accessories for sliding or lifting wings, e.g. pulleys, safety catches ({closers or openers for horizontally sliding wings E05F 1/02, E05F 1/08}; counterbalance devices {for swinging wings}E05F 1/00, E05F 3/00)

E05D 13/003 ・{Anti-dropping devices (E05D 13/1223, E05D 13/1246, E05D 13/1269, E05D 13/1292 take precedence)}

E05D 13/006 ・・{fixed to the wing, i.e. safety catches}

E05D 13/04 ・Fasteners specially adapted for holding sliding wings open ({E05D 15/06B2 takes precedence}; for holding wings closed E05C)

E05D 13/06 ・・with notches {for vertically sliding wings}

E05D 13/08 ・・acting by friction {for vertically sliding wings}

E05D 13/10 ・Counterbalance devices

E05D 13/12 ・・with springs

E05D 13/1207 ・・・{with tension springs}

E05D 13/1215 ・・・・{specially adapted for overhead wings (E05D 13/1223 takes precedence)}

E05D 13/1223 ・・・・{Spring safety devices}

E05D 13/123 ・・・{with compression springs}

E05D 13/1238 ・・・・{specially adapted for overhead wings (E05D 13/1246 takes precedence)}

E05D 13/1246 ・・・・{Spring safety devices}

E05D 13/1253 ・・・{with canted-coil torsion springs}

E05D 13/1261 ・・・・{specially adapted for overhead wings (E05D 13/1269 takes precedence)}

E05D 13/1269 ・・・・{Spring safety devices}

E05D 13/1276 ・・・{with coiled ribbon springs, e.g. constant force springs (E05D 13/1253 takes precedence)}

E05D 13/1284 ・・・・{specially adapted for overhead wings (E05D 13/1292 takes precedence)}

E05D 13/1292 ・・・・{Spring safety devices}

E05D 13/14 ・・with weights

E05D 13/145 ・・・{specially adapted for overhead wings}

E05D 15/00 Suspension arrangements for wings (arrangements of wings not characterised by the construction of the supporting means E06B 3/32)

E05D 15/02 ・for revolving wings

E05D 15/04 ・with arms fixed on the wing pivoting about an axis outside of the wing

E05D 15/06 ・for wings sliding horizontally more or less in their own plane

E05D 15/0604 ・・{allowing an additional movement (E05D 15/10 takes precedence; raising wings before sliding E05D 15/565)}

E05D 15/0608 ・・・{caused by track lay-out}

E05D 15/0613 ・・・・{with multi-directional trolleys}

E05D 15/0617 ・・{of cantilever type}

E05D 15/0621 ・・{Details, e.g. suspension or supporting guides (E05D 15/0604, E05D 15/08 to E05D 15/14 take precedence)}

E05D 15/0626 ・・・{for wings suspended at the top}

E05D 15/063 ・・・・{on wheels with fixed axis}

E05D 15/0634 ・・・・・{with height adjustment}

E05D 15/0639 ・・・・・・{by vertical bolts}

E05D 15/0643 ・・・・{on balls or floating rollers}

E05D 15/0647 ・・・・{on sliding blocks}

E05D 15/0652 ・・・・{Tracks (E05D 15/063 to E05D 15/0647 and E05D 15/0656 take precedence)}

E05D 15/0656 ・・・・{Bottom guides}

E05D 15/066 ・・・{for wings supported at the bottom}

E05D 15/0665 ・・・・{on wheels with fixed axis}

E05D 15/0669 ・・・・・{with height adjustment}

E05D 15/0673 ・・・・・・{by vertical bolts}

E05D 15/0678 ・・・・{on balls or floating rollers}

E05D 15/0682 ・・・・{on sliding blocks}

E05D 15/0686 ・・・・{Tracks (E05D 15/0665 to E05D 15/0682 and E05D 15/0691 take precedence)}

E05D 15/0691 ・・・・{Top guides}

E05D 15/08 ・・consisting of two or more independent parts movable each in its own guides

