| | |
1 | MISCELLANEOUS |
1.5 | NECKED RECEPTACLE SEAL CUTTERS |
2 | CARTON OPENERS |
400 | CAN OPENER |
401 | .With control means energized in response to activator stimulated by condition sensor |
402 | ..Unicyclic reciprocating punch |
403 | ..With stopping upon completion of cut |
404 | ...Responsive to reaction force between can and cutter |
405 | ..Responsive to can |
406 | .With sanitizer |
407 | .Including spout former |
408 | .With other cutlery means |
409 | .Adapted for right or left hand operation |
410 | .With lid retainer or lifter |
411 | .With can closure means |
412 | .Including plural independent cutters |
413 | ..Progressive fulcrum |
414 | ..Including punch |
415 | .Including plural sequentially operated cutters |
416 | .With driven roller to continuously engage bead and relatively rotate can and opener |
417 | ..Side cut |
418 | ...Cutter comprising driven disc |
419 | ..With means enabling quick release of cutter |
420 | ..Roller drive means causes initial piercing |
421 | ...Including prime mover |
422 | ...Cutter comprising rotatable disc |
423 | ..Including prime mover |
424 | ...Cutter comprising rotatable disc |
425 | ....Driven disc |
426 | ..Cutter comprising rotatable disc |
427 | ...Driven disc |
428 | .Including shear couple |
429 | .Progressive fulcrum |
430 | ..Side cut |
431 | ..Cutter pivoted to reaction member |
432 | ..With guide |
433 | .With means to relatively rotate can and opener |
434 | ..Comprising means to rotate can |
435 | .Including sweep cutter |
436 | ..With can support |
437 | ..With can penetrating pivot |
438 | ...Variable cutter radius |
439 | ....Freely slidable cutter |
440 | .....Cutter comprising rotatable disc |
441 | ....Cutter comprising rotatable disc |
442 | ..With means to grip can |
443 | .Including punch |
444 | ..With prime mover to drive cutter relative to can |
445 | ..Peripheral punch |
446 | ..Plural-spaced cutting edges |
447 | ...With can support |
448 | ..With can support |
449 | ..Traversing punch |
450 | ..And fulcrum |
26 | MANICURE |
27 | .Guarded edge |
28 | .Nippers |
29 | .Shears |
29.5 | HAIR CUTTERS FOR INSIDE NOSE OR EAR |
30 | HAIR PLANERS |
31 | .Convertible |
32 | RAZORS |
34.05 | .Combined |
34.1 | ..With additional cutter means |
34.2 | ..With means to raise the hair and/or stretch the skin |
35 | ..With means to facilitate sharpening |
36 | ...Permanently attached sharpener |
37 | ...Means for holding or guiding sharpener |
38 | ....Blade-shifting mechanism |
39 | .....Safety impulse |
40 | ..With blade magazine |
40.1 | ...Strip feed |
40.2 | ...Detachable magazine |
41 | ..With waste-collecting, razor-cleaning and/or dispensing |
41.5 | ...With fluid-current disposal means |
41.6 | ...Hair-collecting means |
41.7 | ..With blade usage indicator |
41.8 | ..With blade flexure indicator |
41.9 | .With cooperating nipping blades |
43 | .With cooperating shearing blades |
43.1 | ..With razor-adjusting means |
43.2 | ...Adjusting spacing between blades |
43.3 | ..With compound movement of blade |
43.4 | ..Rotary blade |
43.5 | ...Rotary inner blade |
43.6 | ....And stationary outer blade |
43.7 | ..Oscillating blade |
43.8 | ...Oscillating inner blade |
43.9 | ....And stationary outer blade |
43.91 | ..Reciprocating inner blade |
43.92 | ...And stationary outer blade |
42 | .With blade-moving means |
44 | ..Vibratory |
45 | ...Electric |
46 | ...Traction |
47 | .Knockdown and/or folding |
48 | .Inclined edge |
49 | .Curved edge |
50 | .Multiple blade |
51 | .Detachable blade, guarded cutting edge |
52 | ..Tensioned blade edge |
53 | ..Longitudinal or old style |
54 | ...With relative blade and guard adjustment |
55 | ...Separable guard |
57 | ..Pivoted blade |
58 | ..Pivoted cap |
59 | ...Multiple guard |
60 | ....With operator and relative blade and guard adjustment |
60.5 | .....Sectional cap |
61 | ...With operator and relative blade and guard adjustment |
