1 | MISCELLANEOUS |
2 | ALBUM FASTENERS |
2.5 | GUN BAND TYPE |
3.1 | ARTICLE HOLDER ATTACHABLE TO APPAREL OR BODY |
4 | . Chatelaine safety hooks |
5 | . Flower |
6 | .. Pin attached |
7 | . Napkin |
8 | .. Hook |
9 | .. Neck enclosing |
10R | . Pencil |
11R | .. Clasp attached |
11FE | ... Finger ear, belt attached pencil holder |
11PP | ... Pencil holder with paper clip |
11CC | ... Combined and convertible pencil holder |
11CT | ... Container type pencil holder |
11HC | ... Separate pencil holder and pocket engaging clip |
11S | ... Sliding jaw pencil holding clip |
11C | ... Wire pencil holder |
11F | ... Flexible shank pencil holder |
11M | ... With movable catch (e.g., pin pivoted lever, roller, etc.) |
11P | ... Pivoted jaw pencil holder |
12 | .. Pin attached |
10A | .. Rule holder |
15 | . Sleeve holder (e.g., for inner coat) |
13 | . Pin attached |
3.2 | . Arm or leg carried holder |
3.3 | . Eyeglass holder including retaining means |
3.4 | . Neck supported holder |
3.5 | . Holder contains pocket engager (e.g., antitheft device, wallet protector) |
3.6 | . Key ring holder |
3.7 | . Receptacle type holder |
3.8 | .. Eyeglass or spectacle case |
3.9 | . Open-ended holster type holder |
3.11 | . Article held by clip with spring (e.g., leaf, coil) member |
3.12 | . Article held by clip |
3.13 | . Article held by flexible connector (e.g., chain) |
16R | BALE AND PACKAGE TIES, HOSE CLAMPS |
17R | . Packet holders |
18 | .. Cord |
17A | .. Adjustable bands |
17B | .. Closed loops |
17AP | .. Plastic bands |
19 | . With tighteners |
268 | .. Wedge |
269 | .. Winder |
270 | .. Self-locking (dead center or snap action) |
271 | ... Adjustable girth |
272 | .... Rack bar |
273 | .. Lever |
274R | .. Worm and tooth |
274P | ... Pivotal worm band clamp |
274WB | ... Radial worm band clamp |
275 | .. Integral thread |
276 | ... External thread |
277 | .... Both ends threaded |
278 | .. Radial screw |
279 | .. Tangential screw |
280 | ... Adjustable girth |
281 | .... Step adjustment |
282 | ..... Plural separable parts |
283 | ... Wire |
284 | ... Plural separable parts |
285 | ... Pivotal strap parts |
286 | ... Plural wrap |
20R | . Metal bands |
21 | .. Separate connections |
22 | ... One piece |
23R | .... Sheet metal |
23B | ..... Buckle band connection |
23W | ..... Swedged sheet metal band connection |
23EE | ..... End-to-end integral with band connecting means |
24 | ... Pivoted parts |
25 | ... Wedging parts |
26 | ... Wire |
20CW | .. Circumferentially swagged band clamp |
20EE | .. End-to-end integral band end connection |
20TT | .. Ratchet and tool tightened band clamp |
20S | .. Spring closed band clamp |
20LS | .. Screw locked band clamp |
20W | .. Swedged to lock band ends |
27 | . Wire |
28 | .. Separate connections |
29 | ... Wire |
30 | . Wooden bands |
16PB | . Plastic band |
30.5R | BAG FASTENERS |
30.5W | . Swedged bag tie |
30.5P | . Plastic band bag tie |
30.5S | . Resilient slot bag tie |
30.5T | . Twist-to-close bag tie |
30.5L | . Slides to lock bag end within housing |
31R | BELT FASTENERS |
32 | . Tighteners |
33R | . Hinged |
33A | .. Ring connected belt ends |
33F | .. Bent over flanged ends |
33P | .. Pintle pin connected belt ends |
33V | .. V and round belts |
33L | .. Overlapped belt ends |
33B | .. Sheet metal knuckles, common pintle |
33C | .. Wire knuckles, common pintle |
33K | .. Knuckle integral with belt material |
33M | .. Multiple pintles interconnected V-belt type |
34 | . Lacing |
35 | . One piece |
36 | .. Deflecting prong |
37 | . Screw clamp |
38 | . Splices |
39 | . Wire |
31B | . Butt connected belt ends |
31C | . V, round, trapezoidal belts |
31F | . Flanged belt ends, connector hold ends |
31L | . Lapped ends of endless belts |
31H | . Hinged ends of endless belts |
31W | . Wire strands reinforce belts |
31V | . VELCROR brand fastenerand zipper belt end connection |
40 | BUTTONERS |
41.1 | CUFF HOLDER |
42 | . Adjustable |
43 | . Sleeve clasp and button for cuff |
44 | . Sleeve clasp and clasp for cuff |
45 | . Sleeve clasp and hook for cuff |
46 | . Sleeve clasp and pin for cuff |
47 | . Sleeve pin and button for cuff |
48 | . Pin fastener |
49.1 | NECKTIE FASTENER |
50 | . Bands |
51 | .. End-securing pin |
52 | .. Gripping |
53 | .. Depressors |
54 | ... Button engaging |
55 | ... Pin or spur |
56 | . Button engaging |
57 | .. Adjustable |
58 | .. Cord loop |
59 | .. Pivoted or sliding jaw |
60 | .. Pin attached |
61 | . Collar button combined |
62 | .. Clasp attached |
63 | .. Pin attached |
64 | .. Separable fastener |
65 | . Tie, attached hook |
66.1 | . Magnetic, adhesive, or snap type fastener connects tie to shirt |
66.2 | . Tie engaging loop with shirt engaging fastener |
66.3 | . Tie knot engaging and collar attaching |
66.4 | . Tie clip and shirt clasp attaching |
66.5 | . Tie clip and fastening pin |
66.6 | . Tie pin with shirt fastener |
66.7 | . Tie stiffener with shirt fastener |
66.8 | . With pivotal jaws having spring means |
66.9 | . Slider |
66.11 | . Ornamental |
66.12 | .. Key shaped |
66.13 | . Resilient clasp |
67R | PAPER FASTENER |
67.1 | . With screw threaded or notch engaging securing means |
67.3 | . Resiliently biased |
67.5 | .. Including means to open or close fastener |
67.7 | ... Pivotally mounted on pintle |
67.9 | .. One piece |
67.11 | ... Mounted on support means |
67AR | . Adhesive |
67CF | . Corner fastened |
67P | . Paper-penetrating |
68R | STRAP TIGHTENERS |
69R | . Cam lever and loop |
70R | .. Step adjusted |
70SK | ... Ski boot and garment fasteners |
70T | ... Split ring tightener |
70CT | ... Chain and rope tighteners |
70TT | ... Tire chain tighteners |
70ST | ... Strap tighteners |
70J | ... Jewelry |
69ST | .. Strap tighteners |
69TT | .. Tie chain tighteners |
69CT | .. Cargo tie down |
69CF | .. Cover fasteners |
69T | .. Chain tighteners |
69TM | .. Strap tightener machine |
69TS | .. Toggle actuated sliding jaw |
69J | .. Jewelry |
69AT | .. Split ring with tightener |
69FP | .. Concrete form panels |
69SB | .. Seat belt buckles |
69WT | .. Chain, cable, wire tighteners, and anchors |
69EF | .. Envelope fasteners |
69SK | .. Ski boot and garment fasteners |
71R | . Strap-attached folding lever |
71T | .. Toggle latch |
71ST | .. Strap tightener |
71TT | .. Tire antiskid strap tightener |
71SB | .. Seat belts |
71A | .. Split ring fasteners |
71J | .. Jewelry-watch straps |
71TD | .. Tie downs (covers, articles) |
71CT | .. Cable, wire, rope tightener |
71SK | .. Ski boot and garment fasteners |
71SD | .. Dress hem raisers |
71.1 | . Midline |
68J | . Jewelry |
