WebCPC CPC COOPERATIVE PATENT CLASSIFICATION
B60Y INDEXING SCHEME RELATING TO ASPECTS CROSS-CUTTING VEHICLE TECHNOLOGY
B60Y 2200/00 Type of vehicle (not used; see subgroups)
B60Y 2200/10 ・Road Vehicles
B60Y 2200/11 ・・Passenger cars; Automobiles
B60Y 2200/112 ・・・City movers, small sized city motor vehicles
B60Y 2200/114 ・・・Racing vehicles, e.g. Formula one, Karts
B60Y 2200/116 ・・・Ambulances
B60Y 2200/12 ・・Motorcycles, Trikes; Quads; Scooters
B60Y 2200/122 ・・・Trikes
B60Y 2200/124 ・・・Buggies, Quads
B60Y 2200/126 ・・・Scooters
B60Y 2200/13 ・・Bicycles; Tricycles
B60Y 2200/132 ・・・All terrain bikes
B60Y 2200/134 ・・・Racing bikes
B60Y 2200/14 ・・Trucks; Load vehicles, Busses
B60Y 2200/141 ・・・Light trucks
B60Y 2200/142 ・・・Heavy duty trucks
B60Y 2200/1422 ・・・・Multi-axle trucks
B60Y 2200/143 ・・・Busses
B60Y 2200/1432 ・・・・Low floor busses
B60Y 2200/144 ・・・Garbage trucks, e.g. refuse trucks
B60Y 2200/145 ・・・Haulage vehicles, trailing trucks
B60Y 2200/146 ・・・Silo or fluid transporting vehicles
B60Y 2200/147 ・・・Trailers, e.g. full trailers or caravans
B60Y 2200/148 ・・・Semi-trailers, articulated vehicles
B60Y 2200/15 ・・Fork lift trucks, Industrial trucks
B60Y 2200/16 ・・Vehicles with lowerable bed or chassis, e.g. to facilitate loading
B60Y 2200/20 ・Off-Road Vehicles
B60Y 2200/22 ・・Agricultural vehicles
B60Y 2200/221 ・・・Tractors
B60Y 2200/222 ・・・Harvesters
B60Y 2200/223 ・・・Ridable lawn mowers
B60Y 2200/224 ・・・Boom carrying vehicles, e.g. for irrigation
B60Y 2200/225 ・・・Walk behind vehicles, e.g. motorized wheel barrows
B60Y 2200/23 ・・Ridable golf cars
B60Y 2200/24 ・・Military vehicles (track vehicles L60Y 220/50, tanks L60Y 220/54)
B60Y 2200/25 ・・Track vehicles
B60Y 2200/252 ・・Snowmobiles
B60Y 2200/254 ・・Tanks
B60Y 2200/30 ・Railway vehicles
B60Y 2200/31 ・・Locomotives
B60Y 2200/33 ・・Rail cars; Waggons
B60Y 2200/34 ・・Monorails
B60Y 2200/37 ・・Roller coasters
B60Y 2200/39 ・・having track following mechanism for lateral stability
B60Y 2200/40 ・Special vehicles
B60Y 2200/41 ・・Construction vehicles, e.g. graders, excavators
B60Y 2200/411 ・・・Bulldozers, Graders
B60Y 2200/412 ・・・Excavators
B60Y 2200/413 ・・・Compactors
B60Y 2200/414 ・・・Pavers
B60Y 2200/415 ・・・Wheel loaders
B60Y 2200/416 ・・・Cranes
B60Y 2200/417 ・・・Articulated frame vehicles
B60Y 2200/42 ・・Amphibious vehicles
B60Y 2200/43 ・・Variable track or wheelbase vehicles
B60Y 2200/44 ・・Multi-axle long vehicles, with independently drivable or steerable wheels
B60Y 2200/45 ・・Vehicles having steerable wheels mounted on a vertically moving column
B60Y 2200/46 ・・Arctic-/Extraterrestric explorers
B60Y 2200/47 ・・Climbing vehicles, e.g. facade climbing devices
B60Y 2200/48 ・・・Stair-climbing vehicles
B60Y 2200/49 ・・Movable platforms, Load ramps, e.g. working platforms
B60Y 2200/50 ・Aeroplanes, Helicopters
B60Y 2200/51 ・・Aeroplanes
B60Y 2200/52 ・・Helicopters
B60Y 2200/60 ・Industrial applications, e.g. pipe inspection vehicles
B60Y 2200/62 ・・Conveyors, floor conveyors
B60Y 2200/64 ・・Beam Hoists
B60Y 2200/66 ・・Containers; Pallets; Skids
B60Y 2200/80 ・Other vehicles not covered by groups B60Y 2200/10 to B60Y 2200/60
B60Y 2200/81 ・・Toys
B60Y 2200/83 ・・Perambulators; Buggies; Strollers
B60Y 2200/84 ・・Wheelchairs
B60Y 2200/86 ・・Carts; Golf carts
B60Y 2200/90 ・Vehicles comprising electric prime movers