62 | ..Slidable blade |
63 | ...With relative blade and guard adjustment |
64 | ...With blade lock |
65 | ...Multiple guard |
66 | ..Slidable lock |
67 | ..Hook and lock |
68 | ..Bolt-connected |
69 | ...Threaded |
70 | ....Multiple guard |
71 | .....With relative blade and guard adjustment |
72 | ......Flexible blade |
73 | .......Spaced guard edge |
74 | ..Magnetic |
74.1 | ..Multiple guard |
75 | ..Aligning means |
76 | ..Corner construction |
77 | ..Guards |
78 | ...Blade-supported |
79 | ....With relative blade and guard adjustment |
80 | .....Rail guard |
81 | ...Edge structure |
82 | ....Modified teeth |
83 | ...Rail |
84 | ..Caps |
526 | .Including particular handle or razor handle, per se |
527 | ..Having pivotal connection to blade |
528 | ...With blade extending longitudinally to handle |
529 | ...Ball and socket joint |
530 | ...Slotted pintle |
531 | ...Including separate means to retain joint in selected position |
532 | ...With means to facilitate assembly and disassembly of blade head from handle |
533 | ....Retractable pintle with limited motion |
534 | ..Having threaded connection means between blade head and handle |
535 | ..Having receptacle |
536 | ...Providing blade supply |
537 | .Attachment or accessory |
538 | ..Blade conditioner (e.g., lubricator) |
539 | ..Protective blade cover |
540 | ...Made of flexible material |
541 | ..Razor holder or storage receptacle |
451 | STATIC PENCIL SHARPENER |
452 | .Plural, sequentially engaged cutters |
453 | .With debris receiver |
454 | ..Conical or cylindrical work guide |
455 | ..Surface type cutter |
456 | .Work piece drawn over transverse, single edge cutter |
457 | .Having conical or cylindrical work guide |
458 | ..And mounting base or handle |
459 | ...With diverse feature |
460 | ..Open-ended for point protection during writing |
461 | ..Adjustable or resilient cutter structure |
462 | .Surface type cutter |
475 | POWERED PLANER |
476 | .With rolling supports (e.g., wheels, casters) |
477 | .Tool rotates about axis perpendicular to work |
478 | BENCH PLANE |
479 | .Core box former type |
480 | .Strip cutter |
481 | .With gauge or guide |
482 | .Having plane extension |
483 | .With lubricant dispenser |
484 | .To form configured or beveled surface |
485 | ..Changable |
486 | ..Recess forming |
487 | .Having means for adjusting cutting blade |
488 | ..Pivoted lever and screw |
489 | ..Screw |
490 | .Adjustable mouthpiece |
491 | .Handle or handle attaching means |
492 | .Cutting blade clamp |
493 | .Cutting blade |
494 | BILLIARD CUE TRIMMER |
495 | CYLINDRICAL TENON CUTTER |
90.1 | MEANS FOR CUTTING ELONGATE, STRAND-ENCIRCLING SHEATH |
90.2 | .Helically wound metal sheath |
90.3 | ..Including rotary cutter |
90.4 | .Longitudinally |
90.6 | ..With additional means for cutting sheath other than longitudinally |
90.7 | ..Adjustable to also cut sheath other than longitudinally |
90.8 | ..With cutter-opposing, sheath-engaging surface |
90.9 | ...Roller surface |
91.1 | ...Pivotally connected to cutter |
91.2 | .With cutter-opposing, sheath-engaging surface pivotally connected to cutter |
92 | PIPE AND ROD CUTTERS |
92.5 | .Adapted to cut pipe or rod longitudinally |
93 | .Rotary |
94 | ..External |
95 | ...Pipe- or rod-encircling |
96 | ....With clamping means |
97 | .....Rotary power source |
98 | .....Ratchet |
99 | ....Ratchet |
100 | ....Chain link type |
101 | ....Disc cutter |
102 | ...Disc cutter |
103 | ..Internal |
104 | ...Eccentrically pivoted |
105 | ...Slidably projected |
106 | ....Wedge |
107 | .....Screw feed |
108 | ...Pivoted lever mounted |
109 | CIGAR TIP CUTTERS |
110 | .Rotary power source |
111 | .Hand |
112 | ..Pivoted blade |
113 | ..Reciprocating blade |
113.1 | CORE-PIT REMOVERS |
113.2 | .Including pivoted tool-pair members |
113.3 | .Combined |
114 | SEGMENTERS |
115 | PLASTIC MATERIAL CUTTERS |
116 | .Wire |
117 | ..Plural |