E05D 15/10 ・・movable out of one plane into a second parallel plane

E05D 15/1002 ・・・{specially adapted for use in railway-cars or mass transit vehicles (E05D 15/1007, E05D 15/1023, E05D 15/1044, E05D 15/1068 take precedence)}

E05D 15/1005 ・・・{the wing being supported on arms movable in horizontal planes}

E05D 15/1007 ・・・・{specially adapted for use in railway-cars or mass transit vehicles}

E05D 15/101 ・・・・{specially adapted for vehicles (E05D 15/1007 takes precedence)}

E05D 15/1013 ・・・・{specially adapted for windows}

E05D 15/1015 ・・・・・{with an intermediate tilt position}

E05D 15/1021 ・・・{involving movement in a third direction, e.g. vertically}

E05D 15/1023 ・・・・{specially adapted for use in railway-cars or mass transit vehicles}

E05D 15/1042 ・・・{with transversely moving carriage (E05D 15/1065 takes precedence)}

E05D 15/1044 ・・・・{specially adapted for use in railway-cars or mass transit vehicles}

E05D 15/1047 ・・・・{specially adapted for vehicles (E05D 15/1044 takes precedence)}

E05D 15/1065 ・・・{with transversely moving track}

E05D 15/1068 ・・・・{specially adapted for use in railway-cars or mass transit vehicles}

E05D 15/1081 ・・・・{specially adapted for vehicles (E05D 15/1068 takes precedence)}

E05D 15/12 ・・consisting of parts connected at their edges

E05D 15/14 ・・with movable arms situated in the plane of the wing

E05D 15/16 ・for wings sliding vertically more or less in their own plane

E05D 15/165 ・・{Details, e.g. sliding or rolling guides (E05D 15/18 to E05D 15/24 take precedence)}

E05D 15/18 ・・consisting of two or more independent parts, movable each in its own guides

E05D 15/20 ・・movable out of one plane into a second parallel plane

E05D 15/22 ・・allowing an additional movement {(E05D 15/20 takes precedence)}

E05D 15/24 ・・consisting of parts connected at their edges

E05D 15/242 ・・・{Hinge connections between the parts}

E05D 15/244 ・・・{Upper part guiding means}

E05D 15/246 ・・・・{with additional guide rail for producing an additional movement}

E05D 15/248 ・・・・{with lever arms for producing an additional movement}

E05D 15/26 ・for folding wings

E05D 15/262 ・・{folding vertically (E05D 15/26B1, E05D 15/26B2B take precedence)}

E05D 15/264 ・・{for bi-fold wings}

E05D 15/266 ・・・{comprising two pivots placed at opposite edges of the wing}

E05D 15/28 ・supported on arms movable in horizontal plane

E05D 15/30 ・・with pivoted arms and sliding guides

E05D 15/32 ・・with two pairs of pivoted arms

E05D 15/34 ・・・with wings opening parallel to themselves

E05D 15/36 ・moving along slide-ways so arranged that one guide-member of the wing moves in a direction substantially perpendicular to the movement of another guide member

E05D 15/38 ・・for upwardly-moving wings, e.g. up-and-over doors

E05D 15/40 ・supported on arms movable in vertical planes

E05D 15/401 ・・{specially adapted for overhead wings (E05D 15/403 to E05D 15/46 take precedence)}

E05D 15/403 ・・{with arms fixed on the wing pivoting about an axis outside the wing}

E05D 15/405 ・・{with curved arms fixed on the wing, rolling on a support}

E05D 15/406 ・・{with pivoted arms and sliding guides (E05D 15/42, E05D 15/44 take precedence)}

E05D 15/408 ・・・{with sliding guides fixed to the wing}

E05D 15/42 ・・with pivoted arms and horizontally-sliding guides

E05D 15/425 ・・・{specially adapted for overhead wings}

E05D 15/44 ・・with pivoted arms and vertically-sliding guides

E05D 15/445 ・・・{specially adapted for overhead wings}

E05D 15/46 ・・with two pairs of pivoted arms

E05D 15/463 ・・・{specially adapted for overhead wings}

E05D 15/466 ・・・{specially adapted for windows}

E05D 15/48 ・allowing alternative movements ({E05D 15/0604 takes precedence}; for vertically-sliding wings E05D 15/22)