B60Y 2200/91 ・・Electric vehicles
B60Y 2200/912 ・・・Electric vehicles with power supply external to vehicle, e.g. trolley buses or trams
B60Y 2200/92 ・・Hybrid vehicles
B60Y 2300/00 Purposes or special features of road vehicle drive control systems (for systems using conjoint control of multiple vehicle sub-units B60W 30/00)
B60Y 2300/02 ・Control of vehicle driving stability
B60Y 2300/022 ・・Stability in turns or during cornering
B60Y 2300/0223 ・・・related to over-steering
B60Y 2300/0227 ・・・related to under-steering
B60Y 2300/045 ・・Improving turning performance, e.g. agility of a vehicle in a curve
B60Y 2300/0453 ・・・about the pitch axis
B60Y 2300/0457 ・・・about the roll axis
B60Y 2300/06 ・Automatic manoeuvring for parking
B60Y 2300/08 ・Predicting or avoiding probable or impending collision
B60Y 2300/085 ・・Taking automatic action to adjust vehicle attitude or components thereof in preparation for collision, e.g. adjusting bumpers or wheels or braking for nose dropping
B60Y 2300/09 ・・Taking automatic action to avoid collision, e.g. braking or steering
B60Y 2300/095 ・・Predicting travel path or likelihood of collision
B60Y 2300/0952 ・・・the prediction being responsive to vehicle dynamic parameters
B60Y 2300/0954 ・・・the prediction being responsive to traffic or environmental parameters
B60Y 2300/097 ・・Vehicle operation after collision
B60Y 2300/10 ・Path keeping
B60Y 2300/12 ・・Lane keeping
B60Y 2300/14 ・Cruise control
B60Y 2300/143 ・・Speed control
B60Y 2300/146 ・・・Speed limiting
B60Y 2300/16 ・・Control of distance between vehicles, e.g. keeping a distance to preceding vehicle
B60Y 2300/162 ・・・Speed limiting therefor
B60Y 2300/165 ・・・Automatically following the path of a preceding lead vehicle, e.g. "electronic tow-bar"
B60Y 2300/17 ・・・with provision for special action when the preceding vehicle comes to a halt, e.g. stop-and-go
B60Y 2300/18 ・Propelling the vehicle
B60Y 2300/18008 ・・related to particular drive situations
B60Y 2300/18016 ・・・Start-stop drive, e.g. in a traffic jam
B60Y 2300/18025 ・・・Drive off, accelerating from standstill
B60Y 2300/18033 ・・・Reversing
B60Y 2300/18041 ・・・・Rocking, i.e. fast change between forward and reverse
B60Y 2300/1805 ・・・at stand still, e.g. engine in idling state
B60Y 2300/18058 ・・・Creeping
B60Y 2300/18066 ・・・Coasting
B60Y 2300/18075 ・・・・with torque flow from driveshaft to engine, i.e. engine being driven by vehicle
B60Y 2300/18083 ・・・・without torque flow between driveshaft and engine, e.g. with clutch disengaged or transmission in neutral
B60Y 2300/18091 ・・・Preparing for stopping
B60Y 2300/181 ・・・Hill climbing or descending
B60Y 2300/18108 ・・・Braking
B60Y 2300/18116 ・・・・Hill holding
B60Y 2300/18125 ・・・・Regenerative braking
B60Y 2300/18133 ・・・・Engine braking
B60Y 2300/18141 ・・・・Braking for parking
B60Y 2300/1815 ・・・Cornering
B60Y 2300/18158 ・・・Approaching intersection
B60Y 2300/18166 ・・・Overtaking, changing lanes
B60Y 2300/18175 ・・Preventing, or responsive to skidding of wheels
B60Y 2300/18183 ・・Propulsion control with common controlling member for different functions
B60Y 2300/18191 ・・Propulsion control with control means using analogue circuits, relays or mechanical links
B60Y 2300/182 ・・Selecting between different operative modes, e.g. comfort and performance modes