118 | BUTTONHOLE TYPE |
119 | .With punch |
120 | .Shears |
120.1 | SHELL OPENERS |
120.2 | .Nutcrackers |
120.3 | ..Arcuately moved jaws |
120.4 | ...Plural or relatively movable pivot |
120.5 | ..Lever-actuated jaws |
358 | PERFORATING OR INDENTING IMPLEMENTS |
359 | .Combined with other type cutter |
360 | .With portion positioned in work aperture |
361 | .Work-mounted |
362 | .Hand-guided, motor-driven |
363 | .Pivoted handles |
364 | ..Turret of tools |
365 | .Traveling roller |
366 | .Pointed |
367 | ..With impact drive |
368 | ..With stripper, sheath or gauge |
121 | TREE HACKS |
121.5 | CORN STRIPPERS |
122 | CONVERTIBLE |
123 | COMBINED CUTLERY OR COMBINED WITH ANCILLARY FEATURE |
123.3 | .With means to apply transient fluid to tool |
123.4 | ..To chain saw chain or guide therefor |
123.5 | .With skin-removal means |
123.6 | ..Including relatively movable parts |
123.7 | ..Including a pointed blade |
124 | .With material-holder or disposal |
125 | ..Handle receptacle |
127 | ..Twine guide |
128 | ..Ejectors or strippers |
129 | ...Fork |
130 | ...Annular cutter |
131 | ..Shears |
132 | ...Multiple shearing position |
133 | ....Suction-disposal means |
134 | ...Grip type |
135 | ....Spring-opened |
136 | ..Knives and scrapers |
136.5 | ...With closure or portable receptacle support |
137 | ..Forks |
138 | .With sharpening feature |
139 | ..Rotary sharpener |
140 | .With heater |
141 | .Spoons with fluid conductors |
142 | .Cutlery |
143 | ..Sheathed |
144 | ..Saws |
145 | ..Nippers and shears |
146 | ..Shears and knives |
147 | ..Knives, forks, and spoons |
148 | ..Knives and forks |
149 | ..Knives and spoons |
150 | ..Forks and spoons |
151 | SHEATHED |
152 | .Plural blade |
153 | .Folding sheath |
154 | .Compound blade movement |
155 | .Pivoted blade |
156 | ..Detachable blade type |
157 | ...End tang connected |
158 | ..With blade-opening means |
159 | ...Spring-opened |
160 | ...Locked blade |
161 | ..Locked blade |
162 | .Sliding blade |
163 | ..Gravity-opened |
164 | .Elements |
164.5 | ICE PICK OR CHIPPER TYPE |
164.6 | .With impact-moving means |
164.7 | .With guard and/or guide |
164.8 | .Plural points or edges |
164.9 | SCRATCHING IMPLEMENTS |
164.95 | .Having traction-rotated tool (e.g., glass cutters) |
165 | CUTTING TOOLS |
166.3 | .Saw |
369 | ..Including contiguous oppositely moving blade portions |
370 | ..With work-underlying guard means |
371 | ..With work-engaging member |
372 | ...Affixed to work |
373 | ...Slidable guide plate parallel to saw blade |
374 | ...Slidable guide plate intersected by saw blade |
375 | ....Including relatively adjustable saw blade and guide plate |
376 | .....To vary angle between saw and guide plate |
377 | .....To vary projection of saw blade |
378 | ...Including means to press work to saw blade |
379 | ..On vehicle moved during cutting |
379.5 | ..On vehicle, moved relative thereto during cutting |
380 | ..Band |
381 | ..Chain |
382 | ...With guard means |
383 | ...With guide bar for cutting span |
384 | ....Including nondriving guide pulley |
385 | .....And means to adjust guide pulley relative to guide bar |
386 | ....Including means to adjust guide bar relative to its support |
387 | ....Multisectioned guide bar |
388 | ..Rotary |
389 | ...With peripheral drive means |
390 | ...With guard means |
391 | ....Movable to nonguarding position |
392 | ..With means to reciprocate saw |
393 | ...In uniplanar compound path |
394 | ...Including connecting rod articulated with saw blade or support |
501 | ..Having plural cutting edges |
502 | ...Oppositely directed cutting edges |
503 | ...Simultaneously cutting |
503.5 | ....Parallel cutting |
504 | ..Having tooth or blade protective or strengthening means |
505 | ..With gauge for limiting depth of cut |
506 | ..Mounted in truss frame (e.g., bucksaw) |
507 | ..Mounted in U-frame |
508 | ...Offset blade |
509 | ...Coping saw |