E05D 15/50 ・・for opening at either of two opposite edges {(hinges or pivots of special construction to allow easy separation or connection of the parts at the hinge axis E05D 7/10; to allow easy detachment of the hinge from the wing or the frame E05D 7/12)}

E05D 15/502 ・・・{by axial separation of the hinge parts at the hinge axis}

E05D 15/505 ・・・{by radial separation of the hinge parts at the hinge axis}

E05D 15/507 ・・・{by detachment of the hinge from the wing or the frame}

E05D 15/52 ・・for opening about a vertical as well as a horizontal axis

E05D 15/5202 ・・・{with non-horizontally extending checks}

E05D 15/5205 ・・・{with horizontally-extending checks}

E05D 15/5208 ・・・{with means for transmitting movements between vertical and horizontal sliding bars, rods or cables}

E05D 15/5211 ・・・{Concealed suspension fittings}

E05D 15/5214 ・・・{Corner supports}

E05D 15/5217 ・・・{Tilt-lock devices}

E05D 15/522 ・・・with disconnecting means for the appropriate pivoting parts

E05D 15/523 ・・・・using movable rods

E05D 15/524 ・・・・・Actuating mechanisms

E05D 15/526 ・・・Safety devices {(E05D 15/5217 takes precedence)}

E05D 15/54 ・・for opening both inwards and outwards

E05D 15/56 ・with successive different movements {(raising wings before being turned E05F 7/02)}

E05D 15/565 ・・{for raising wings before sliding}

E05D 15/58 ・・with both swinging and sliding movements

E05D 15/581 ・・・{the swinging axis laying in the sliding direction (E05D 15/1015 takes precedence)}

E05D 15/582 ・・・{with horizontal swinging axis (E05D 15/581 takes precedence)}

E05D 15/583 ・・・・{specially adapted for overhead wings}

E05D 2001/00 Pinless hinges; Substitutes for hinges

E05D 2001/04 ・with guide members shaped as circular arcs

E05D 2001/045 ・・for telescopic hinges

E05D 2003/00 Hinges with pins {(E05D 7/08 takes precedence)}

E05D 2003/02 ・with one pin

E05D 2003/025 ・・having three knuckles

E05D 2003/027 ・・・the end knuckles being mutually connected

E05D 2003/06 ・with two or more pins (E05D 7/08 takes precedence)

E05D 2003/16 ・・with seven parallel pins and four arms

E05D 2003/163 ・・・Horizontal pivot-axis

E05D 2003/166 ・・・Vertical pivot-axis

E05D 2005/00 Construction of single parts, e.g. the parts for attachment

E05D 2005/02 ・Parts for attachment, e.g. flaps

E05D 2005/0246 ・・{for attachment to glass panels}

E05D 2005/0253 ・・・the panels having conical or stepped recesses

E05D 2005/0261 ・・・connecting two or more glass panels

E05D 2005/0269 ・・・・the panels being coplanar

E05D 2005/0284 ・・for embedding in concrete or masonry

E05D 2005/0292 ・・for passing through insulating layers

E05D 2005/06 ・・Bent flaps

E05D 2005/067 ・・・gooseneck shaped

E05D 2005/10 ・Pins, sockets or sleeves; Removable pins (E05D 15/522 takes precedence)

E05D 2005/102 ・・Pins

E05D 2005/104 ・・・characterised by the materials

E05D 2005/106 ・・・with non-cylindrical portions

E05D 2005/108 ・・・with elastically deformable parts

E05D 2005/12 ・・Securing pins in sockets, movably or not

E05D 2005/121 ・・・{Screw-threaded pins}

E05D 2005/122 ・・・・externally threaded

E05D 2005/124 ・・・・internally threaded

E05D 2005/14 ・・Construction of sockets or sleeves

E05D 2005/145 ・・・with elastically deformable parts

E05D 2007/00 Hinges or pivots of special construction (used for special suspension arrangements E05D 15/00; so as to be self-closing E05F 1/06, E05F 1/12; with means for raising wings before being turned E05F 7/02)