B60Y 2300/184 ・・Preventing damage resulting from overload or excessive wear of the driveline
B60Y 2300/1845 ・・・Preventing of breakage of drive line components, e.g. parts of the gearing
B60Y 2300/186 ・・・Excessive wear or burn out of friction elements, e.g. clutches
B60Y 2300/1865 ・・・・Overheating of driveline components
B60Y 2300/188 ・・Controlling power parameters of the driveline, e.g. determining the required power
B60Y 2300/1882 ・・・characterised by the working point of the engine, e.g. by using engine output chart
B60Y 2300/1884 ・・・Avoiding stall or over-speed of the engine
B60Y 2300/1886 ・・・Controlling power supply to auxiliary devices
B60Y 2300/1888 ・・・・Control of power take off (PTO)
B60Y 2300/19 ・・Improvement of gear change, e.g. synchronisation or smoothing gear shift
B60Y 2300/192 ・・Power-up or power-down of the driveline, e.g. start up of a cold engine
B60Y 2300/194 ・・・related to low temperature conditions, e.g. high viscosity of hydraulic fluid
B60Y 2300/20 ・・Reducing vibrations in the driveline
B60Y 2300/202 ・・・related or induced by the clutch
B60Y 2300/205 ・・・related or induced by the engine
B60Y 2300/207 ・・・related to drive shaft torsion, e.g. driveline oscillations
B60Y 2300/22 ・・Reducing road induced vibrations, suppressing road noise
B60Y 2300/24 ・・Adaptation to external conditions, e.g. road surface conditions
B60Y 2300/244 ・・・Adaptation to traffic conditions
B60Y 2300/26 ・・Dangerous conditions
B60Y 2300/28 ・related to towing or towed situations
B60Y 2300/30 ・related to stationary vehicle situations, e.g. parked vehicles
B60Y 2300/301 ・・Kneeling, e.g. for letting passengers on or off
B60Y 2300/303 ・・Lowering or adjusting the floor for loading or unloading
B60Y 2300/305 ・・・Adjusting floor height to loading ramp level
B60Y 2300/306 ・・・Mechanism to lock the height
B60Y 2300/308 ・・Jacking-up for changing tyre or for vehicle inspection
B60Y 2300/42 ・Control of clutches
B60Y 2300/421 ・・Control of lock-up type clutches, e.g. in a torque converter
B60Y 2300/423 ・・Control of power take-off clutches
B60Y 2300/424 ・・Control of freewheel clutches
B60Y 2300/425 ・・Control of clutches to regulate engine speed or torque
B60Y 2300/426 ・・Reducing engagement shocks in main clutch
B60Y 2300/427 ・・Control of clutch touch point, e.g. kiss point
B60Y 2300/428 ・・Reducing clutch wear
B60Y 2300/429 ・・Control of secondary clutches in drivelines
B60Y 2300/43 ・Control of engines
B60Y 2300/431 ・・Control of engine air-fuel ratio
B60Y 2300/432 ・・Control of engine fuel injection
B60Y 2300/433 ・・Control of engine throttle
B60Y 2300/434 ・・Control of engine inlet air duct by secondary means
B60Y 2300/435 ・・Control of engine cylinder cut-off
B60Y 2300/436 ・・Control of engine ignition
B60Y 2300/437 ・・Control of engine valves
B60Y 2300/44 ・Control of engine at idle speed
B60Y 2300/45 ・Engine shutdown at standstill
B60Y 2300/46 ・Engine injection cut at coasting
B60Y 2300/47 ・Engine emissions
B60Y 2300/472 ・・Catalyst reactivation
B60Y 2300/474 ・・Catalyst warm up
B60Y 2300/476 ・・Regeneration of particle filters
B60Y 2300/48 ・Engine direct start by injecting fuel and fire
B60Y 2300/49 ・Engine push start or restart by use of vehicle kinetic energy
B60Y 2300/50 ・Engine start by use of flywheel kinetic energy
B60Y 2300/51 ・Driving or powering of engine accessories