68SB | . Seat belt |
68AS | . Accordion straps |
68PP | . Parallel poles clamp |
68FP | . Form panels for walls |
68CD | . Cargo tie down |
68CT | . Chain tighteners |
68BT | . Split band with tightener |
68TT | . Tire chain tighteners |
68SK | . Ski, boot, and shoe fasteners |
68A | . Fixed jaw with sliding or pivoted jaw |
68B | . Rack and pinion and circular tighteners |
68C | . Circular flange container clamp |
68D | . Strap stretching tools, tighteners, and sealers |
68E | . Buckle type |
68F | . Integral piece |
68T | . Toggle |
68SC | . Stocking top |
72.1 | TROUSER GUARDS, CLIPS, STRAPS (E.G., ABOVE SHOETOPS) |
72.5 | BEDCLOTHES HOLDERS |
72.7 | T-HEAD NONGRIPPING, FABRIC ENGAGING TYPE |
381 | ZIPPER OR REQUIRED COMPONENT THEREOF |
382 | . Plural zippers |
383 | .. Zipper chain |
384 | .. Having surface sealing structure |
385 | . Having slider or interconnected sliders with access opening for diverse-art-member |
386 | . Plural independently movable sliders |
387 | . With distinct, stationary means for anchoring slider |
388 | .. And for aligning surfaces or obstructing slider movement |
389 | . With distinct member for sealing surfaces |
390 | . With distinct separable-fastener |
391 | . Having coiled or bent continuous wire interlocking surface |
392 | .. With stringer tape interwoven or knitted therewith |
393 | .. With stringer tape having specific weave or knit pattern |
394 | .. With core encircled by coils or bends |
395 | .. With mounting portion having structural formations complementary to stitching |
396 | .. Attached by stitching |
397 | ... String or stringer tape having distinctive property (e.g., heat sensitive) |
398 | .. With stringer tape having distinctive property (e.g., heat sensitive) |
399 | . Having interlocking surface with continuous cross section |
400 | .. Opposed interlocking surface having dissimilar cross section |
401 | . Having interlocking surface formed from single member with varying cross section |
402 | .. Opposed surface having dissimilar cross section |
403 | . Interlocking surface constructed from plural elements in series |
404 | .. Having either noninterlocking element in, interrupted, or unequal length series |
405 | .. With element structural feature unrelated to interlocking or securing portion |
406 | .. Dissimilar opposed elements |
407 | .. Wire element |
408 | .. Preattached to mounting cord |
409 | .. Having interlocking portion with specific shape |
410 | ... Including symmetrical formations on opposite walls for engaging mating elements |
411 | ... Including complementary formations on opposite walls for engaging mating elements |
412 | .... Mating elements having reversed orientation of formations |
413 | .. Having mounting portion with specific shape or structure |
414 | ... Including embracing jaws |
415 | . Slider having specific configuration, construction, adaptation, or material |
416 | .. Including relatively movable spaced wings (i.e., restraining walls) |
417 | .. Including converging channel and relatively movable separator island |
418 | .. Including position locking-means attached thereto |
419 | ... Protrusion on pull tab directly engaging interlocking surfaces |
420 | ... Having surface engaging element shifted by reorientation of pull tab |
421 | .... Resilient or spring biased element |
422 | ..... Selectively shifted by either of two pull tabs |
423 | ..... With relatively movable link |
424 | ..... Biased by distinct spring |
425 | ..... Having aperture cooperating with guide post |
426 | .. Including means preventing bunching of structure-to-be-secured or stringer |
427 | .. Having specific contour or arrangement of converging channel, separator island, or wing |
428 | ... Spaced segments of each wall of channel supported by different wings |
429 | .. Including pull tab attaching means |
430 | .. Including means for attaching components of slider together |
431 | .. With ornamental slider |
432 | . With means for concealing surfaces |
433 | . Including complementary, aligning means attached to ends of interlocking surfaces |
434 | .. Having specific mounting connection or reinforcing structure at connection |
435 | . Including means attaching interlocking surfaces together |
436 | . Including means for obstructing movement of slider |
437 | SLIT CLOSING MEANS INCLUDING GUIDES ON OPPOSITE EDGES OF SLIT AND SLIDABLE BRIDGING COMPONENT |
438 | . With hand-actuated lever for shifting bridging component |
439 | . Including structure linking and allowing variations in separation between opposite-guide-contacting portions of component |
440 | . Having bridging components attached in series along carrying element |
441 | . Having separate, independently movable, bridging components |
442 | INCLUDING READILY DISSOCIABLE FASTENER HAVING NUMEROUS, PROTRUDING, UNITARY FILAMENTS RANDOMLY INTERLOCKING WITH, AND SIMULTANEOUSLY MOVING TOWARDS, MATING STRUCTURE (E.G., "VELCRO") |
306 | . Combined with diverse fastener |
443 | . With distinct structure for sealing securement joint |
444 | . With feature facilitating, enhancing, or causing attachment of filament mounting surface to support therefor |
445 | . Having filaments formed from continuous element interwoven or knitted into distinct, mounting surface fabric |
446 | . Having filaments of varied shape or size on same mounting surface |
447 | . With feature facilitating or causing attachment of filaments to mounting surface |
448 | .. Thermal or adhesive |
449 | . Having several, repeating, interlocking formations along length of filaments |
450 | . Having opposed structure formed from distinct filaments of diverse shape to those mating therewith |
451 | . Having filaments constructed from coated, laminated, or composite material |
452 | . Having mounting surface and filaments constructed from common piece of material |
287 | FREIGHT CONTAINER TO FREIGHT CONTAINER FASTENER |
288 | DRUM OR CAN SPACER FASTENER |
289 | TRIM MOLDING FASTENER |
290 | . Having externally threaded attaching means |
291 | .. And laterally extending biasing appendage |
292 | . Having laterally extending biasing appendage |
293 | . Resilient metal type |
294 | .. Strip formed |
295 | .. Sheet metal formed |
296 | .. Wire formed |
297 | . Plastic type |
298 | PLURAL FASTENERS HAVING INTERMEDIATE FLACCID CONNECTOR |
299 | . Chain connector |
300 | . Elastic connector |
301 | .. Strap connector |
302 | . Strap connector |
303 | HAVING MAGNETIC FASTENER |
304 | HAVING ADHESIVE FASTENER |
305 | COMBINED DIVERSE MULTIPART FASTENERS |
307 | . Buckle |
308 | .. And buckles |