E05D 2007/0009 ・{Adjustable hinges (E05D 7/04 takes precedence)}

E05D 2007/0018 ・・{at the hinge axis}

E05D 2007/0027 ・・・{in an axial direction}

E05D 2007/0036 ・・・・with axially fixed hinge pins

E05D 2007/0045 ・・・{in a radial direction}

E05D 2007/0054 ・・・・{by means of eccentric parts}

E05D 2007/0063 ・・・・・Eccentric hinge pins

E05D 2007/0072 ・・・・with sliding sleeves

E05D 2007/0081 ・・・・with swinging or rolling sleeves

E05D 2007/04 ・Hinges adjustable relative to the wing or the frame

E05D 2007/043 ・・{by means of dowel attachments}

E05D 2007/0438 ・・・with bolts fixedly mounted on the hinge part

E05D 2007/0446 ・・・with threaded bolts fixedly mounted on the hinge part

E05D 2007/0453 ・・・with threaded sleeves

E05D 2007/0461 ・・in angular arrangement to the wing or the frame

E05D 2007/0469 ・・in an axial direction

E05D 2007/0476 ・・Pocket hinges

E05D 2007/0484 ・・in a radial direction

E05D 2007/0492 ・・in three directions

E05D 2007/10 ・to allow easy separation {or connection} of the parts at the hinge axis ({E05D 5/12 and E05D 15/50 take precedence}; substitutes for hinges E05D 1/06)

E05D 2007/1005 ・・{by axially moving free pins, balls or sockets}

E05D 2007/1027 ・・・by axially moving free pins

E05D 2007/1033 ・・・by axially moving free balls

E05D 2007/1038 ・・・by axially moving free sockets

E05D 2007/1083 ・・{facilitating simultaneous assembly of a plurality of hinges, e.g. for mounting heavy wings}

E05D 2007/1088 ・・・using hinge pins having different lengths

E05D 2007/1094 ・・Guiding devices therefor

E05D 2007/12 ・to allow easy detachment of the hinge from the wing or the frame {(E05D 15/507 takes precedence)}

E05D 2007/126 ・・in an axial direction

E05D 2007/128 ・・in a radial direction

E05D 2011/00 Additional features or accessories of hinges {(edge protecting devices E06B 3/88)}

E05D 2011/0018 ・{Anti-tamper devices}

E05D 2011/0027 ・・{arranged on or near the hinge and comprising parts interlocking as the wing closes, e.g. security studs}

E05D 2011/0036 ・・・near the hinge

E05D 2011/0045 ・・・on the hinge

E05D 2011/0054 ・{Covers, e.g. for protection}

E05D 2011/0063 ・・for screw-heads or bolt-heads

E05D 2011/0072 ・・for the gap between hinge parts

E05D 2011/009 ・Impact absorbing hinges for vehicle doors

E05D 2011/04 ・relating to the use of free balls as bearing-surfaces (E05D 7/06 takes precedence)

E05D 2011/045 ・・located in line with the hinge axis

E05D 2011/08 ・Friction devices between relatively-movable hinge parts (E05D 7/086 takes precedence)

E05D 2011/082 ・・{with substantially radial friction, e.g. cylindrical friction surfaces}

E05D 2011/085 ・・・the friction depending on the opening angle

E05D 2011/088 ・・with automatic disengagement

E05D 2011/10 ・Devices for preventing movement between relatively-movable hinge parts

E05D 2011/1028 ・・{for maintaining the hinge in two or more positions, e.g. intermediate or fully open}

E05D 2011/1035 ・・・with circumferential and evenly distributed detents around the pivot-axis

E05D 2011/1092 ・・the angle between the hinge parts being adjustable

E05D 2015/00 Suspension arrangements for wings (arrangements of wings not characterised by the construction of the supporting means E06B 3/32)

E05D 2015/06 ・for wings sliding horizontally more or less in their own plane

E05D 2015/0621 ・・{Details, e.g. suspension or supporting guides (E05D 15/0604, E05D 15/08 to E05D 15/14 take precedence)}