510 | ...Extensible |
511 | ....Length and depth |
512 | ...Collapsible frame |
513 | ...Blade-tensioning means |
514 | ..With accessory and handle |
515 | ...Lubricant dispenser |
516 | ...Dust blower |
517 | ...Handle |
518 | ....Offset |
519 | ....Angularly adjustable |
520 | ....Double grip |
521 | ....Spindle type (e.g., for double end cross-cut saw) |
522 | .....Having side clamping plates |
523 | .....Fastener passes through transverse passage in handle |
524 | .....Fastener passes through longitudinal extending passage in handle |
525 | ....Scroll type |
168 | .Cold chisels |
167 | .Chisel |
167.1 | ..Compound |
167.2 | ..With gauge |
169 | .Scrapers |
170 | ..Wheeled |
171 | ..Hoe type |
172 | ..Plural blade |
173 | .Plural cooperating blades |
174 | ..Corer type |
175 | ..Nippers |
176 | ...Multiplex |
177 | ...Adjustable-position cutter |
178 | ...Form cutter |
179 | ...With guide and/or gauge |
180 | ...With motor |
181 | ...Compound blade movement |
182 | ...Reciprocating blade |
183 | ....Lever and cam |
184 | ....Lever and link |
185 | ....Toothed slide and lever |
186 | ...Pivoted blade |
187 | ....With blade-moving means |
188 | .....One movable blade |
189 | ......Lever and cam |
190 | ......Lever and link |
191 | .....Pivoted handles |
192 | ......Handles interlinked or geared |
193 | ......Common pivot |
194 | ..Shears |
195 | ...Hair thinners |
196 | ...Multiple shearing position |
197 | ....Multiplex |
198 | ....Body-supported |
199 | ....Adjustable angle |
200 | ....With cut regulator |
201 | .....Adjustable |
202 | ......Automatic |
203 | ....Convertible, power- or manual-operated |
204 | ....Compound blade movement |
205 | ....Rotary blade |
206 | .....With motor |
207 | .....With blade-tension means |
208 | ....Reciprocating and/or oscillating blade |
209 | .....Reciprocating or oscillating power source |
210 | ......With motor |
211 | ......Pivoted handles |
212 | .......With spring return |
213 | ........And blade-tension means |
214 | .......With blade-tension means |
215 | .....Rotary power source |
216 | ......With motor |
217 | ......Crank or cam, pitman and lever |
218 | ......Crank or cam, lever and slide |
219 | ......Crank or cam and lever |
220 | ......Crank or cam and slide |
221 | .....With blade-tension means |
222 | ......And friction reducing feature |
223 | ....Blade assembly |
224 | .....With friction reducing feature |
225 | ....Blades |
226 | ...Multiplex |
227 | ....With blade-moving means |
228 | ...With motor |
229 | ...Form cutter |
230 | ....Zigzag |
231 | ...With supports |
232 | ....Hand or finger |
233 | ...With guard, guide and/or gauge |
233.5 | ....Comb type |
234 | ...Spring joint |
235 | ....Offset handles and blade |
236 | ....Detachable blade |
237 | ...Compound blade movement |
238 | ....One movable blade |
239 | ....Intermediate pivot |
240 | ...Rotary blade |
241 | ...Reciprocating blade |
242 | ....Lever and link |
243 | ....Toothed lever and slide |
244 | ...Pivoted blade |
245 | ....With blade-moving means |
246 | .....Push or pull type |
247 | .....Rotary power source |
248 | .....Offset blade and handle |
249 | .....One movable blade |
250 | ......Pivoted handle |
251 | .......Lever and connecting link |
252 | .....Pivoted handles |
253 | ....End pivot |
254 | ....Intermediate pivot |
255 | .....Foldable |
256 | .....Right or left hand |
257 | .....Offset blade and handle |
258 | .....Blade and slot |
259 | .....Offset pivot |
260 | .....Detachable blade and handle |
261 | .....Spring opened or closed |
262 | ......With latch |
263 | ..Rotary blade |
264 | ...With motor |
265 | ...Two rotary blades |
266 | ..Joints and blade-tension means |
267 | ...With friction-reducing feature |
268 | ...Spring tension |
269 | ....Threadless pin type |
270 | ...Nut lock type |
271 | ..Stops and bumpers |
272.1 | .With blade moving means |
273 | ..Base-supported |
274 | ...Band knife |