309 | ... Having separate material adjustment means |
310 | ... Having separate disconnect means |
311 | .... Pivotal lever type |
312 | ... Having disconnect structure |
313 | .... Resilient cooperating means |
314 | ... And pin |
315 | ... Crossed belt accommodating |
316 | .. And clasp |
317 | .. And pin |
318 | .. And hook |
319 | ... Having disconnect means |
320 | ... Having penetrating prong |
321 | ... Buckle having plural receiving slots |
322.1 | .. Including a button fastening element |
323 | .. And separable fastening means for attached fastener |
324 | ... Snap fastener |
325 | .. Having roller means |
326 | . Clasp |
327 | .. Having pivoted members |
328 | ... Cam type member |
329 | ... Plural clasps |
330 | .... And toggle operator |
331 | .... Spring biased |
332 | ..... Coil |
333 | .... And cam |
334 | ... Coil spring biased |
335 | .. Plural clasps |
336 | ... Resilient type clasp |
337 | .... And cam |
338 | .... Spring biased jaw |
339 | .... Circular work engageable |
340 | .... And pin attachment |
341 | .... And disconnect means |
342.1 | .. Including a button fastening element |
343 | .. And hook |
344 | ... Having intermediate connector allowing movement |
345 | .... And adjustment means |
346 | ... Having gripping configuration on clasp jaw |
347 | .... Penetrating type |
348 | ... Having cam |
349 | ... Having separable jaws |
350 | .. And penetrating prong |
351 | .. And pin |
352 | ... Having separate pin loss prevention means |
353 | .... Pin coextensive, coplanar, and contiguous with clasp jaw |
354 | ... Pin coextensive, coplanar, and contiguous with clasp jaw |
355 | ... Pin forms part of clasp jaw |
356 | . Pin |
357 | .. And pin |
358 | ... And disconnect means |
359 | .... Hook and eye type |
360 | ... And hook |
361 | .... Having connector allowing movement |
362 | ... Having intermediate connector allowing movement |
363 | .. And hook |
364 | ... Having intermediate connector allowing movement |
365 | .... And adjustment means |
366 | ... Hook having locking means |
367.1 | .. Including a button fastening element |
368 | .. And penetrating prong |
369 | . Hook |
370 | .. And hook |
371 | ... Having biasing spring |
372 | ... Separately connected |
373 | ... Having securing means |
374 | .... Sliding |
375 | .... Snap type |
376 | .... Pivoted |
377 | .. Having penetrating prong |
378.1 | .. Including a button fastening element |
379.1 | . Button fastening element including another fastener element |
380 | . Penetrating prong |
89 | INTERCHANGEABLE BUTTON LOOP AND PIN |
90.1 | BUTTON WITH FASTENER |
90.5 | . Loss-preventing devices |
91 | . Adjustable |
92 | . Cloth shanks and covers |
93 | . Multiple attachment |
94 | . Deflecting prong or rivet |
95 | .. Anvil or plate |
96 | .. Integral |
97 | . Hinged leaf |
98 | .. Axially rotating |
99 | .. Double |
100 | .. Sliding |
100.5 | . Sliding bar |
101R | . Integral or rigid stud |
101B | .. Bent sheet metal (integral) |
102R | . Link |
102A | .. Integral rubber button, extendable shank |
102E | .. Extendably connected |
102PL | .. Pivoted leaf |
102SL | .. Releasably locked |
102FC | .. French cuff |
102T | .. Tufting |
102P | .. Integral piece |
103 | . Pin attached |
104 | . Separable |
105 | .. Screw |
106 | .. Spring |
107 | ... Resilient head |
108 | ... Resilient socket |
109 | ... Rotating head |
110 | ... With operating devices |
111 | . Separate thread bar |
112 | . Spiral fastener |
113R | . Covers |
113MP | .. Metal or plastic caps |
114 | . Pads |
114.1 | . Flexible button |
114.2 | . Swivel button |
114.3 | . Tufting type |
114.4 | . Button with cavity for friction grip fastener |
114.05 | . Button with shank for friction grip fastener |
114.6 | . Heat or adhesive secured type |
114.7 | . Thread or wire through apertured button |
114.8 | . Eye shank type button |
114.9 | . Ornamental type |
114.11 | . For cuff or collar |
114.12 | . Fabric embracing |
712 | DRAWSTRING, LACED-FASTENER, OR SEPARATE ESSENTIAL COOPERATING DEVICE THEREFOR |
712.1 | . Includes separate device for holding drawn portion of lacing |
712.2 | .. Device engages tie in lacing |
712.3 | ... And fully covers tie |
712.4 | .. Device engages element or formation on lacing |
712.5 | .. Having relatively movable holding components or surfaces |
712.6 | ... With pivotal connection therebetween |
712.7 | ... With integral resilient linking structure therebetween |
712.8 | .... Formed from wire |
712.9 | .. Having lacing wound thereabout or wedged therein |
713 | . With holding means fixedly mounted on lacing |
713.1 | .. And forming lacing tips |
713.2 | . Includes lacing holding structure within directing means therefor |
713.3 | . Having diverse shaped directing means for lacing |
713.4 | . Having lacing directing means in particular pattern |
713.5 | . Includes lacing guiding roller within directing means |
713.6 | . Having eyelet type directing means |
713.7 | .. With permanently deformed mounting structure |
713.8 | ... Mounting structure formed from different material than directing passage |
713.9 | . Having hook shaped directing means |
714 | .. And movable component or surface for closing throat |
714.1 | .. Mounted by structure allowing bodily movement thereof |
714.2 | .. Formed from wire |
714.3 | .. With mounting structure formed from different material |
714.4 | .. With permanently deformed mounting structure |
714.5 | ... Expanding stud |
714.6 | . Having loop or sleeve shaped directing means |
714.7 | .. Entirely formed from flaccid material |
714.8 | .. Mounted by structure allowing bodily movement thereof |
714.9 | .. Formed from wire |
715 | .. With permanently deformed mounting structure |
715.1 | ... Loop or sleeve closed when mounted |
715.2 | ... Expanding stud |
715.3 | . Having elastic segment in lacing |
715.4 | . Having means covering tip of lacing |
715.5 | .. Tasseled |
715.6 | .. With plural components |
715.7 | .. With permanently deformed mounting structure |
114.5 | STRAP CABLE OR PIPE BUTTON |
115R | CORD AND ROPE HOLDERS |
116R | . Chain |
116A | .. Bead chain fasteners |
122.3 | . Sheathed strand |
122.6 | . Plural-strand cord or rope |
127 | . Friction disk |
128 | . Knot engaging |
129R | . One-piece |
130 | .. Wedge slot |
131R | .. Wire |
131C | ... Cord runs through center of coil |
129B | .. Sheet material |
129A | .. Slack adjuster |
129D | .. Rubber |
129C | .. Wire |
129W | .. Swagged, deformable |
132R | . Pivoted part |
133 | .. Lever tension |
134R | .. Cam lever |
134KA | ... Laterally shifted rope |
134KB | ... Cam engaging or disengaging |