B60Y 2300/52 ・Engine fuel consumption
B60Y 2300/525 ・・by reducing drag torque, e.g. by closing valves to reduce pumping
B60Y 2300/53 ・Engine over-speed
B60Y 2300/54 ・Engine overload, high loads on engine
B60Y 2300/55 ・Engine low load mode
B60Y 2300/56 ・Engine stall prevention
B60Y 2300/57 ・Engine torque resume after shifting
B60Y 2300/58 ・Engine torque vibration dampers, e.g. flywheels, dual-mass-springs
B60Y 2300/60 ・Control of electric machines, e.g. problems related to electric motors or generators
B60Y 2300/61 ・・Inductive lock-up
B60Y 2300/62 ・・Mechanical lock-up, e.g. using brake to immobilise the rotor
B60Y 2300/63 ・・Starter motor mode
B60Y 2300/64 ・・Drag run or drag torque compensation, e.g. motor to drive engine with drag torque or engine speed is brought to start speed before injection and firing
B60Y 2300/65 ・・Reduce shocks on mode change, e.g. during engine shutdown
B60Y 2300/66 ・・Control for gear shift synchronisation
B60Y 2300/67 ・・High load on electric machines, e.g. overheating
B60Y 2300/68 ・・Over-speed of electric machines
B60Y 2300/69 ・・Motor boost, e.g. short time overpower
B60Y 2300/70 ・Control of gearings
B60Y 2300/71 ・・Limiting transmission input torque
B60Y 2300/72 ・・Facilitate disengaging of gears, e.g. by inducing a torque reversal
B60Y 2300/73 ・・Synchronisation of shaft speeds
B60Y 2300/74 ・・Reducing shift shocks
B60Y 2300/75 ・・Dither torque , e.g. to remove tooth butting
B60Y 2300/77 ・・Torque reversal, e.g. avoid clunks when changing between driving and coasting
B60Y 2300/78 ・・Power split
B60Y 2300/785 ・・・Geared neutral
B60Y 2300/80 ・Control of differentials
B60Y 2300/82 ・・Torque vectoring
B60Y 2300/84 ・・Differential locking
B60Y 2300/88 ・Reducing brake wear
B60Y 2300/89 ・Repartition of braking force, e.g. friction braking versus regenerative braking
B60Y 2300/90 ・Releasing parking brake at start
B60Y 2300/91 ・Battery charging
B60Y 2300/92 ・Battery protection from overload or overcharge
B60Y 2302/00 Responses or measures related to driver conditions (for propulsion units B60K 28/02, related to driving style L60W 40/08B)
B60Y 2302/01 ・Preventing starting of the vehicle
B60Y 2302/03 ・Actuating a signal or alarm device
B60Y 2302/05 ・Leading to automatic stopping of the vehicle
B60Y 2302/07 ・Disabling particular vehicle functions, e.g. to affect the driving style
B60Y 2302/09 ・Reducing the workload of driver
B60Y 2304/00 Optimising design; Manufacturing; Testing
B60Y 2304/01 ・Minimizing space with more compact designs or arrangements
B60Y 2304/03 ・Reducing weight
B60Y 2304/05 ・Reducing production costs, e.g. by redesign
B60Y 2304/07 ・Facilitating assembling or mounting
B60Y 2304/072 ・・by preassembled subunits
B60Y 2304/074 ・・by improved accessibility
B60Y 2304/076 ・・by add-on parts, e.g. retrofit
B60Y 2304/078 ・・by interchangeable parts, e.g. new part adapting to old design
B60Y 2304/09 ・Testing or calibrating during manufacturing
B60Y 2306/00 Other features of vehicle sub-units
B60Y 2306/01 ・Reducing damages in case of crash, e.g. by improving battery protection
B60Y 2306/03 ・Lubrication
B60Y 2306/05 ・Cooling
B60Y 2306/07 ・Heating of passenger cabins
B60Y 2306/09 ・Reducing noise
B60Y 2306/11 ・Noise generation, e.g. drive noise to warn pedestrians that an electric vehicle is approaching