275 | ...With presser foot |
275.4 | ..With support or attaching means |
276 | ..Rotary blade |
277 | ..Impact |
277.4 | ..Including a motor |
278 | .With material receiving opening |
279.2 | ..Plural blade or cutting edge |
279.4 | ...Swinging-stroke vegetation cutter |
279.6 | ...Border of opening limits cutting depth, e.g., peeler |
280 | ..Push or pull type |
281 | ...Spoke shave type |
282 | ..With blade guide |
283 | ..Adjustable |
284 | ...Detachable guard |
285 | ..Detachable guard |
286 | .With guard and/or guide |
287 | ..Plural blade or cutting edge |
288 | ..Diverse kinds |
289 | ..Blade or material guide |
290 | ...With support |
291 | ....Hand- or finger-supported |
292 | ...Traveling roller blade |
293 | ...Adjustable |
294 | ...Push or pull type |
295 | ..Hand guard |
296.1 | .With support or attaching means |
297 | ..Leg- or foot-supported |
298 | ..Hand- or finger-supported |
298.4 | ..Nonuse support |
299 | .Plural blade |
300 | ..Sweep cutter |
301 | ..Annular blade |
302 | ...With radiating or crossed blades |
303 | ..Radiating or crossed blades |
304 | ..Parallel blades |
305 | ...Push or stamp type |
306 | ..Traveling roller cutter |
307 | ...Disc blade |
308 | .Cleaver type |
308.1 | .Hatchet, ax, or adze |
308.2 | ..Foldable to cover bit |
308.3 | ..Detachable bit |
309 | .Sickle or scythe type |
310 | .Sweep cutter |
312 | .Plural handle or grip |
313 | ..Draw knives |
314 | .Push and/or pull type |
315 | ..Push or stamp type |
316 | ...Annular blade |
317 | ..Pull type |
318 | .Swing stroke type |
319 | .Traveling roller blade |
320 | .Adjustable blade |
321 | ..Pivoted |
322 | FORKS |
323 | .With hand guard and/or support |
324 | SPOONS |
325 | .Perforated |
326 | .With cover and/or guard |
327 | .With support |
328 | .Reinforced |
329 | HOLDERS FOR DETACHABLE BLADES |
330 | .Pivoted part |
331 | ..End pivot |
332 | .Knockdown holders |
333 | ..One movable side |
334 | .U-strap holder |
335 | .Sliding-blade assembly |
336 | ..Spring jaw type |
337 | .Interlocked blade and holder |
338 | ..Spring jaw type |
339 | ..Apertured blade |
340 | HANDLES AND BLADE CONNECTIONS |
341 | .Shear or nipper type |
342 | .Blade connections |
343 | ..Cast-on handle |
344 | ..Welded, riveted or bolted |
345 | MATERIALS |
346 | BLADES |
346.5 | .Razor blade |
346.51 | ..Cutting couple element |
346.52 | ..Having indicia |
346.53 | ..Of specific material |
346.54 | ...Including metallurgical characteristic |
346.55 | ..Including details of cutting edge |
346.56 | ...Toothed or waved edge |
346.57 | ..Having three or more cutting edges |
346.58 | ..Composite razor blade |
346.59 | ...Interfitting sections |
346.6 | ..Reinforces |
346.61 | ..Apertured, notched or lugged |
347 | .Rotary |
348 | .Reinforced |
349 | .Detachable cutting edge |
350 | .Metallurgical feature |
351 | .Apertured, notched or lugged |
352 | .Reamer type |
353 | .Plural cutting edge |
355 | .Toothed or waved |
356 | .Longitudinally curved |
357 | .Edge structure |
500 | IMPLEMENTS ADAPTED TO BE DRIVEN BY DETACHABLE PORTABLE POWER-DRIVE MEANS (E.G., ELECTRIC DRILL) |
| ************** |
| FOREIGN ART COLLECTIONS |
| ************** |
| Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collection listed below.These collections contain ONLY foreign patents or nonpatent literature.The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived |
| RAZORS (30/32) |
FOR 100 | .Handles (30/85) |
FOR 101 | ..Receptacle (30/86) |
FOR 102 | ..Pivoted (30/87) |
FOR 103 | ..Longitudinal (30/88) |
FOR 104 | ...Angularly adjustable handle and head (30/89) |
FOR 105 | .Attachments and accessories (30/90) |
| ************** |
| DIGESTS |
| ************** |
DIG 1 | Rechargeable battery operated |
DIG 2 | Dry shavers |
DIG 3 | Envelope openers |
DIG 4 | Explosive |
DIG 5 | Lawn edgers |
DIG 6 | Resilient means |
DIG 7 | Sprinkler and cutter |
DIG 8 | Seam rippers |