134L | ... Fixed and movable jaws, movable jaw pulled |
134N | ... Link-connected parallel jaws |
134P | ... Dual cam |
132AA | .. Pivotal means with plate aperture |
132WL | .. Jaws locked together by cam, wedge, lever, or screw |
135R | . Screw clamp |
135A | .. Screw clamp with snubber |
135K | .. Tangential bolt |
135L | .. J-shaped bolt |
135N | .. Bolt perpendicular to cable axis |
136R | . Sliding part or wedge |
136K | .. Rope looped about movable member |
136L | .. Rope clamped between cone and socket |
136A | .. Sliding ball |
136B | .. Screw actuated |
115A | . Bendable, ductible |
115F | . Safety release |
115G | . Alignable aperture and spring pressed moving element |
115H | . Loop, adjustable |
115J | . Snubbers, cleats by dielectric loss |
115K | . Loop engaging |
115L | . Ball or roller |
115M | . Sliding wedge |
115N | . Helical preform |
163R | BUCKLES |
164 | . Harness |
165 | .. Combined buckles and snap hooks |
166 | .. Lock |
167 | ... Key |
168 | .. Clamping |
169 | ... One-piece |
170 | ... Pivoted part or lever |
171 | ... Sliding part or wedge |
172 | .. Cross bails |
173 | ... Pivoted stud plate |
174 | ... Rigid stud |
.. Penetrating tongue | |
175 | ... Guarded |
176 | ... One-piece |
177 | ... Multiple |
178 | ... Pivoted |
179 | .... Lever actuated |
180 | .... Stud |
181 | ... Sliding part or wedge |
182 | .. Strap loops and attaching devices |
183 | .. Loop shields |
184 | . Garment shielded |
. Combined pressure bar and guard | |
185 | .. Hook attached |
. Penetrating prong | |
186 | .. One-piece |
187 | ... Hook attached |
188 | .. Pivoted |
189 | ... Hook attached |
190 | .. Slide |
191 | . Pivoted lever |
192 | .. Hook attached |
193 | .. Looped strap |
194 | . Sliding part of wedge |
195 | .. Hook attached |
196 | .. Looped strap |
197 | . Looped strap |
198 | . One-piece |
199 | .. Hook attached |
200 | .. Looped strap |
163FC | . Fabric covered |
163K | . Ornamental and/or object supported |
705 | PIERCED EARRING FASTENER |
453 | INDEPENDENT, HEADED, APERTURE PASS-THROUGH FASTENER |
454 | FASTENER WITH REVOLVING COMPONENT WRAPPING STRUCTURE-TO-BE-SECURED ABOUT FASTENER |
455 | CLASP, CLIP, SUPPORT-CLAMP, OR REQUIRED COMPONENT THEREOF |
456 | . Gripping member adapted for tool actuation or release |
457 | . With specific mounting means for attaching to rigid or semirigid supporting structure or structure-to-be-secured |
458 | .. For cooperating with aperture in supporting structure or structure-to-be-secured |
459 | . Dissociable gripping members |
460 | .. Channel and inserted bar |
461 | ... Having operator or locking means |
462 | ... Resilient channel or bar |
463 | . Having gripping member actuated by fluid force |
464 | . Having inserted and receiving interlocking members connected by bendable, nonbiasing strap |
465 | .. Discrete flaccid strap |
466 | ... With distinct means for preventing separation of members |
467 | .... Slidably mounted |
468 | ... With separate flaccid flap or pocket for protecting structure-to-be-secured |
469 | ... With separate, cavity-blocking gate on receiving member |
470 | ... Resilient inserted or receiving member |
471 | .... Inserted or receiving member substantially covered or coated for protection or to promote gripping |
472 | .... Resilient inserted member |
473 | ..... Having engaging face formed from nonmetallic material |
474 | ...... Having head and neck type engaging face |
475 | ....... Having internal supporting or reinforcing element |
476 | ........ Circular head or neck |
477 | ... Having wedge shaped, inserted and receiving members |
478 | ... With specific means for attaching to flaccid strap or supporting strap |
479 | .... On the inserted member |
480 | ... Having necked button sliding along length of closed, variable width loop |
481 | . Having flaccid gripping member |
482 | .. Formed from elastic material |
483 | . Encircling gripping member including semirigid band and operator for tightening |
484 | . Encircling gripping member including semirigid band and means for adjusting girth |
485 | . With specifically shaped, nongripping, rigid structure for connecting independently operable clasps, clips, or support-clamps |
486 | . Gripping member face integral with or rigidly affixed to screw-driving portion |
487 | . Having either discrete flaccid or thin, nonbiasing, integral, connecting hinge |
488 | . Having equally spaced or continual gripping faces revolving about central axis |
489 | . Including pivoted gripping member |
490 | .. Pivoted member also slides |
491 | ... Tapered face |
492 | .. Pivoting gripping member either supports or coacts with sliding engaging face |
493 | .. Having three or more pivotally connected gripping members |
494 | .. Having toggle operator for moving |
495 | .. Having rigid linking arm pivotally connected to each gripping member |
496 | ... With extended lever portion |
497 | .... Having lever end modified for attachment to support |
498 | .. Pivoted gripping member applies camming force |
499 | .. Spring or resiliently biased about pivot |
500 | ... Distinct spring |
501 | .... Attached solely by spring |
502 | .... With operator for moving pivoted member |
503 | ..... Camming or wedging element |
504 | ...... Pivoted or rotated element |
505 | .... With position locking-means for gripping members |
506 | ..... Including pivoted arm |
507 | .... Having specific surface material or irregularity on or along engaging face |
508 | .... Having specific handle structure |
509 | .... Coil spring |
510 | ..... Having coil portion coaxial or parallel with pivotal axis |
511 | .... Flat or leaf spring |
512 | .. Closed by gravity or weight of structure-to-be-secured |
513 | .. With operator means for moving pivoted member |
514 | ... Threaded cylindrical rod and mating cavity |
515 | ... Camming or wedging element |
516 | .... Pivoted or rotated element |
517 | .. With position locking-means for gripping members |
518 | ... Integral locking-means |
519 | .. Having inserted and receiving interlocking engaging faces |
520 | ... Resilient gripping member |
521 | .. Having specific surface material or irregularity on or along engaging face |
522 | . Including track or way guided and retained gripping member |
523 | .. Biased by distinct spring |
524 | .. With operator for moving guided member |
525 | ... Threaded cylindrical rod and mating cavity |
526 | .. Track or way oblique to path of gripping member |
527 | .. With position locking-means for gripping members |
528 | ... Integral locking-means |