E05D 2015/0695 ・・・Magnetic suspension or supporting means

E05D 2015/10 ・・movable out of one plane into a second parallel plane

E05D 2015/1018 ・・・with the track rotating around its axis

E05D 2015/1026 ・・・accessories, e.g. sliding or rolling guides, latches

E05D 2015/1028 ・・・with only the wing moving transversely

E05D 2015/1031 ・・・・the wing supported on arms extending from the carriage

E05D 2015/1034 ・・・・・the carriage having means for preventing rotation of the wing

E05D 2015/1036 ・・・・・the arms being movable in vertical, e.g. transverse, planes

E05D 2015/1039 ・・・・the wing sliding transversely on the carriage

E05D 2015/1042 ・・・{with transversely moving carriage (E05D 15/1065 takes precedence)}

E05D 2015/1049 ・・・・the carriage swinging or rotating in a transverse plane

E05D 2015/1052 ・・・・transversely over-dimensioned track sections or carriage

E05D 2015/1055 ・・・・with slanted or curved track sections or cams

E05D 2015/1057 ・・・・・the carriage swinging or rotating in those track sections

E05D 2015/106 ・・・・transversely orientated track sections

E05D 2015/1063 ・・・・disconnecting the carriage from the track

E05D 2015/1065 ・・・{with transversely moving track}

E05D 2015/1071 ・・・・the track being directly linked to the fixed frame, e.g. slidingly

E05D 2015/1073 ・・・・・rocking transversely

E05D 2015/1076 ・・・・・swinging transversely, e.g. on arms

E05D 2015/1078 ・・・・・swinging or rotating in a horizontal plane

E05D 2015/1084 ・・・・the carriage being directly linked to the fixed frame, e.g. slidingly

E05D 2015/1086 ・・・・・swingingly, e.g. on arms

E05D 2015/1089 ・・・・・・the carriage having means for preventing rotation of the wing

E05D 2015/1092 ・・・・・・the carriage swinging or rotating in curved track sections

E05D 2015/1094 ・・・・・・disconnecting itself from the track

E05D 2015/1097 ・・・・with the carriage and track forming a telescopic element

E05D 2015/16 ・for wings sliding vertically more or less in their own plane

E05D 2015/22 ・・allowing an additional movement {(E05D 15/20 takes precedence)}

E05D 2015/225 ・・・specially adapted for overhead wings

E05D 2015/26 ・for folding wings

E05D 2015/268 ・・the wings being successively folded

E05D 2015/48 ・allowing alternative movements ({E05D 15/0604 takes precedence}; for vertically-sliding wings E05D 15/22)

E05D 2015/482 ・・for panic doors

E05D 2015/485 ・・Swinging or sliding movements

E05D 2015/487 ・・Tilting or swinging movements

E05D 2015/52 ・・for opening about a vertical as well as a horizontal axis

E05D 2015/526 ・・・Safety devices {(E05D 15/5217 takes precedence)}

E05D 2015/5263 ・・・・acting parallel to the plane of the wing

E05D 2015/5266 ・・・・acting perpendicular to the plane of the wing

E05D 2015/56 ・with successive different movements {(raising wings before being turned E05F 7/02)}

E05D 2015/58 ・・with both swinging and sliding movements

E05D 2015/585 ・・・with stationary hinge parts

E05D 2015/586 ・・・with travelling hinge parts

E05D 2015/587 ・・・with axially separating hinge parts

E05D 2015/588 ・・・with radially separating hinge parts

E05D 2700/00 Hinges or other suspension devices especially for doors or windows

E05D 2700/02 ・Hinges with one pivot axis and one bearing surface

E05D 2700/04 ・Hinges with one pivot axis and more than one bearing surface

E05D 2700/10 ・Various door and window fittings, e.g. suspension devices for double hung windows or screens

E05D 2700/12 ・Suspension devices for doors or windows movable in a direction perpendicular to their plane or pivotable about an axis being situated at a considerable distance from the edge of the wing by means of pivot arms