B60Y 2306/13 ・Failsafe arrangements
B60Y 2306/15 ・Failure diagnostics
B60Y 2400/00 Special features of vehicle units
B60Y 2400/10 ・Energy storage devices
B60Y 2400/102 ・・for hydrogen fuel
B60Y 2400/104 ・・for liquid petrol gas
B60Y 2400/106 ・・for gasoil
B60Y 2400/11 ・Electric energy storages
B60Y 2400/112 ・・Batteries
B60Y 2400/114 ・・Super-capacities
B60Y 2400/14 ・Hydraulic energy storages, e.g. hydraulic accumulators
B60Y 2400/15 ・Pneumatic energy storages, e.g. pressure air tanks
B60Y 2400/16 ・Mechanic energy storages
B60Y 2400/162 ・・Flywheels
B60Y 2400/164 ・・Springs
B60Y 2400/20 ・Energy converters
B60Y 2400/202 ・・Fuel cells
B60Y 2400/204 ・・Generator sets, engine and generator as one unit
B60Y 2400/206 ・・Thermo-electric generators
B60Y 2400/208 ・・Peltier or Thomson elements for cooling or heating
B60Y 2400/209 ・・Piezo-electric elements
B60Y 2400/21 ・External power supplies
B60Y 2400/212 ・・by power from overhead cables using trolleys
B60Y 2400/214 ・・by power from domestic supply, e.g. plug in supplies
B60Y 2400/216 ・・by solar panels
B60Y 2400/30 ・Sensors
B60Y 2400/301 ・・for position or displacement
B60Y 2400/3012 ・・・using Hall effect
B60Y 2400/3015 ・・・Optical cameras
B60Y 2400/3017 ・・・Radars
B60Y 2400/3018 ・・Flow-meters
B60Y 2400/3019 ・・Fluid level sensors
B60Y 2400/302 ・・Temperature sensors
B60Y 2400/303 ・・Speed sensors
B60Y 2400/3032 ・・・Wheel speed sensors
B60Y 2400/304 ・・Acceleration sensors
B60Y 2400/3042 ・・・Collision sensors
B60Y 2400/3044 ・・・Vibration sensors
B60Y 2400/305 ・・Force sensors
B60Y 2400/306 ・・Pressure sensors
B60Y 2400/307 ・・Torque sensors
B60Y 2400/308 ・・Electric sensors
B60Y 2400/3084 ・・・Electric currents sensors
B60Y 2400/3086 ・・・Electric voltages sensors
B60Y 2400/40 ・Actuators for moving a controlled member
B60Y 2400/402 ・・Manual actuators, i.e. input levers or linkages therefor
B60Y 2400/4024 ・・・with adjustable positions
B60Y 2400/4026 ・・・providing feel, e.g. with feedback force
B60Y 2400/404 ・・Electro-magnetic actuators, e.g. with an electromagnet not rotating for moving a clutching member
B60Y 2400/4045 ・・・Electro-magnetic valves, i.e. solenoids
B60Y 2400/405 ・・Electric motors actuators
B60Y 2400/406 ・・Hydraulic actuators
B60Y 2400/408 ・・Pneumatic actuators
B60Y 2400/41 ・・Mechanical transmissions for actuators
B60Y 2400/411 ・・・Bowden cables or linkages
B60Y 2400/4115 ・・・・Lost motion linkages
B60Y 2400/4117 ・・・・Slack adjustments
B60Y 2400/412 ・・・Screw-nut mechanisms
B60Y 2400/414 ・・・Ramp or cam mechanisms
B60Y 2400/416 ・・・Centrifugal actuators
B60Y 2400/418 ・・Power assistance, e.g. servo-motors
B60Y 2400/4185 ・・・Mechanical assistance, i.e. using springs or accumulators without feedback control
B60Y 2400/4187 ・・・Servo-motors, e.g. electric or fluidic with feedback control
B60Y 2400/42 ・Clutches or brakes
B60Y 2400/421 ・・Dog type clutches or brakes
B60Y 2400/422 ・・Synchromesh type clutches or brakes
B60Y 2400/423 ・・Electromagnetic clutches, e.g. powder type clutches
B60Y 2400/424 ・・Friction clutches
B60Y 2400/4242 ・・・of dry type
B60Y 2400/4244 ・・・of wet type, e.g. using multiple lamellae
B60Y 2400/425 ・・Viscous couplings
B60Y 2400/426 ・・Hydrodynamic couplings, e.g. torque converters
B60Y 2400/427 ・・One-way clutches
B60Y 2400/428 ・・Double clutch arrangements; Dual clutches
B60Y 2400/43 ・Engines