529 | .. With specific mounting means for attaching to flaccid supporting structure or structure-to-be-secured |
530 | . Having gripping member formed from, biased by, or mounted on, resilient member |
531 | .. Integrally combined, independently operable, diverse clasps, clips, or support-clamps |
532 | .. With specific means for mounting to flaccid supporting structure or structure-to-be-secured |
533 | ... Mounting means made entirely from integral wire portion of resilient gripping member |
534 | .... Wire coiled about flaccid support structure |
535 | .. With operator for moving biased engaging face |
536 | ... Camming or wedging element |
537 | .... Encircling sleeve type element |
538 | .... Pivoted or rotated element |
539 | ..... Element pivots or rotates in plane parallel to plane bisecting opposed engaging faces |
540 | ..... Elongated element with pivot between cam and handle portions |
541 | ...... For moving engaging face of U-shaped gripping member |
542 | .. With position locking-means for engaging faces |
543 | ... Integral locking-means |
544 | ... Pivoted lock member |
545 | .. Opposed engaging faces on gripping member formed from single piece of resilient material |
546 | ... Piece totally forms clasp, clip, or support-clamp and has shaped, wirelike, or bandlike configuration with uniform cross section throughout its length |
547 | .... Opposed faces located in and bias towards common plane in nonuse position |
548 | .... Resilient gripping member having tightly twisted portion |
549 | .... Resilient gripping member having coiled portion |
550 | ..... Convolutions of coil form faces |
551 | .... Relatively movable segments of resilient gripping member contact and cross in nonuse position |
552 | ..... Segments form opposed engaging faces |
553 | ...... Having specific handle structure |
554 | ..... Having specific handle structure |
555 | .... Terminal end of resilient member having engagement or disengagement enhancing structural modifications |
556 | .... Having specific surface irregularity on or along engaging face |
557 | ... Having specific handle structure |
558 | .... Movably attached to gripping member |
559 | ... Interlocking faces |
560 | ... With reinforcing member |
561 | ... Having specific surface irregularity on or along engaging face |
562 | .... Corrugated or toothed face |
563 | ... Clasp, clip, or support-clamp cut or shaped from a single sheet of resilient, uniformly thick, planar material |
564 | .. Having specific surface material or irregularity on or along engaging face |
565 | .. Having specific handle structure |
566 | .. Including resilient biasing wire |
567 | ... Coiled wire |
568 | . Having gripping member shifted by operator |
569 | .. Threaded cylindrical rod and mating cavity |
570 | . Formed from single rigid piece of material |
571 | .. Having specific surface irregularity on or along engaging face |
572.1 | SEPARABLE-FASTENER OR REQUIRED COMPONENT THEREOF (E.G., PROJECTION AND CAVITY TO COMPLETE INTERLOCK) |
573.09 | . With third detached member completing interlock (e.g., hook type) |
573.11 | .. Quick connect or release (e.g., spring and detent) |
574.1 | .. For jewelry |
575.1 | .. Including eyelet (e.g., shoes) |
576.1 | .. For key holder |
577.1 | .. For tire chain, strap, etc. (e.g., rotatable or sliding spring gate) |
578.1 | .. For apparel and related accessories |
578.11 | ... Button, button related |
578.12 | .... Snap (e.g., key hole type) |
578.13 | ... Post and receiver(e.g., pin and slot) |
578.14 | ... Hook (e.g., within cavity) |
578.15 | ... Belt, strap, etc. (e.g., buckle or snap fastener) |
578.16 | ... Glove |
578.17 | ... Purse, wallet, etc. |
579.09 | .. Belt, strap, harness, etc. |
579.11 | ... For safety belt buckle, strap, harness, etc. |
580.1 | .. Sliding or rotating element |
580.11 | ... Element having key slot |
581.1 | .. Resilient element (e.g., snap type) |
581.11 | ... For upholstery, panel, trim strip, etc. (e.g., spring biased) |
581.12 | ... Link with pivoted gate |
582.1 | .. Hook |
582.11 | ... Snap with spring bias (e.g., gate) |
582.12 | ... For connecting chains (e.g., opposed pivoted hook) |
582.13 | ... For heavy load bearing device (e.g., chain, rope, cable, etc.) |
582.14 | .... Haim, harness, whiffletree, rein, etc. |
583.1 | .. For chain, rope, cable, etc. |
583.11 | ... Coupler with sliding socket to complete interlock |
584.1 | . Each mating member having similarly shaped, sized, and operated interlocking or intermeshable face |
585.1 | .. Zipper-type (e.g., slider) |
585.11 | ... For garment (e.g., with ribs and grooves interlocking elements) |
585.12 | ... For container (e.g., bag) |
586.1 | .. Resilient element |
586.11 | ... Snap (e.g., identical elements) |
587.1 | .. Clasp (e.g., spring type) |
587.11 | ... For jewelry (e.g., buckle type) |
587.12 | ... For belt or strap |
588.1 | .. Hook |
588.11 | ... For belt, strap, etc. (e.g., with pivoted gate locking member) |
588.12 | ... For apparel |
589.1 | .. Slot and tab or tongue |
590.1 | .. Sliding or rotating element |
591.1 | . Including member having distinct formations and mating member selectively interlocking therewith |
592.1 | .. Hook |
592.11 | ... Multiple catch (e.g., with pivoted gate) |
593.1 | .. Slot and tab or tongue |
593.11 | ... Having teeth or serrations (e.g., sliding with respect to each other) |
594.1 | .. Resilient element (e.g., with spring) |
594.11 | ... Snap with cavity |
595.1 | .. Pin, post and receiver |
596.1 | .. Notched clasp (e.g., with receiving slot) |
598.1 | .. Projection passes through cavity then moves toward noninserted portion of its member to complete interlock (e.g., snap hook) |
598.2 | ... Entire projection member forms loop or ring when interlocked |
598.3 | .... Includes slidable gate closing entrance throat |
598.4 | ... Hook type projection member |
598.5 | .... Plural hooks entering opposite sides of same cavity |
598.6 | ..... Hooks formed solely from wire |
598.7 | .... Noninserted portion of projection member includes movably connected gate for closing access throat |
598.8 | ..... Threaded gate |
598.9 | ..... Revolvably mounted disc shaped gate |
599.1 | ..... Pivotally connected gate |
599.2 | ...... Gate swings transversely to plane of hook |
599.3 | ...... Gate also slides relative to pivot |
599.4 | ...... Having means biasing gate about pivot |
599.5 | ....... And position locking-means for gate |
599.6 | ....... Includes distinct biasing spring |
599.7 | ........ Coil type spring |
599.8 | ......... Coiled about pivotal axis of gate |
599.9 | ...... Having position locking-means for gate |
600.1 | ....... Locking-means pivotally connected |
600.2 | ....... Locking-means slidably mounted |
600.3 | ...... Gate closes when structure-to-be-secured is tensioned |
600.4 | ..... Track or way guided gate |
600.5 | ...... Having means biasing gate |
600.6 | ....... Guide of gate encircles shank |
600.7 | ....... Cavity in shank forms track or way |
600.8 | ........ With position locking-means for gate |
600.9 | ..... Resilient, self-biased gate |
601.1 | ...... With position locking-means for gate |
601.2 | ...... Gate and hook formed from plastic |
601.3 | ...... Gate and hook formed solely from wire |
601.4 | ...... Gate and hook formed from single piece of sheet metal |
601.5 | .... Projection pivotally attached to shank or mounting structure |
601.6 | .... Projection slidably mounted to shank or mounting structure |
601.7 | .... Projection self-biased towards shank or mounting structure |
601.8 | ..... And formed solely from wire |
601.9 | ...... Cooperating with relatively stationary wire gate |
602 | .. Interlocking portion actuated or released responsive to preselected condition (e.g., heat, pressure) |
603 | .. Having electric or fluid powered, actuation or release, of interlock |
604 | .. Projection having movable connection between components thereof or variable configuration |
605 | ... With additional, similar projection for engaging different cavity |
606 | ... And operator therefor |
607 | .... Including camming or wedging element on projection member |
608 | ..... Pivotally attached element |
609 | ... Including pivotal connection between projection components |
610 | .... Component slides relative to connection |
611 | .... And spring or resilient extension biasing about pivot |
612 | ... Including slidably guided connection between nonself-biasing projection components |
613 | .... And distinct spring biasing component |
614 | ... Including resiliently biased projection component or surface segment |
615 | .... Requiring manual force applied against bias to interlock or disengage |
616 | ..... Having connected leading edge and separated trailing arms |
617 | .... Cooperating with cavity having side walls and axially biased component capping end |
618 | .... Forming total external surface of projection |
619 | ..... And encircling hollow central area |
620 | ...... Having separate mounting means inserted into area |
621 | ....... Plastic deformation of means or surface required for mounting |
622 | ...... Having separate mounting means encompassing cross section of projection |
623 | ...... Having dome-shaped head and expansion slit along side |
624 | ....... And connected surface at tip of head |
625 | ..... Having inserted end formed by oppositely biased surface segments |
626 | ..... Constructed from wire |
627 | .... Having both resiliently biased and rigid components forming external surface of projection |
628 | .. Projection member including noninserted spring for engaging and pushing against receiving member |
629 | .. Receiving member includes either movable connection between interlocking components or variable configuration cavity |
630 | ... With additional cavity for engaging different projection |
631 | .... Having common means actuating or releasing interlocking components or surfaces |
632 | ..... And interlocking with independently associated or dissociated projection members |
633 | ... And operator therefor |
634 | .... For plural, oppositely shifting, similar interlocking components or segments |
635 | ..... Operator includes camming or wedging element |
636 | .... Including pivotally connected element on receiving member |
637 | ..... For shifting pivotally connected interlocking component |
638 | ...... Element and component pivot about same axis |
639 | ..... For shifting slidably connected and guided, nonself-biasing interlocking component |
640 | .... Including slidably connected and guided element on receiving member |
641 | ..... For shifting pivotally connected interlocking component |
642 | ..... For shifting slidably connected and guided, nonself-biasing, interlocking component |
643 | ... Having pivotally connected interlocking component |
644 | .... Blocking removal of formation on projection from complementary formation on side wall of cavity |
645 | .... And position locking-means therefor |
646 | .... And relatively movable handle therefor |
647 | .... Requiring manual force thereon to interlock or disengage |
648 | ..... Plural, oppositely shifting, similar interlocking components |
649 | ..... Having aperture therein alignable with parallel access opening |
650 | ..... Having interlocking portion thereof housed continuously within cavity |
651 | ... Having cavity with side walls and axially biased component capping end |
652 | ... Having slidably connected, nonself-biasing interlocking component |
653 | .... Blocking removal of formation on projection from complementary formation on side wall of cavity |
654 | .... And position locking-means therefor |
655 | .... And relatively movable handle therefor |
656 | .... Requiring manual force thereon to interlock or disengage |
657 | ..... Plural, oppositely shifting, similar interlocking components |
658 | ..... Having closed aperture therethrough alignable with parallel access opening |
659 | ... Having flaccid component defining access opening of cavity |
660 | .... Component formed solely by flaccid cord |
661 | .... With nonflaccid component |
662 | ... Having resiliently biased interlocking component or segment |
663 | .... Cavity or projection rotates about axis of cavity to dissociate |
664 | .... Requiring manual force applied against bias to interlock or disengage |
665 | ..... And partially blocking separate, nonresilient access opening of cavity |
666 | .... And closed elongated access opening for guiding transverse projection travel after insertion |
667 | ..... Nonresilient walls define opening |
668 | ..... Formed from wire |
669 | .... And access opening with gapped perimeter for allowing movement of noninserted projection support therepast |
670 | ..... Cavity constructed solely from wire |
671 | .... Partially blocking separate, nonresilient, access opening of cavity |
672 | ..... And bodily shifted into or out of interlock location by manual force thereon |
673 | ..... Formed from wire |
674 | ...... Having curved or bent engaging section conforming to contour of projection |
675 | ....... Similar, distinct sections |
676 | ...... Having distinct sections engaging projection at spaced points |