B60Y 2400/431 ・・Gas turbine engines
B60Y 2400/432 ・・Diesel Engines
B60Y 2400/433 ・・Gas Engines, e.g. using LPG, natural gas or gasifiers
B60Y 2400/434 ・・Hydrogen fuel engines
B60Y 2400/435 ・・Supercharger or turbochargers
B60Y 2400/436 ・・Electromagnetic engines valves
B60Y 2400/44 ・・Exhaust turbines driving generators
B60Y 2400/442 ・・Exhaust gas recirculation (EGR)
B60Y 2400/446 ・・Exhaust gas reformers, e.g. treated by fuel cells
B60Y 2400/46 ・Engine start hydraulic or electric motors
B60Y 2400/47 ・Starter generator drive systems
B60Y 2400/48 ・Vibration dampers, e.g. dual mass flywheels
B60Y 2400/60 ・Electric Machines, e.g. motors or generators
B60Y 2400/602 ・・DC Machines
B60Y 2400/604 ・・AC Machines, e.g. asynchronous motors
B60Y 2400/607 ・・Axial flux machines
B60Y 2400/608 ・・Clutch motors, i.e. having rotating stators
B60Y 2400/61 ・Arrangements of controllers for electric machines, e.g. inverters
B60Y 2400/70 ・Gearings
B60Y 2400/702 ・・Worm gearings
B60Y 2400/71 ・・Manual or semi-automatic, e.g. automated manual transmissions
B60Y 2400/72 ・・Continous variable transmissions (CVT)
B60Y 2400/73 ・・Planetary gearings
B60Y 2400/732 ・・・with intermeshing planetary gears, e.g. Ravigneaux
B60Y 2400/74 ・・Shaft brakes, e.g. input shaft brakes
B60Y 2400/75 ・・Power shifting, e.g. without interruption of drive torque
B60Y 2400/76 ・・Automatic gearshift to neutral
B60Y 2400/77 ・・Gearshift position determination, e.g. check of neutral position
B60Y 2400/78 ・・Pumps, e.g. jet type
B60Y 2400/785 ・・・Pump drives
B60Y 2400/79 ・・Drive shafts, output shafts or propeller shafts
B60Y 2400/795 ・・・Power take off
B60Y 2400/80 ・Differentials
B60Y 2400/802 ・・Differential locking systems
B60Y 2400/804 ・・Torque vectoring arrangements
B60Y 2400/81 ・Braking systems
B60Y 2400/82 ・Four wheel drive systems
B60Y 2400/83 ・Steering input members
B60Y 2400/84 ・Rear wheel steering; All wheel steerings
B60Y 2400/85 ・Skid-steer systems, e.g. for tracked vehicles
B60Y 2400/86 ・Suspension systems
B60Y 2400/87 ・Auxiliary drives
B60Y 2400/88 ・・Air conditioners, e.g. compressor drives
B60Y 2400/89 ・・Cooling systems, e.g. fan drives
B60Y 2400/90 ・Driver alarms
B60Y 2400/902 ・・giving haptic or tactile signals
B60Y 2400/92 ・Driver displays
B60Y 2410/00 Constructional features of vehicle sub-units
B60Y 2410/10 ・Housings
B60Y 2410/102 ・Shaft arrangements; Shaft supports, e.g. bearings
B60Y 2410/1022 ・・Concentric shaft arrangements
B60Y 2410/104 ・Hydraulic valves
B60Y 2410/105 ・Valve bodies; Mounting of hydraulic controllers
B60Y 2410/111 ・Aggregate identification or specification, e.g. using RFID
B60Y 2410/113 ・Mount clips, snap-fit, e.g. quick fit with elastic members
B60Y 2410/114 ・Shields, e.g. for heat protection
B60Y 2410/115 ・Electric wiring; Electric connectors
B60Y 2410/12 ・Production or manufacturing of vehicle parts
B60Y 2410/121 ・・Metal parts manufactured by moulding
B60Y 2410/122 ・・Plastic parts manufactured by moulding
B60Y 2410/123 ・・Over-moulded parts
B60Y 2410/124 ・・Welded parts
B60Y 2410/125 ・・Bounded parts
B60Y 2410/13 ・Materials or fluids with special properties
B60Y 2410/132 ・・Magnetic, e.g. permanent magnets
B60Y 2410/134 ・・Rheological, magneto- or electro- fluids
B60Y 2410/136 ・・Memory alloys
--- Edited by Muguruma Professional Engineer Office(C), 2013 ---