677 | .... Including separate, nonprojection-engaging spring for biasing |
678 | .... Biased component or segment entirely formed from wire |
679 | .... Having portion of cavity deformed during mounting |
680 | ..... And cooperating with separate mounting component |
681 | .... Having axially extending expansion slit along side of cavity |
682.1 | .. Means for mounting projection or cavity portion |
683 | ... Allows bodily movement facilitating interlock |
684 | .... About pivotal connection |
685 | .... Includes resilient component separate from portion |
686 | ... Allows relocation of portion |
687 | ... Having component of means permanently deformed during mounting operation |
688 | .... And formed from or fixedly attached to projection or cavity portion |
689 | ..... Cooperates with detached component of means |
690 | ..... Having shape facilitating impaling of mounting surface |
691 | .... And inserted into or through cavity or projection |
692 | .... And encircling cavity or projection |
693 | ... Consisting of thermally fusible substance |
694 | ... Having threaded formation |
695 | ... Having specific structure for cooperating with stitching |
696 | ... Having shape facilitating impaling of mounting surface |
697.1 | .. Plural distinct cavities or projections |
697.2 | ... Hook type |
698.1 | .. Hook-shaped projection member passing through cavity |
698.2 | ... Formed from single piece of sheet metal |
698.3 | ... Formed solely from wire |
700 | .. Cavity having specific shape |
701 | ... Including closed elongated access opening for guiding transverse projection travel after insertion |
702 | ... Having access opening with gapped perimeter for allowing movement of noninserted projection support therepast |
706 | PIN OR SEPARATE ESSENTIAL COOPERATING DEVICE THEREFOR |
706.1 | . With separately operable, manually releasable, nonpenetrating means for mounting (e.g., drapery hook) |
706.2 | . Having distinct guiding, holding, or protecting means for penetrated portion |
706.3 | .. Means detachable from or flaccidly connected to pin (e.g., hatpin type) |
706.4 | ... For pin having plural penetrating portions |
706.5 | ... Including relatively movable guiding, holding, or protecting components or surfaces |
706.6 | .... Having operator for moving holding component or surface |
706.7 | ..... Moves pivoting holding component |
706.8 | ..... Moves slidably guided, nonself-biasing, holding component |
706.9 | .... Having pierceable (e.g., cork) or naturally resilient (e.g., rubber) surfaces |
707 | .... With pivotal connection therebetween |
707.1 | .... With slidable connection between nonself-biasing components |
707.2 | .... Having resiliently biased component or surface |
707.3 | ..... Coiled about longitudinal axis of held portion |
707.4 | ..... And aperture therein alignable with another spaced aperture of means |
707.5 | ..... And nonresilient structure for guiding portion thereto |
707.6 | ... Including structure for cooperating with formation (e.g., cavity) formed on penetrating portion |
707.7 | .. For pin having plural penetrating portions |
707.8 | ... Each independently movable towards and into cooperation with means |
707.9 | .. Including relatively movable guiding, holding, or protecting components or surfaces |
708 | ... With connection allowing component to revolve about axis of held penetrating portion |
708.1 | ... With pivotal connection therebetween |
708.2 | .... Having position locking means therefor |
708.3 | .... Spring or resiliently biased |
708.4 | ... With slidable connection between nonself-biasing components |
708.5 | .... Component slides parallel to axis of held penetrating portion |
708.6 | ... Means engages formation formed on penetrating portion |
708.7 | ... Having nonresilient and resilient components |
708.8 | ... Means formed from single resilient wire |
708.9 | ... Means formed from resilient sheet metal |
709 | .. With independent, spaced, intermediate connections, or formations (e.g., coils), about which portion or means move |
709.1 | ... Includes slidable connection |
709.2 | .. With pivotal connection between penetrating portion and means |
709.3 | ... Connection also permits sliding movement |
709.4 | ... Resiliently biased about connection |
709.5 | .. With slidable connection intermediate penetrating portion and means |
709.6 | .. Having resilient bridging structure between portion and means |
709.7 | ... Means includes structure for cooperating with formation (e.g., cavity) formed on portion |
709.8 | ... And penetrating portion formed from wire |
709.9 | .... Bridging structure includes elongated nonwire element |
710 | .... Wire also forms coiled bridging structure about which portion moves |
710.1 | ..... Including distinct device for cooperating with coil |
710.2 | ..... Having means also formed from same wire |
710.3 | . With cavity for guiding structure-to-be-secured towards penetrating portion (e.g., stocking support) |
710.4 | . Having penetrating portion retractable or of changeable length |
710.5 | . Having interconnected distinct penetrating portions |
710.6 | .. Connection allows movement therebetween |
710.7 | ... Slidable connection |
710.8 | ... Resilient connection |
710.9 | .. Formed from common wire |
711 | ... And pointing in same direction |
711.1 | . Penetrating portion includes relatively movable structure for resisting extraction |
711.2 | . Having specific wire penetrating portion |
711.3 | .. Wire curved or bent |
711.4 | . Having distinct head structure |
711.5 | .. Movably connected to penetrating portion |
265R | STRAP-END-ATTACHING DEVICES |
265A | . Bendable sheet material |
265B | . Watch pintle connected |
265C | . Webbing to tube (lawn chair) |
265BC | . Buckle connected |
265EC | . End clasp |
265H | . Hook |
265AL | . Ring-loop |
265CD | . Cargo tiedown |
265WS | . Watch strap |
265EE | . Enlarged end epoxy |
267 | PIVOTED EDGE STAYS |
703.1 | FASTENER DESTRUCTIVELY SECURED BY RESHAPING DISTORTION FORCE (E.G., DUCTILE FASTENER) |
703.2 | . Distorted structure having shape facilitating impaling |
703.3 | .. And distinct fastener structure cooperating with impaled structure |
703.4 | ... Detached cooperating structure |
703.5 | .. Including plural impaling elements |
703.6 | ... Elements form single aperture (e.g., split shank type) |
704.1 | READILY INTERLOCKING, TWO-PART FASTENER REQUIRING EITHER DESTRUCTIVE OR TOOL DISENGAGEMENT |
704.2 | . Including additional fastener structure linking parts |
716 | HANGER ON PORTABLE ARTICLE SUPPORT FOR MANUAL ATTACHMENT THEREOF TO OVERHEAD SUPPORT (E.G., DRAPERY HOOK) |
CROSS-REFERENCE ART COLLECTIONS | |
900.1 | SHIRT COLLAR HOLDERS |
901 | PENETRATING-TYPE PAPER FASTENER |
902 | TUFTING BUTTON FASTENER |
903 | ARMPIT SHIELD FASTENER |
904 | GLOVE FASTENER |
905 | WATCH CHAIN FASTENER (E.G., SWIVEL HOOK) |
906 | FASTENER FOR ATTACHING BAND TO WATCH OR SIMILAR ARTICLE (E.G., NAME PLATE) |
907 | PLASTIC HOOK |
908 | FISHLINE SUPPORTED ATTACHMENT HOOK |
909 | WINDERS FOR FLEXIBLE MATERIAL |
910 | ONE-PIECE |
FOREIGN ART COLLECTIONS | |
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
Any foreign patents non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collection listed below. These collections contain ONLY foreign patents or non-patent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived. | |
FOR100 | SEPARABLE-FASTENER OR REQUIRED COMPONENT THEREOF (24/572) |
FOR101 | . With third, detached member completing interlock (24/573.1) |
FOR102 | .. And linking cavities in adjacent parallel panels (24/573.2) |
FOR103 | .. Third member includes independently engaged hooks for linking spaced cavities (24/573.3) |
FOR104 | ... And movably connected, noninserted gate for closing access throat of hook (24/573.4) |
FOR105 | .. Third member includes relatively movable, separate components (24/373.5) |
FOR106 | ... For parachute harness (24/573.6) |
FOR107 | .. Third member consists of unitary elongated element (24/573.7) |
FOR108 | . Each mating member having similarly shaped, sized, and operated interlocking face (24/575) |
FOR109 | .. Including elongated face having identical, parallel cross sections throughout its length (24/576) |
FOR110 | .. Including elongated face having varying, parallel cross sections throughout its length (24/577) |
FOR111 | .. Including complementary shaped and alternately useable interlocking faces (24/578) |
FOR112 | .. Single piece hook-shaped member (e.g., mating garment hooks) (24/579.1) |
FOR113 | . Including member having distinct formations and mating member selectively interlocking therewith (24/580) |
FOR114 | .. Formations positioned along wall forming mating-member-guiding cavity (24/581) |
FOR115 | ... Formations member having movably attached or biased interlocking structure (24/582) |
FOR116 | .. Formations member having movably attached or biased interlocking structure (24/583) |
FOR117 | .. Selectively interlocking member having movably attached or biased interlocking component (24/584) |
FOR118 | ... And cavity for guiding movement of formations (24/585) |
FOR119 | .. Having mounting means allowing repositioning of member for facilitating interlock (24/586) |
FOR120 | . Including member having elongated, resilient, interlocking face with identical, parallel cross-sections throughout its length (24/587) |
FOR121 | . Including receiving member having cavity and mating member having insertable projection guided to interlock thereby (24/588) |
FOR122 | .. Having divergent interlock means distinct from cavity or projection of its member (24/589) |
FOR123 | .. Projection or cavity rotates about axis of cavity access opening to interlock (24/590) |
FOR124 | ... Having projection rotatably connected to its member (24/591) |
FOR125 | .... And operator therefor (24/592) |
FOR126 | .... And position locking-means therefor (24/593) |
FOR127 | ..... Including notch or hump on projection axially biased by spring (24/594) |
FOR128 | ..... Including radially biased element engaging against relatively rotating surface at connection (24/595) |
FOR129 | .... And spring for axially biasing projection (24/596) |
FOR130 | ... Receiving member includes either
movable connection between cavity components
or variable configuration cavity (24/597)
|
DIGESTS | |
DIG8 | PAPER CLIPS |
DIG9 | . Sheet material |
DIG10 | . Wire |
DIG11 | ADHESIVE |
DIG13 | WEIGHTED CLIP OR CLAMP |
DIG16 | MULTIFLEX STRAP |
DIG17 | MULTIFLEX AXIAL |
DIG22 | JAW STRUCTURES, TEETH |
DIG26 | FLUID PRESSURE |
DIG28 | CO-PLANAR FLAT CLIP |
DIG29 | LAUNDRY DEVICE |
DIG30 | SEPARABLE-FASTENER OR REQUIRED COMPONENT THEREOF |
DIG31 | . With third, detached member completing interlock |
DIG32 | .. And linking cavities in adjacent parallel panels |
DIG33 | .. Third member includes independently engaged hooks for linking spaced cavities |
DIG34 | ... And movably connected, noninserted gate for closing access throat of hook |
DIG35 | .. Third member includes relatively movable, separate components |
DIG36 | ... For parachute harness |
DIG37 | .. Third member consists of unitary elongated element |
DIG38 | . Each mating member having similarly shaped, sized, and operated interlocking face |
DIG39 | .. Including elongated face having identical, parallel cross sections throughout its length |
DIG40 | .. Including elongated face having varying, parallel cross sections throughout its length |
DIG41 | .. Including complementary shaped and alternately useable interlocking faces |
DIG42 | .. Single piece hook-shaped member (e.g., mating garment hooks) |
DIG43 | . Including member having distinct formations and mating member selectively interlocking therewith |
DIG44 | .. Formations positioned along wall forming mating-member-guiding cavity |
DIG45 | ... Formations member having movably attached or biased interlocking structure |
DIG46 | .. Formations member having movably attached or biased interlocking structure |
DIG47 | .. Selectively interlocking member having movably attached or biased interlocking component |
DIG48 | ... And cavity for guiding movement of formations |
DIG49 | .. Having mounting means allowing repositioning of member for facilitating interlock |
DIG50 | . Including member having elongated, resilient, interlocking face with identical, parallel cross-sections throughout its length |
DIG51 | . Including receiving member having cavity and mating member having insertable projection guided to interlock thereby |
DIG52 | .. Having divergent interlock means distinct from cavity or projection of its member |
DIG53 | .. Projection or cavity rotates about axis of cavity access opening to interlock |
DIG54 | ... Having projection rotatably connected to its member |
DIG55 | .... And operator therefor |
DIG56 | .... And position locking-means therefor |
DIG57 | ..... Including notch or hump on projection axially biased by spring |
DIG58 | ..... Including radially biased element engaging against relatively rotating surface at connection |
DIG59 | .... And spring for axially biasing projection |
DIG60 | ... Receiving member includes either movable connection between cavity components or variable configuration cavity |